Cables and Connectors

Show
USB A Male to B Male - 6ft Cable USB A to B 6ft
CBL-USBA2B
Price: $4.95 In Stock
Item #: CBL-USBA2B -

    It is a standard USB A to B cable. It is 6 feet long. It has gold plated connectors. Not much else to say. Buy one if you need it. Or don't. It won't hurt our feelings honestly.

    2.1mm DC Barrel Plug to Alligator Clips 2.1mm, dc, jack, barrel, plug, alligator, clips, power, cord, testing
    AF-1329
    Price: $1.95 In Stock
    Item #: AF-1329 -

      This 2.1mm DC Barrel Plug to Alligator Clips cable can turn any battery pack into a power supply in a snap! A high quality molded 2.1mm DC barrel plug is brought out to red (center positive) & black (ring negative) alligator clips. Good for 2-3 Amps of current, up to 24VDC. 2.1mm is near standard for electronics, and fits the Geekduino splendidly.

      6 USB Cable Extension 6, ft, foot, feet, USB, Cable, Extension, white, gold
      CBL-USBMTF-WHT
      Price: $4.95 In Stock
      Item #: CBL-USBMTF-WHT -

        Need to plug in a USB device, but it's just out of reach? Have a short USB cable with a proprietary connector? The 6' USB Extension cable is what you need! This cable has a standard USB A male connector on one end, and a standard USB A female connector on the other, allowing you to extend the reach of virtually any USB cable in your arsenal.

        Alligator Clip with Pigtail (4 Pack) Alligator Clip with Pigtail, pin header, breadboard, prototyping
        SF-CAB-13191
        Price: $2.95 In Stock
        Item #: SF-CAB-13191 -

          This is a 4 pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple part for any workbench and with these cables you will be able to easily incorporate those clips into a breadboard, development platform, or anything else that you would normally be able to attach a hookup wire to. Each Alligator Clip with Pigtail cable has a wire length of 30cm (that’s a little less than 1ft) and a male pin that easily inserts into...

          Alligator Test Leads - Multicolored (10 Pack) Alligator Test Leads, Multicolored, alligator clips, prototyping, crocodile clips
          SF-PRT-12978
          Price: $2.95 In Stock
          Item #: SF-PRT-12978 -

            Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether you’re just trying to make a few quick connections to test your circuit or having trouble making your multimeter leads stay where you need them, these spring-loaded clips are a workshop must-have. Each lead in this pack of tern is 50cm long with a rubber shrouded alligator clip on each end. There are five different colors, you get two each of: red,...

            Cold 2-Wire Splice (UY) - 10 pack cold, wire, splice, uy, crimp
            AF-1496
            Price: $2.95 In Stock
            Item #: AF-1496 -

              Get connected quickly with a Cold 2-Wire Splice (UY). These little wonders bite into any 22-26 AWG solid core wire with a quick squeeze from some parallel-jaw or slip joint pliers, making a solid butt splice connection. Though not waterproof, the splices contain silicone jelly to keep the cold splice from oxidizing.

              Cold Splice Wire Tap (UB) - 10 pack cold, wire, splice, ub, crimp
              AF-1494
              Price: $2.95 In Stock
              Item #: AF-1494 -

                Get connected quickly with a Cold Splice Wire Tap (UB). These little wonders bite into any 22-26 AWG solid core wires with a quick squeeze from some parallel-jaw or slip joint pliers, making a solid 3-way splice connection. Though not waterproof, the splices contain silicone jelly to keep the cold splice from oxidizing.

                USB Charger Doctor - In-line Voltage and Current Meter usb, charger, doctor, voltage, current, meter
                AF-1852
                Price: $7.50 In Stock
                Item #: AF-1852 -

                  The USB Charger Doctor is a handy tool that measures the working voltage and current output for any USB port and project. Plug the Doctor between a USB port and your USB device, and it will check the current draw with a 0.05 ohm resistor in line with the power pin. Data lines pass through as normal. You can use this device from 3.5-7VDC input voltage (although most USB devices tend to hover around 4.75 to 5.25) and up to 3A of current. It flips between voltage and current readouts roughly...

                  Sparkfun Cerberus USB Cable Sparkfun Cerberus USB Cable, Sparkfun, Cerberus, USB, Cable, Robot, Data, mini, micro
                  SF-CAB-12016
                  Price: $5.95 In Stock
                  Item #: SF-CAB-12016 -

                    You are in the middle of working on your latest robot, when you need to program a new board you just got in. You dig through your bin of USB cables only to find that you have hundreds that have the wrong end, and exactly zero that have the end you're looking for. As luck would have it, you remember that you ordered the Sparkfun Cerberus USB Cable! With this cable, you will always have the right connection. The Cerberus USB Cable has the standard A-type connector, which you can plug into your...

