90 Degree DC to Pigtail Cable 90, Degree, DC, Pigtail, Cable, barrel, jack
Price: $3.95
Availability: In Stock
Dongguan LANO (Kale) Electronic Company Item #: CBL-90PIGTAIL -

    The 90 Degree DC to Pigtail Cable is the perfect companion to any 2.1*5.5mm female power jack. Whether you need to hook up to an Arduino/Geekduino Board, a Female Pigtail Lead or the AX/MX Power Hub, this cable has you covered. The tail is 10" long and splits easily. Marked side negative, unmarked positive. The 90 degree angle plug lets you hook up, even in tight spaces! ...

    Grove LED Grove LED, arduino LED, seeeduino LED
    Price: $2.95
    Availability: In Stock
    Seeed Studio Item #: SS-COM22341P -

      One green LED. It operates from 5V DC. Perfect for use on Seeeduino digital outputs, or also can be controlled using pulse-width modulation. Each LED has a current-limiting resistor, which protects the LED and the Arduino from high current.

      RobotGeek Temperature Sensor RobotGeek, Temperature, temp, Sensor, thermometer, environment
      Price: $6.95
      Availability: In Stock
      RobotGeek Item #: ASM-RG-TEMP -

        Want to make your project kick into gear when life turns up the heat? The RobotGeek Temperature Sensor can feel its way through! With the 3-pin Sensor Cable standard, you can easily connect this to your project and start reading the temperature! Use it to activate your air conditioner, control the temperature in a cold frame, log the temperature of a greenhouse, or to monitor the temperature of a pie on the windowsill! The options are limitless and the temperature is accounted for. As with all...

        USB A Male to A Male USB, A, Male, to, USB A Male
        Price: $5.95
        Availability: In Stock
        Item #: CBL-USBA2A -

          The USB A Male to A Male cable is a strange one. With a USB A Male plug on each end, this cable allows you to hook up USB devices in non-standard ways. If you need it, you know.

          10 Inch Stroke 110 LB Linear Actuator with Feedback large Linear Actuator, large arduino linear actuator, linear actuator for arduino
          Price: $113.95
          Availability: In Stock
          Item #: M-200-50-5-1577-10 -

            This is a 12V DC 110lb Linear Actuator from Creative Werks. (part number LACT2P) These are reliable, well built tough linear actuators. The sturdy mounting brackets make them easy to mount and won't break. If you are looking for a basic manual controller we recommend the Linear Actuator Controller kit. If you are looking to control these from an Arduino we recommend checking out the Arduino Linear Actuator tutorials below! Arduino Linear Actuator Tutorials: Preset Position Button Control of a...

            DC Squid Cable dc squid cable, squid cable, dc squid, squid cable female to male, female to male squid, 1 female to 6 male dc cable
            Price: $9.95
            Availability: In Stock
            InterbotiX Labs Item #: CBL-DCSQUID -

              Do you want to attach multiple devices to a single power supply, but don't want to splice and solder them all together? Then check out the DC Squid Cable. With this cable you can plug up to 6 devices up to one DC power supply. For example, you could connect 6 Arduino boards up to one power supply. Each barrel jack connector is 2.1*5.5mm. making it compatible with out many power supplies and wiring harnesses. Please keep in mind that it is up to the user to determine that the power supply can...

              Grove Chainable RGB LED Grove Chainable RGB LED, arduino LED, arduino RGB LED
              Price: $3.95
              Availability: In Stock
              Seeed Studio Item #: SS-COM53140P -

                The Chainable Grove RGB LED is based on P9813 chip which is a full-color LED driver chip that can provide modulated output of 256 levels. The RGB LED is chainable up to 1024 nodes. This is also an extra large LED measuring 8mm in diameter. Documentation Product Wiki Page

                Phidgets IR Distance Sensor Interface Phidgets IR Distance Sensor, Phidgets IR Sensor, Phidgets Distance Sensor, Phidgets Range Sensor
                Price: $11.00
                Availability: In Stock
                Phidgets Inc Item #: PH-1101 -

                  The Phidget IR Distance Sensor is an adapter to interface the Sharp IR distance sensors to the Phidget Interface Kit 8/8/8.  Sensor not included. Includes: Distance sensor interface board 24" Phidget sensor cable 12" Sharp sensor cable For more info, download the product manual: Product Manual You'll also need: Phidget Interface Kit 8/8/8 Sharp IR Distance Sensor Sharp GP2D12 IR Sensor (4-30") Sharp GP2Y0A02YK IR Sensor (8-60") This product is part of the Phidgets...

