Item #: KIT-PRO-PROG -
The Arbotix-Pro Programming Kit contains an ST-Link/V2 USB Programmer and Olimex JTAG cable adapter. This programming kit is intended for advanced users only, custom programming of the Arbotix-Pro is not covered under technical support and is at the user’s own risk. Improper usage can permanently brick or destroy your Arbotix-Pro. Please pay attention to the orientation of the programming cable as improper orientation will destroy the board. The ST-LINK/V2 is an in-circuit debugger and...
Item #: IL-ARBOTIXPRO -
The Arbotix-Pro is a robotics sub-controller based around the STM32F103 Cortex M3 ARM microprocessor. It functions as a ‘brain stem’ to a main CPU, allowing users to interface to servos, sensors, lower level communication buses such as TTL serial or I2C, and power all through one convenient USB connection and communication protocol.The Arbotix-Pro is built around using Dynamixel Robot actuators and has support for both TTL or RS-485 communication, to control AX, MX, and Dynamixel-PRO actuators...
Item #: KIT-PRO -
Get going with the ArbotiX-Pro Robocontroller Starter Kit! This kit contains an ArbotiX-Pro Robocontroller, an AX/MX Power Hub, 10 200mm Dynamixel Compatible Cables, a USB-A to Micro cable, and a 12V 10A Power Supply. The Arbotix-Pro is a robotics subcontroller based around the STM32F103 Cortex M3 ARM cpu. It has support for both TTL or RS-485 communciation, to control AX, MX, and Dynamixel-PRO actuators from ROBOTIS. Interface to the main CPU of a robot is provided via USB, Xbee, or UART, all...
Item #: ASM-ARBX-CMD-V2 -
The ArbotiX Commander v2.0 is an Arduino compatible, open-source XBEE-wireless hand-held controller built specifically for controlling ArbotiX/NUKE powered walking robots (but it can be interfaced to virtually any microcontroller or PC). This gamepad style controller comes ready to be setup with the ArbotiX Robocontroller. The ArbotiX Commander v2.0 was meant to be hacked, modified, upgraded, and otherwise tinkered with, and uses a simple serial protocol to interface with other Xbee enabled...
Item #: ASM-SS-INT110B2P -
UartSBee V4 is a compact USB to serial adapter equipped with an XBEE (20pin 2.0mm) socket for use with the Xbee series of digital wireless modems. With integrated FT232 IC, it can be used for programming or communicating with MCU applications. It is similar to the Xbee Explorer USB in function, but more readily exposes the TTL serial port. Requires a USB A to Mini B cable.This pack comes with a 6pin FTDI cable. Documents Wiki How to use the UartSbee as an FTDI programmer Features Reset...
Item #: PO-1300 -
This device is a programmer for AVR-based controllers, such as our ArbotiX Robocontroller and the 3pi robot. The programmer emulates an AVRISP v2 on a virtual serial port, making it compatible with standard AVR programming software. Two additional features help with building and debugging projects: a TTL-level serial port for general-purpose communication and a SLO-scope for monitoring signals and voltage levels. The Pololu USB AVR Programmer is an extremely compact, low-cost in-system...
Item #: KIT-C-400-arbotiXv1-Starter -
The arbotiX Robocontroller Starter Kit provides everything you need to get started with this powerful new robotics controller. Do you want to free your robot of wires? Send sensory data back to your PC? Control your robot from up to 300 feet away without having to worry about interference issues inherit in most 2.4ghz technology? XBee technology is the answer. From simply 'cutting' your serial cable, to creating a wireless mesh network perfect for swarm robotics, you can take your robotics...
Item #: ASS-HW-ARBOTIX-MNT -
We held no punches in flexing our supreme engineering capabilities when designing this puppy. Seriously, look at it, it's marvelous. Flawless even. Unadulterated engineering prowess. Some might even call it a work of art. Okay, who are we kidding? It's a plastic square with some mounting holes and additional hardware. What is cool however, is that it allows you to mount an Arbotix Robocontroller to your Turtlebot or various Arbotix-needing project. It's reversible so you can tuck your Arbotix...
Item #: IL-ARBOTIXM -
The ArbotiX-M Robocontroller is at the heart of every Interbotix Robot. This versatile robot controller is an advanced control solution for BIOLOID and DYNAMIXEL based actuators. As an Arduino compatible microcontroller the Arbotix Robocontroller also benefits from a huge open source community of libraries and examples. Since its release in 2010 the Arbotix has quickly become a favorite among builders worldwide from hobby to high level research. The 'M' in ArbotiX-M stands for mini - this new...
Item #: CBL-FTDIUSB -
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated with a 0.1" pitch, 6-pin connector with the following pinout: RTS, RX, TX, 5V, CTS, GND (RTS is the green cable and GND is black). This cable has the same pinout and functionality...