                    Phidgets 12 foot Sensor Cable Phidgets 12 foot Sensor Cable, Phidget 12 foot Sensor Cable
                    PH-3004
                    Price: $3.00 In Stock
                    Item #: PH-3004 -

                      This is a 12-foot, 3-pin cable for connecting sensors to the analog inputs on the Phidgets 8/8/8 Interface Kit. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line, follow this link. Getting Started with Phidgets Phidgets Documentation: Manuals, data sheets, and tutorials for Phidgets...

                      RobotGeek Sensor Cable Pack robotgeek, robotgeek sensor pack, robotgeek sensor cable pack, robotgeek cable pack, servo wire, 2 pin jumpers, sensor squid, pin couplers, jr female, y cable, variety pack
                      RG-SPACK
                      Price: $24.95 In Stock
                      Item #: RG-SPACK -

                        The Robot Geek Sensor Cable Pack will hook you up with all your sensor and servo wiring needs and beyond. This variety cable pack includes: 3x 3 Pin Female to Female Y Cable 1x 32 Foot Standard Servo Wire 20x 3 Pin Sensor Cable 10x 2 Pin Dual-Female Jumper Wires (300mm) 10x Sensor Squids 25x 2-Pin Couplers 25x 3-Pin Couplers ...

                        RobotGeek 150mm 3-pin Sensor Cable 10 pack
                        CBL-JRFEM150
                        Price: $4.95 In Stock
                        Item #: CBL-JRFEM150 -

                          RobotGeek Sensor Cables are for use with all RobotGeek sensors, shields, servos, and output devices. These cables are .1"(2.54mm) pitch and are 150mm in length with color coded wires. Add some 3-Pin Couplers to connect cables together for extension cables. These cables are also compatible with Phidgets Sensors and Electronic Brick Sensors, though they do not have the plastic buckle like traditional Phidgets/Electronic Brick Cables. ...

                          300mm 3-pin Female Sensor Cable 10 pack
                          CBL-JRFEM
                          Price: $4.95 In Stock
                          Item #: CBL-JRFEM -

                            RobotGeek Sensor Cables are for use with all RobotGeek sensors, shields, servos, and output devices. These cables are .1"(2.54mm) pitch and are 300mm in length with color coded wires. Add some 3-Pin Couplers to connect cables together for extension cables. These cables are also compatible with Phidgets Sensors and Electronic Brick Sensors, though they do not have the plastic buckle like traditional Phidgets/Electronic Brick Cables. ...

                            Servo Cable
                            CBL-32SEN
                            Price: $12.95 In Stock
                            Item #: CBL-32SEN -

                              Our 32 Feet Standard Servo Wire is great for repairing and extending servo and sensor cables. The Futaba Black-Red-White (Ground-Voltage-Signal) color scheme will help you keep your signals straight. This cable has 24awg stranded wire and no connectors on either end.

                              Sensor Y Cable - 100mm sensor Y cable, sensor splitter cable, servo y cable, servo splitter cable
                              CBL-3PF2Y
                              Price: $1.95 In Stock
                              Item #: CBL-3PF2Y -

                                The Sensor Y Cable is a great tool for splitting a single signal to multiple output boards. These cables are 100mm long and use a standard .1"/2.54mm pitch, making them compatible with RobotGeek I/O boards, Hobby servos, and breadboards. With this cable you can easily connect from a single output port on the RobotGeek Sensor Shield to a RobotGeek Relay, a RobotGeek LED Driver or a RobotGeek Buzzer. Combine this cable with 2 3-Pin Couplers to easily connect from 1 port to 2 Hobby Servos. You...

                                Squid Cable
                                CBL-SQUID
                                Price: $4.95 In Stock
                                Item #: CBL-SQUID -

                                  Sometimes you need to hook a servo or a sensor directly to your Arduino, or minimize the mess of jumper wires on your breadboard. These Squid Sensor Cables - 10 pack will help you do just that! On one end, you have a standard 3-pin connector (.1"/2.54mm pitch), and on the other end you have 3 single female jumper wires. You can easily position each cable exactly where you need it. and are 200mm in length. Add some 3-Pin Couplers to attach these cables directly to a servo or your arduino. These...