                  Robot Geek 9G mount
                  Price: $3.95
                  Availability: In Stock
                  RobotGeek Item #: ASM-9GM -

                    This mount works with our plastic gear 9g servo and our metal gear 9g servo.The RobotGeek 9g Mount is a simple way to mount your 9g servos to any RobotGeek deck or platform. The mount and two standoffs conform to the Robot Geek 1 X 1 CM grid used in all RobotGeek kits. The standoffs in this kit are 20mm tall.If you are looking to mount a Sharp IR Range sensor on your servo check out our IR Sensor Mounting Kit! ...

                    RobotGeek Light Sensor robotgeek light sensor, photocell, light sensor, robotgeek, arduino light sensor, arduino photocell
                    Price: $3.95
                    Availability: In Stock
                    RobotGeek Item #: ASM-RG-LIGHT -

                      This RobotGeek Light Sensor is an analog sensor that will allow you to measure light from your Arduino or other microcontroller. The more light the sensor detects, the higher the your analog port will detect. Each RobotGeek Light Sensor comes with a dual female-female jumper cable so that you can move the light sensor off the board. This makes placing your sensors easier than ever. You can use this sensor to measure the ambient light in a room, or to measure the relative brightness of...

                      Phidgets Motion Sensor Phidgets Motion Sensor, Phidgets IR Motion Sensor, IR Motion Sensor, motion sensor, Phidget Motion Sensor, Phidget IR Motion Sensor,
                      Price: $45.00
                      Availability: In Stock
                      Phidgets Inc Item #: PH-1111 -

                        This sensor is intended to be used with a Phidget Interface Kit 8/8/8 (Analog input). This sensor detects changes in infrared radiation which  occur when there is movement by a person (or object) which is different in temperature from the surroundings. As this sensor detects temperature differences, it is well suited to detecting the motion of people by their body temperature. The sensor is also characterized by a narrow sensing area. This kit includes (1) Phidget Motion Sensor and (1)...

                        12 Inch Stroke 110 LB Linear Actuator with Feedback Linear Actuator, push actuator, SPAL
                        Price: $113.95
                        Availability: In Stock
                        Item #: M-200-50-5-1577-12 -

                          This is a 12V DC 110lb Linear Actuator from Creative Werks. (part number LACT2P) These are reliable, well built tough linear actuators. The sturdy mounting brackets make them easy to mount and won't break. If you are looking for a basic manual controller we recommend the Linear Actuator Controller kit. If you are looking to control these from an Arduino we recommend checking out the Arduino Linear Actuator tutorials below! Arduino Linear Actuator Tutorials: Preset Position Button Control of a...

                          Barrel Jack Male Pigtail Lead 2.1*5.5*12mm barrel jack male, pigtail lead, power cable, cable, pigtail power,
                          Price: $2.95
                          Availability: In Stock
                          ChinaSky Item #: CBL-PIGTAIL -

                            The Barrel Jack Male Pigtail Lead 2.1*5.5*12mm is the perfect companion to any 2.1*5.5mm female power jack. Whether you need to hook up to an Arduino/Geekduino Board, a Female Pigtail Lead or the AX/MX Power Hub, this cable has you covered. The tail is 10" long and splits easily.

                            RobotGeek RCA Board RobotGeek, RCA, Board, phono, cinch, tv, a/v, jack, connector
                            Price: $5.95
                            Availability: In Stock
                            RobotGeek Item #: ASM-RG-RCA -

                              Wish you could display visual elements of your project on a standard television? Unleash your vision on the screen with the RobotGeek RCA Board! This board will allow you to hook your Arduino up to any screen with a standard RCA Jack! With another board, you can output video and sound. This is a slick way to show off sensor readings, and can even be used to make rudimentary game consoles! As with all RobotGeek sensors, the hole mounting pattern is on a 1x1 CM grid so they easily mount to the...

                              Barrel Jack Female Pigtail Lead 2.1 - 5.5mm Barrel Jack Female Pigtail Lead 2.1 - 5.5mm
                              Price: $2.95
                              Availability: In Stock
                              Item #: CS-CT5089 -

                                Are you tired of cutting the ends off your AC to DC power supplies? Yeah, so were we. So we sourced these awesome barrel jack pigtails. Now you can quickly power up to terminal blocks or solder these to your homemade switch harnesses and not molest your power supplies. The tail is 10" long and splits easily. Yes, you are welcome.

                                Linear Actuator Mounting Bracket spal, linear actuator, mounting bracket
                                Price: $14.25
                                Availability: In Stock
                                Item #: M-200-50-5-1577-B -

                                  This mounting bracket will not work for Firgelli, Actuonix or Mighty Zap linear actuators and is only intended for Creative Werks linear actuators. LINEAR ACTUATOR MOUNTING BRACKET SPAL part number LA-BRACKET-110A mounting bracket kit for use with SPAL/Creative Werks LACTP series linear actuators. Bracket and mounting pad are made from billet aluminum. Includes hardware. NOTE: This is a single bracket. If you need to mount both ends of your linear actuator you will need two brackets....

                                  RobotGeek Buzzer arduino buzzer, arduino buzzer board, arduino speaker, arduino piezo, arduino piezo board
                                  Price: $3.95
                                  Availability: In Stock
                                  RobotGeek Item #: ASM-RG-BUZZER -

                                    Get buzzing with this Arduino Buzzer! The RobotGeek Buzzer is an easy way to add audio output to your Arduino. By simply sending a 5v signal to the RobotGeek Buzzer, the device will emit a tone. You can also use the Arduino Tone Function to send different tones to the buzzer. NOTE:some frequencies will work better than others with this piezo buzzer. This Arduino Buzzer has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running...

                                    Phidgets Magnetic Sensor Phidgets Magnetic Sensor, Phidgets Magnetic Sensor, Phidgets Analog Magnetic Sensor, Analog Magnetic Sensor, USB Magnetic Sensor, Phidget magnetometer
                                    Price: $11.00
                                    Availability: In Stock
                                    Phidgets Inc Item #: PH-1108 -

                                      Linear Hall Effect Sensor. This ratiometric Hall-effect sensor provides a voltage output that is proportional to the applied magnetic field. Includes 60cm sensor cable. Board Dimensions: 3.0 x 3.0 cm Mounting Holes: 2.3 x 2.3 cm" This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line,...

                                      Robot Geek Relay
                                      Price: $4.95
                                      Availability: In Stock
                                      RobotGeek Item #: ASM-RG-RELAY -

                                        Time to step up the voltage with this Arduino Relay Board. The Arduino platform is a great way to control lights, buzzers, displays and more - but what if you have a device that doesn't run on the Arduino's native 5 volts? One simple way to do it is to use the RobotGeek Relay. This little relay board will use a signal from a 5v microcontroller to make a mechanical connection. This connection is physically seprated from the arduino, meaning you can connect devices that have different voltages...

                                        10 Foot Extension Wire spal, linear actuator, actuator controller, wiring harness
                                        Price: $25.95
                                        Availability: In Stock
                                        Item #: M-200-50-5-1577-H -

                                          10 FOOT EXTENSION HARNESS Creative Werks part number LA-EXTHARN. Ten foot wiring harness allows a Creative Werks 12 VDC 110 lb. linear actuator to be mounted up to ten feet away from the actuator controller. SPECIFICATIONS 10 feet long Shpg. 1/4 lb.

                                          Phidgets Vibration Sensor Phidgets Vibration Sensor, Phidget Vibration Sensor, Vibration Sensor, Analog Vibration Sensor, USB Vibration Sensor
                                          Price: $11.00
                                          Availability: In Stock
                                          Phidgets Inc Item #: PH-1104 -

                                            Piezoelectric Vibration sensor. This sensor buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. Comes with a 60cm sensor cable. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire...

                                            Panel Mount Dual Power Cable arduino panel mount jack, panel mount power cable
                                            Price: $6.95
                                            Availability: In Stock
                                            Goodwell Electrical Item #: CBL-RBPLUG -

                                              This Panel Mount Dual Power Cable is great for adding a external jack to any Arduino enclosure like the Project Box For Arduino. This cable splits from the single female DC jack (2.1*5.5mm) into a male DC jack (also 2.1*5.5) as well as two .1"/2.54mm pitch female jumper cables. The male DC jack will plug into most Arduino boards, leaving the extra power cables available for motors, relays, and more!

                                              RobotGeek Voltage Divider RobotGeek Voltage Divider, Robot Geek Voltage Divider, Voltage Divider, FSR Voltage Divider, Force Sensitive Resistor Voltage Divider, FSR Interface, FSR Analog Interface
                                              Price: $4.95
                                              Availability: In Stock
                                              RobotGeek Item #: ASM-RG-VOLTDIV -

                                                The RobotGeek Voltage Divider is a simple yet effective way to turn a variable resistor, such as an FSRs, Softpots, or Pressure Sensors into a tunable 0-5v analog signal. The design is super simple and completely open source, but saves tinkerers from having to breadboard a potentiometer of their own. A 2 position terminal block and 0.1" spaced header are available for sensor input, a 3 pos right angle header breaks out Analog output, 5v input, and Gnd. Each sensor includes necessary...