                                  3-Pin Couplers
                                  S-200-3P-Coupler-25pack
                                  Price: $2.95 In Stock
                                  Item #: S-200-3P-Coupler-25pack -

                                    You can use these 3 pin couplers to connect 3 pin jumper wires together and create your own extension wires. This is perfect for extending analog sensors or servos! You can also use them to make modular connectors on your breadboard/protoboard so that connecting to other components is even easier. The pins on these couplers are spaced at .1"/2.54mm, so they're compatible with Electronic Brick/Phidgets sensor cables, hobby servo cables, and most breadboards/protoboard. They are NOT compatible...

                                    4 Pin Sensor Cable 300mm 4 pin sensor cable, 4pin sensor cable, lcd sensor cable, lcd cable, 4pin cable, 4 pin cable, sensor cable
                                    CBL-4PINSEN
                                    Price: $1.95 In Stock
                                    Item #: CBL-4PINSEN -

                                      This standard 4 Pin Sensor Cable is 30cm long and has a .1"/2.54mm pitch, making it compatible with 4-pin sensors and shields. You can also add Pin Couplers and attach the cable to breadboards.

                                      RobotGeek 4 Pin Sensor Squid 300m 4 pin, sensor, cable, squid, data, 300m, jumper, breakout
                                      CBL-SQUID4P
                                      Price: $4.95 In Stock
                                      Item #: CBL-SQUID4P -

                                        Sometimes you need to hook a serial/I2C device directly to your Arduino, or minimize the mess of jumper wires on your breadboard. These 4 Pin Sensor Squid 300m cables will help you do just that! On one end, you have a standard 4-pin connector (.1"/2.54mm pitch), and on the other end you have 4 single female jumper wires. You can easily position each cable exactly where you need it. Each cable is 300m in length. Comes in pack of 10 squid cables. Pair these cables with 2-pin couplers to adapt...

                                        150mm Jumper Wires F/F (Set of 10)
                                        AC-200-PRT08430
                                        Price: $3.95 In Stock
                                        Item #: AC-200-PRT08430 -

                                          These Jumper Wires F/F (Set of 10) are great for connecting male headers from one board to another. Combine them with Male Jumpers to make even longer cables! These jumpers will fit neatly into a .1" header, so they're great for bread boards. Each pack of 10 comes with cables in 5 colors. Each cable is 150mm long

                                          2-Pin Couplers
                                          S-200-2P-Coupler-25pack
                                          Price: $2.95 In Stock
                                          Item #: S-200-2P-Coupler-25pack -

                                            You can use these 2 pin couplers to connect 2/4 pin jumper wires together and create your own extension wires. You can also use them to make modular connectors on your breadboard/protoboard so that connecting to other components is even easier. The pins on these couplers are spaced at .1"/2.54mm, so they're compatible with Electronic Brick/Phidgets sensor cables and most breadboards/protoboard. They are NOT compatible with Grove cables. ...

                                            Electronic Brick - Fully Buckled 3 Wire Cable - 5 Pack
                                            SEEED-ELB111C5M
                                            Price: $4.99 In Stock
                                            Item #: SEEED-ELB111C5M -

                                              5 pack of fully buckled 3 wire cables for the Electronic Brick family of products.

                                              Jumper Wires - Connected 6" (M/F, 20 pack)
                                              SF-PRT-12794
                                              Price: $1.95 In Stock
                                              Item #: SF-PRT-12794 -

                                                These are 6" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of 20 jumpers (colors shown). Each group of jumpers are connected to each other and can either be pulled apart in any quantity (from 1-20, of course) or kept whole based on you needs. These jumper wires can be used for pretty much everything! They work great with breadboards,...

                                                Pin Headers Experimental Pack Pin Headers Experimental Pack
                                                SS-STR131B2P
                                                Price: $7.95 Back Order
                                                Item #: SS-STR131B2P -

                                                  This pack included 41 parts of most commonly used Pin-headers. Perfect for your breadboard/protoboard project. Parts List Female 1*40 2.54mm pin headers X1 Male 1*40 2.54mm pin headers X2 Male 1*40 2.54mm pin headers, stackable Male 1*40 2.54mm pin headers, bend on board X1 Male 1*40 2.54mm pin headers, bend above board X1 Female 1*8 2.54mm pin headers, bend on board X3 Female 1*6 2.54mm pin headers, bend on board X3 Female 1*8 2.54mm pin headers, stackable X3 Female 1*6 2.54mm pin headers,...

                                                  Probe jumper wire – 8pcs
                                                  SS-CAB01101M
                                                  Price: $4.00 In Stock
                                                  Item #: SS-CAB01101M -

                                                    This is a 300mm jumper wire with probe, it is easy for connecting two point.