                                                Ultra Sonic Range Measurement Module Ultra Sonic Range Measurement Module
                                                Price: $15.00
                                                Availability: Back Order
                                                Seeed Studio Item #: SS-SEN136B5B -

                                                  This is a non-contact distance measurement module designed for easy use. Features Detecting range: 3cm-4m Best in 30 degree angle Electronic brick compatible interface 5VDC power supply Breadboard friendly Dual transducer Arduino library ready Product WIKI Page. ...

                                                  4X DC-DC Converter - 3A 5V Mini BEC ( UBEC ) 4X, DC, Converter, 3A, 5V, Mini, BEC, UBEC, voltage, regulator
                                                  Price: $4.95
                                                  Availability: In Stock
                                                  Banggood Item #: BG-MINIBEC -

                                                    A BEC (battery elimination circuit) is a great tool for getting a lower voltage from a higher voltage system. For example, say you needed 5v to drive a Mini Turbo Fan on your 7.4v Hovercraft, but you didn't want to add a secondary battery just for the 5v fan. Simply plug this BEC into your Hovercraft's battery and you'll get a stable 5v 3A power supply. The 4X DC-DC Converter - 3A 5V Mini BEC is a small and lightweight UBEC, featuring a High efficiency switch mode design that provides better...

                                                    2.1/5.5mm Jack to 2.5/5.5mm Plug Adapter 2.1/5.5mm Jack to 2.5/5.5mm Plug Adapter
                                                    Price: $3.95
                                                    Availability: In Stock
                                                    Top Power Co Item #: POW-plug-adapter -

                                                      This is an adapter that converts a 2.1/5.5mm Jack into a 2.5/5.5mm Plug. This will adapt our 2.1/5.5mm plug power supplies into a 2.5/5.5mm plug.

                                                      Seeeduino Mega Seeeduino, V2.2, Atmega 328P, duemilanove, freeduino, arduino, diecimila, mega
                                                      Price: $49.50
                                                      Availability: In Stock
                                                      Seeed Studio Item #: SS-ARD121D2P -

                                                        Overview Seeeduino Mega is a microntrolller board based on ATmega1280, derived from Arduino Mega with changes in pursuit for small form factor, flexibility and functionality.It has 70 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with...

                                                        Gravity Mounting Kit Gravity, Mounting, Mount, Mounts, Kit, DFRobot, series, acrylic, hardware
                                                        Price: $6.99
                                                        Availability: In Stock
                                                        RobotGeek Item #: ASM-DF-GRAVITY-MNT -

                                                          The Gravity Mounting Kit is your key to firmly affixing Sensors in DFRobot's Gravity Series to your RobotGeek Workbench or Geekbot! Each Kit comes with 3 Adapter Plates and all the hardware you'll need to mount 3 sensors. DFRobot's Gravity Series Sensors work well with the RobotGeek Sensor Shield, Sharing the same 3-pin headers as RobotGeek Sensors. With these plates, Gravity Sensors mount in the same way as RobotGeek Sensors, making for a well integrated system! ...

                                                          Grove Mounting Kit grove mounting kit sensors mount
                                                          Price: $7.95
                                                          Availability: In Stock
                                                          RobotGeek Item #: ASM-GROVE-MOUNT -

                                                            The Grove Mounting Kit is great solution to bring Grove sensors into the RobotGeek realm. Each sensor mount conforms to the centimeter grid pattern, making it mountable on workbenches, Geekbots, PhantomX Hexapod top decks- anything that follows the centimeter grid!The kit includes 8x small mounts (Grove two-hole sensors) and 4x large mounts Grove three-hole sensors), M3x6mm bolts, M2x6mm bolts, M2mm nuts and M3x10mm F/F stand-offs.*RobotGeek workbench pictured sold separately.   ...

                                                            RobotGeek Laser robotgeek laser, robot geek laser, laser, arduino laser,
                                                            Price: $5.95
                                                            Availability: In Stock
                                                            RobotGeek Item #: ASM-RG-LASER -

                                                              The RobotGeek Laser is an easy way to add a red laser to your robot! Just plug the black wire into ground and the white wire into a 5v signal, and the laser will power on. The .1"/2.54mm female headers make it easy to plug into breadboards, jumper wires, standard header pins and more. With this laser you'll get three different mounting solutions! These solutions mean that you can spend less time figuring out how to mount the laser and more time firing lasers! You can even use couplers to...