                                                    2 Pin Dual-Female Jumper Wire - 300mm - 10pcs pack 2 Pin, Dual, Female, Jumper, Wire, 300mm, cable
                                                    CBL-S-CAB103C4O
                                                    Price: $4.50 In Stock
                                                    Item #: CBL-S-CAB103C4O -

                                                      These 2 Pin Dual-Female Jumper Wire - 300mm - 10pcs pack are perfect for prototyping. Use them to run power from one breadboard rail to another, or use multiples to connect signals from one board to another. Each pack comes with 10 cables and each cable is 300mm long. The .1" pitch is great for standard breadboards.

                                                      9v Battery Snap Connect 9v, Battery, Snap, Connect, barrel, jack, cable, plug
                                                      CBL-9VSNP
                                                      Price: $2.95 In Stock
                                                      Item #: CBL-9VSNP -

                                                        The 9v Battery Snap Connect is the perfect companion to any 2.1*5.5mm female power jack. Whether you need to hook up to an Arduino/Geekduino Board, a Female Pigtail Lead or the AX/MX Power Hub, this cable has you covered. The tail is 10" long. Powering your project with a 9 volt battery has never been this easy. The 90 degree angle plug lets you hook up, even in tight spaces! ...

                                                        Premium USB to Micro USB Charge & Sync Cable - 6ft
                                                        CBL-USB2MICRO
                                                        Price: $6.95 In Stock
                                                        Item #: CBL-USB2MICRO -

                                                          This 6ft Micro USB Cable is perfect for powering and programming controllers like the RobotGeek Geekduino

                                                          USB A Male to Mini B (5P) M - 6ft
                                                          CBL-USBA2MINI
                                                          Price: $4.95 In Stock
                                                          Item #: CBL-USBA2MINI -

                                                            Description This USB A plug to Mini 5 pin (one ID Pin) plug is designed for USB peripherals such as cellular phones, digital devices or PDA. Introduction: With much smaller than existing USB connectors, our 5 pin (one ID Pin) provides reliable host-to-peripherals connectivity for portable/hand-help PC architecture, cellular phones and other digital devices, such as, DSC and PDA. This product is fully compliant with USB 1.1 Standard Specification.

                                                            90 Degree DC to Pigtail Cable 90, Degree, DC, Pigtail, Cable, barrel, jack
                                                            CBL-90PIGTAIL
                                                            Price: $3.95 In Stock
                                                            Item #: CBL-90PIGTAIL -

                                                              The 90 Degree DC to Pigtail Cable is the perfect companion to any 2.1*5.5mm female power jack. Whether you need to hook up to an Arduino/Geekduino Board, a Female Pigtail Lead or the AX/MX Power Hub, this cable has you covered. The tail is 10" long and splits easily. Marked side negative, unmarked positive. The 90 degree angle plug lets you hook up, even in tight spaces! ...

                                                              USB A Male to A Male USB, A, Male, to, USB A Male
                                                              CBL-USBA2A
                                                              Price: $5.95 In Stock
                                                              Item #: CBL-USBA2A -

                                                                The USB A Male to A Male cable is a strange one. With a USB A Male plug on each end, this cable allows you to hook up USB devices in non-standard ways. If you need it, you know.

                                                                Panel Mount Dual Power Cable arduino panel mount jack, panel mount power cable
                                                                CBL-RBPLUG
                                                                Price: $6.95 In Stock
                                                                Item #: CBL-RBPLUG -

                                                                  This Panel Mount Dual Power Cable is great for adding a external jack to any Arduino enclosure like the Project Box For Arduino. This cable splits from the single female DC jack (2.1*5.5mm) into a male DC jack (also 2.1*5.5) as well as two .1"/2.54mm pitch female jumper cables. The male DC jack will plug into most Arduino boards, leaving the extra power cables available for motors, relays, and more!

                                                                  GP2D12 - Sharp IR Sensor to Servo Cable
                                                                  RC-IR_Cable
                                                                  Price: $1.95 In Stock
                                                                  Item #: RC-IR_Cable -

                                                                    This cable adapts from the JST connector found on the Sharp IR sensors to a standard 3-pin servo-style connector.  This is compatible with many robot controller boards, such as those used in the Robonova and KHR humanoids.