                                                              RobotGeek IR Receiver RobotGeek, IR, infrared, Receiver, infra, red
                                                              Price: $6.95
                                                              Availability: In Stock
                                                              RobotGeek Item #: ASM-RG-IRRECEIVER -

                                                                Want a simple untethered control solution for your next project? The RobotGeek IR Receiver has you in its line of sight! This infrared receiver will pick up signal from any remote that sends an infrared signal, or can receive from another ~duino sending signals with the RobotGeek IR Transmitter! As with all RobotGeek sensors, the hole mounting pattern is on a 1x1 CM grid so they easily mount to the RobotGeek Workbenches or any other RobotGeek kit. Each sensor includes a mounting plate and all...

                                                                RobotGeek IR Transmitter RobotGeek, IR, infrared, Transmitter
                                                                Price: $5.95
                                                                Availability: In Stock
                                                                RobotGeek Item #: ASM-RG-TRANSMITTER -

                                                                  Want your next project to send a clear signal? The RobotGeek IR Transmitter can send data to various devices in your sights! Use it to control your TV, or send signals to another ~duino outfitted with a RobotGeek IR Receiver! As with all RobotGeek sensors, the hole mounting pattern is on a 1x1 CM grid so they easily mount to the RobotGeek Workbenches or any other RobotGeek kit. Each sensor includes a mounting plate and all hardware needed to mount to any workbench or RobotGeek product that has...

                                                                  RobotGeek Webcam with Mounts webcam, robot webcam, robot vga webcam, bioloid frame camera, bioloid webcam, bioloid camera, robot camera with mounts
                                                                  Price: $29.95
                                                                  Availability: In Stock
                                                                  InterbotiX Labs Item #: ASM-CMRAMNT -

                                                                    Have you ever needed a small, mountable camera for your robot or vision project? Then take a look at the Robot VGA Webcam with Mounts! This tiny webcam will geneate a 640x480px video at 30fps. The Robot VGA Webcam is great for robots of all types and sized, including our Robotic Arms and Turrets. The included mounting plates make attaching the camera to your robot a snap.

                                                                    RobotGeek 1" Pastic Ball Caster
                                                                    Price: $4.95
                                                                    Availability: Back Order
                                                                    RobotGeek Item #: ASM-RG-CASTER -

                                                                      A simple but effective design, the Robot Geek 1-inch Ball Caster is meant to keep your mobile platform moving freely. Laser-cut Acrylic parts with an array of standoffs make assembly and mounting of various sizes easy. The 1-inch Acetal ball’s natural lubricity and resistance to moisture are advantageous to any mobile robotics platform. The total height of this ball caster is 1.1" with no spacers, you can also adjust the height by adding spacers and standoffs. Additional mounting standoffs and...

                                                                      GP2D12 - Sharp IR Sensor to Servo Cable
                                                                      Price: $1.95
                                                                      Availability: In Stock
                                                                      Lynxmotion Item #: RC-IR_Cable -

                                                                        This cable adapts from the JST connector found on the Sharp IR sensors to a standard 3-pin servo-style connector.  This is compatible with many robot controller boards, such as those used in the Robonova and KHR humanoids.

                                                                        LifeCam Cinema Webcam - 720p HD (With Mount) Microsoft LifeCam Cinema Webcam  720p HD, HD robot camera, USB robot camera
                                                                        Price: $69.95
                                                                        Availability: In Stock
                                                                        Microsoft Item #: ASS-CAM-H5D-00001 -

                                                                          The Microsoft LifeCam Cinema Webcam - 720p HD is a high resolution advanced USB camera, perfect for use in all robotics projects, pan/tilt robot turrets, and/or with Roborealm. It is Linux-compatible using the Linux UVC Driver.The Lifecam Cinema Webcam kit comes with all the necessary hardware to mount to any Interbotix turret as well as all RobotGeek products that feature the 1 x 1 centimeter grid pattern. Just simply remove the rubber holder from the camera using a 00 Phillips screw driver...

                                                                          RobotGeek Wii Adaptor w/ Cable
                                                                          Price: $5.95
                                                                          Availability: In Stock
                                                                          RobotGeek Item #: KIT-WIIADP -

                                                                            Add a Wii controller to your robotics project quickly and easily using our new RobotGeek Wii Adapter w/ Cable. It can be used with either the Wii NunChuk Joystick or Classic Pro Controller. Whether you've got a robot, turret, rover, or other Arduino project: adding one (or more) of the familiar and well-designed Wii controllers to your build can greatly simplify the control setup process. This item is intended for those who already have a Wii controller or plan to purchase one separately. See...

                                                                            UartSBee V5 (USB-Xbee-TTL Interface) USB, TTL, Xbee, Converter. V4
                                                                            Price: $24.95
                                                                            Availability: In Stock
                                                                            Seeed Studio Item #: ASM-SS-INT110B2P -

                                                                              DescriptionUartSBee v5' is FTDI cable compatible USB to Serial adapter equipped with BEE socket(20pin 2.0mm). The integrated FT232RL can be used for programming or communicating with MCUs. On the other hand, you might connect your PC to various wireless applications via a Bee compatible module. UartSBee provides breakouts for the bit-bang mode pins of FT232RL as well.This Bit-bang mode pins (8 I/O pins) can be used as a replacement for applications involving PC parallel port which is scares...

                                                                              Gear Motor Wheel - Single GM wheel, gear motor wheel, gearmotor wheel, acrylic wheel, robot wheel, motor wheel
                                                                              Price: $3.50
                                                                              Availability: In Stock
                                                                              RobotGeek Item #: ASM-GMW -

                                                                                Do you need a wheel for your latest rover? Try our new Gear Motor Wheels! These wheels are made of a red acrylic, wrapped in a black rubber tire. Each 9cm diameter, 1cm thick wheel has a double-flat, 7mm in diameter hole -perfect for our RG 90 Gear Motors! Just use the included hardware to attach the wheels to the motors and your robot will be rolling in no time.

                                                                                USB AVR Programmer USB, AVR Programmer, Arduino, Diecimila, Arduino Board, Arduino Kit, Arduino Diecimila USB IO Board, Arduino IO Board, Arduino Diecimila, Arduino Diecimila Board
                                                                                Price: $19.95
                                                                                Availability: In Stock
                                                                                Pololu Item #: PO-1300 -

                                                                                  This device is a programmer for AVR-based controllers, such as our ArbotiX Robocontroller and the 3pi robot. The programmer emulates an AVRISP v2 on a virtual serial port, making it compatible with standard AVR programming software. Two additional features help with building and debugging projects: a TTL-level serial port for general-purpose communication and a SLO-scope for monitoring signals and voltage levels. The Pololu USB AVR Programmer is an extremely compact, low-cost in-system...

                                                                                  FTDI Basic Breakout - 5V FTDI, Basic Breakout 5V, USB, TTL, Converter
                                                                                  Price: $14.95
                                                                                  Availability: In Stock
                                                                                  SparkFun Item #: SF-DEV-09716 -

                                                                                    This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be...

                                                                                    150mm Jumper Wires M/M (Set of 10)
                                                                                    Price: $3.95
                                                                                    Availability: In Stock
                                                                                    SparkFun Item #: AC-200-PRT08431 -

                                                                                      These Jumper Wires M/M (Set of 10) are great for connecting female headers from one board to another. Combine them with FeMale Jumpers to make even longer cables! These jumpers will fit neatly into a .1" header, so they're great for bread boards. Each pack of 10 comes with cables in 5 colors. Each cable is 150mm long

                                                                                      2.1mm DC Jack to JST
                                                                                      Price: $2.95
                                                                                      Availability: In Stock
                                                                                      Seeed Studio Item #: SS-ARD101C4O -

                                                                                        This is a 2.1mm to JST adapter for powering the Seeeduino microcontrollers directly from one of our 6v 2A power supplies.

                                                                                        20 in 1 Basic Components Mixed Pack
                                                                                        Price: $4.95
                                                                                        Availability: In Stock
                                                                                        Seeed Studio Item #: SS-COM103B2P -

                                                                                          Resistors, capaitors, and LEDs - these components are found in almost every electronic device known to man. This pack is a perfect mix of these components, so that you'll be ready for all sorts of projects. This pack contains: Resistors 2.2Ω X 10 10Ω X 10 47Ω X 10 100Ω X 10 680Ω X 10 1kΩ X 10 10kΩ X 10 22kΩ X 10 68kΩ X 10 100kΩ X 10 330kΩ X 10 1MΩ X 10 Ceramic Capacitor 100pF X 10 10nF X 10 100nF X 10 2.2nF X 10 Electrolytic capacitor...

                                                                                          Breadboard Jumper Wire - 70pcs pack Breadboard, Jumper, Wire, cable, arduino, freeduino, seeeduino
                                                                                          Price: $7.99
                                                                                          Availability: In Stock
                                                                                          Seeed Studio Item #: CBL-JW-003 -

                                                                                            Anyone who has ever worked with a bread board can tell you that the wiring can get very complicated very quickly. Keeping your wires color coded and solidly connected to your board can mean the difference between a sucessful circuit and having to tear everything down ans start from scratch. That's where the Breadboard Jumper Wire Pack comes in. These wires come in an assortment of colors and lengths and are designed for use with breadboards. The insulated wire is stranded, making it extremly...