                                                                    150mm Jumper Wires M/M (Set of 10)
                                                                    AC-200-PRT08431
                                                                    Price: $3.95 In Stock
                                                                    Item #: AC-200-PRT08431 -

                                                                      These Jumper Wires M/M (Set of 10) are great for connecting female headers from one board to another. Combine them with FeMale Jumpers to make even longer cables! These jumpers will fit neatly into a .1" header, so they're great for bread boards. Each pack of 10 comes with cables in 5 colors. Each cable is 150mm long

                                                                      Breadboard Jumper Wire - 70pcs pack Breadboard, Jumper, Wire, cable, arduino, freeduino, seeeduino
                                                                      CBL-JW-003
                                                                      Price: $7.99 In Stock
                                                                      Item #: CBL-JW-003 -

                                                                        Anyone who has ever worked with a bread board can tell you that the wiring can get very complicated very quickly. Keeping your wires color coded and solidly connected to your board can mean the difference between a sucessful circuit and having to tear everything down ans start from scratch. That's where the Breadboard Jumper Wire Pack comes in. These wires come in an assortment of colors and lengths and are designed for use with breadboards. The insulated wire is stranded, making it extremly...

                                                                        Premium Jumper Wires 140 pcs/box
                                                                        CBL-JW-001
                                                                        Price: $9.50 In Stock
                                                                        Item #: CBL-JW-001 -

                                                                          Keeping the wiring on your breadboard neat and clean is a must for any large scale protyping endeavor. That's where the Premium Jumper Wire Box comes in. Don't waste your precious time cutting and bending wires, just pull out the appropriatley sized one at a momen't notice! This set provides 10 different lengths varying from 3mm-125mm, in a variety of colors.

                                                                          3 pin Electronic Brick to 4 pin Grove converter cable (5 PCs pack) 3 pin to 4 pin adapter cable, grove to electronic brick, grove to electronic brick, convertor cable, grove to brick
                                                                          SEEED-ELE103C4O
                                                                          Price: $5.95 On Hold
                                                                          Item #: SEEED-ELE103C4O -

                                                                            Description This cable is designed to make old Electronic Bricks compatible with the new base shield (Stem).

                                                                            Electronic Brick 3 Pin to Grove converter cable - 5 pcs pack Electronic Brick to Grove converter cable - 5 pcs pack
                                                                            SS-ELE102C4O
                                                                            Price: $5.95 On Hold
                                                                            Item #: SS-ELE102C4O -

                                                                              Grove to Electronic Brick Converter Cable - 4 Pin Buckled on Grove end - 3 Pin Buckled on Brick end - 20cm - 5 pieces in pack This cable is designed to make old Electronic Bricks compatible with the new Grove Basic Shield.

                                                                              Grove  I2C Hub Grove  I2C Hub
                                                                              SS-ACC53133P
                                                                              Price: $3.95 Back Order
                                                                              Item #: SS-ACC53133P -

                                                                                I2C Hub is for connecting multiple I2C devices. The connectors are compatible with the standard Grove 4 pin cables. Documentation Product Wiki Page

                                                                                Grove - X2 Servo cable - 5 pcs Pack Grove - X2 Servo cable - 5 pcs Pack
                                                                                SEEED-ACC12159O
                                                                                Price: $5.95 On Hold
                                                                                Item #: SEEED-ACC12159O -

                                                                                  Grove Universal Cable - 4 Pin Buckled on Grove end - breaks out into 2 standard male servo - 20cm - 5 pieces in pack Use this cable to connect two servo to Grove system with only 1 cable. Brilliant!

                                                                                  Grove Universal 4 Pin Buckled 20cm Cable - 5 pcs pack Grove Universal 4 Pin Buckled 20cm Cable - 5 pcs pack
                                                                                  S-ACC904530
                                                                                  Price: $4.95 Back Order
                                                                                  Item #: S-ACC904530 -

                                                                                    Grove Universal Cable - 4 Pin Buckled - 20cm - 5 pieces in pack The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove components to the Grove Basic Shield or to other Grove compatible boards for quick prototyping. ...

                                                                                    Grove Universal 4 Pin Buckled 50cm Cable - 5 pcs pack Grove Universal 4 Pin Buckled 50cm Cable - 5 pcs pack
                                                                                    S-ACC830570
                                                                                    Price: $5.95 Back Order
                                                                                    Item #: S-ACC830570 -

                                                                                      Grove Universal Cable - 4 Pin Buckled - 50cm - 5 pieces in pack The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove components to the Grove Basic Shield or to other Grove compatible boards for quick prototyping. ...

                                                                                      Panel Mount Squid Power Cable panel mount squid, power cable panel mount, power squid cable, panel power, dc power panel mount, dc power squid
                                                                                      CBL-PSQUID
                                                                                      Price: $4.95 In Stock
                                                                                      Item #: CBL-PSQUID -

                                                                                        The Panel Mount Squid Power Cable is great for adding an external jack to any Arduino enclosure like the Project Box for Arduino. This cable offers the ability to power two things at once coming from a female DC jack (2.1*5.5mm) into two pairs of positive and negative squid cables. A great solution to power your Arduino leaving you with the ability to power motors, relays and more!