                                                                                            Electronic Brick - Touch Sensor Electronic Brick, Touch, Sensor, arduino, seeeduino, freeduino
                                                                                            Price: $6.50
                                                                                            Availability: In Stock
                                                                                            Seeed Studio Item #: SS-ELB142D2P -

                                                                                              This is a simple touch sensor brick, it used TTP223 touch detector IC, you can use this brick to replace the traditional physical push button and add some cool elements to your project. This sensor outputs a digital 5v signal and is plug-n-play compatible with the Electronic Brick system. Yes! We can build electronics projects just as easy as piling bricks. The Arduino/Freeduino movement has made programming and physical computing easier than ever. The Electronic Brick system simplifies the...

                                                                                              Electronic Brick Chassis V1.1 Electronic, Brick, Chassis, V1.1, arduino, freeduino, seeeduino
                                                                                              Retail: $14.50
                                                                                              Price: $5.00
                                                                                              Availability: In Stock
                                                                                              Seeed Studio Item #: SS-ELB127E4P -

                                                                                                Electronic Brick Chassis is a modular 'plug n play' style dedicated Arduino, Seeeduino, and Freeduino interface shield. It breaks out your Duino's available I/O with convenient 3-pin ports and data buses. Plug in a variety of Phidgets & Electronic Brick Sensors, Inputs, Outputs, and Accessories! Yes! We can build electronics projects just as easy as piling bricks. The Arduino/Freeduino movement has made programming and physical computing easier than ever. The Electronic Brick...

                                                                                                JST 2 Pin Power Connector
                                                                                                Price: $2.95
                                                                                                Availability: In Stock
                                                                                                Seeed Studio Item #: SS-ARD110C4B -

                                                                                                  JST 2 Pin power connector Use for making custom power supplies for the Seeeduino Boards Length:100mm

                                                                                                  Premium Jumper Wires 140 pcs/box
                                                                                                  Price: $9.50
                                                                                                  Availability: In Stock
                                                                                                  Seeed Studio Item #: CBL-JW-001 -

                                                                                                    Keeping the wiring on your breadboard neat and clean is a must for any large scale protyping endeavor. That's where the Premium Jumper Wire Box comes in. Don't waste your precious time cutting and bending wires, just pull out the appropriatley sized one at a momen't notice! This set provides 10 different lengths varying from 3mm-125mm, in a variety of colors.

                                                                                                    Getting Started with the Internet of Things Getting Started with the Internet of Things
                                                                                                    Price: $24.99
                                                                                                    Availability: In Stock
                                                                                                    Secret Labs LLC Item #: SL-NetduinoBK -

                                                                                                      This book is the companion guide to the Netduino Plus. What is the Internet of Things? It's billions of embedded computers, sensors, and actuators all connected online. If you have basic programming skills, you can use these powerful little devices to create a variety of useful systems—such as a device that waters plants when the soil becomes dry. This hands-on guide shows you how to start building your own fun and fascinating projects. Learn to program embedded devices using the .NET Micro...

                                                                                                      BattleSwitch radio controlled 10A relay
                                                                                                      Price: $24.99
                                                                                                      Availability: Back Order
                                                                                                      Dimension Engineering Item #: C-200-BattleSwitch -

                                                                                                        BattleSwitch is the larger, 10A version of the popular PicoSwitch. BattleSwitch is a relay switch that you toggle via hobby radio control gear. You can use BattleSwitch to quickly and easily control glow plugs, BattleBot weaponry and more. You can activate applications with voltage levels as high as 240VAC without having to know anything about microcontroller logic levels or transistors because the relay offers full electrical isolation from your receiver electronics. BattleSwitch plugs into a...

                                                                                                        Parallax (Futaba) Continuous Rotation Servo servo, servos, continuous rotation servo, continuous servo
                                                                                                        Price: $13.99
                                                                                                        Availability: In Stock
                                                                                                        Parallax Item #: PX-900-00008 -

                                                                                                          The Parallax Continuous Rotation Servo is a Futaba S148 servo. It's recommended for robotics projects and includes an adjustable potentiometer to center the servo. Servos may be controlled directly from a BASIC Stamp I/O pin by using the PULSOUT command. Servo has been modified for continuous rotation. NOTES:This continuous rotation servo only work with the following brackets: E-Z Aluminum Servo Bracket , Multi-Purpose Servo Bracket, & Aluminum Servo Bracket (may need some custom...

                                                                                                          Phidgets Dual Relay Board Phidgets Dual Relay Board, Phidget Dual Relay Board, phidgets relay board, relay board
                                                                                                          Price: $19.00
                                                                                                          Availability: In Stock
                                                                                                          Phidgets Inc Item #: PH-3051 -

                                                                                                            The Dual Relay Board is an accessory to the PhidgetInterfaceKit 8/8/8. Each relay can be controlled by a separate Digital Output and can control open or close a circuit up to 240VAC at 5Amps. The relay board uses 1 analog input jack for it's power connection. Board Dimensions: 5.3 x 4.5 cm Mounting Holes: 4.6 x 3.8 cm This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors,...

                                                                                                            Phidgets SSR Relay Phidgets SSR Relay, Phidgets Relay Board, Phidget SSR Relay, Phidget Relay Board
                                                                                                            Price: $15.00
                                                                                                            Availability: Back Order
                                                                                                            Phidgets Inc Item #: PH-3052 -

                                                                                                              The Solid State Relay is used to switch up to 2.5 Amps at up to 40 Volts DC, or 28 Volts AC. The relay board is controlled by a digital output on the PhidgetInterfaceKit 8/8/8, the PhidgetTextLCD 8/8/8, or the PhidgetRFID v2.0 and greater. Product Manual This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire...

                                                                                                              PicoSwitch PWM Controlled Relay io board, switch
                                                                                                              Price: $19.99
                                                                                                              Availability: Back Order
                                                                                                              Dimension Engineering Item #: C-200-PICO -

                                                                                                                Product Description PicoSwitch is a relay switch that you toggle via hobby radio control gear. You can use PicoSwitch to quickly and easily control anything from a digital camera shutter to an electric squirt gun to home lighting and more. You can activate applications with voltage levels as high as 125VAC without having to know anything about microcontroller logic levels or transistors because the relay offers full electrical isolation from your receiver electronics. PicoSwitch plugs into a...

                                                                                                                1.5mm Hex Screwdriver 1.5mm precision screwdriver, 1.5mm screwdriver, 1.5mm hex driver, 1.5mm hex screwdriver, 1.5 mm
                                                                                                                Price: $7.95
                                                                                                                Availability: In Stock
                                                                                                                Wiha Item #: DRV-92415 -

                                                                                                                  German Wiha precision 1.5 Driver.

                                                                                                                  18" x 24" 25LB Floor Mat Switch floor mat switch, pressure floor mat switch, sealed pressure floor mat switch, sealed floor mat switch, sealed floor mat
                                                                                                                  Price: $99.95
                                                                                                                  Availability: Back Order
                                                                                                                  United Security Item #: US-903 -

                                                                                                                    Floor Mat switches are great for all sorts of projects, but sometimes you need something a little more heavy-duty than our Standard Floor Mat Switches, sometimes you need a ruggedized 18" x 24" 25LB Floor Mat Switch These Floor Mats are ruggedized and waterproofed making them ideal for high traffic areas, both indoors and outdoors. The Switch Floor Mat is a perfect solution for monitoring security points, inventory, and more. The mat is most often used in security applications but it can also...

                                                                                                                    18" x 24" 60LB Floor Mat Switch sealed pressure floor mat, floor mat, floor mat switch, pressure floor mat switch, 60lb floor mat switch, pressure switch
                                                                                                                    Price: $105.95
                                                                                                                    Availability: Back Order
                                                                                                                    United Security Item #: US-903PR -

                                                                                                                      Floor Mat switches are great for all sorts of projects, but sometimes you need something a little more heavy-duty than our Standard Floor Mat Switches, sometimes you need a ruggedized 18" x 24" 60LB Floor Mat Switch This version of the Floor Mat is pet resistant and designed to trigger at 60lbs. These Floor Mats are ruggedized and waterproofed making them ideal for high traffic areas, both indoors and outdoors. The Switch Floor Mat is a perfect solution for monitoring security points,...

                                                                                                                      2.0mm  Hex Screwdriver 2.0mm hex screwdriver, 2.0mm hex driver, 2.0mm driver, 2.0mm hex, 2.0mm
                                                                                                                      Price: $3.95
                                                                                                                      Availability: In Stock
                                                                                                                      InterbotiX Labs Item #: DRV-H20 -

                                                                                                                        Save yourself plenty of time and work with a driver instead of a hex key. These 2.0mm hex drivers have a nice grip and turning cap on the rear end to help you move quick. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good driver wrench that will lost a long time.

                                                                                                                        2.5mm Hex Screwdriver 2.5mm screwdriver, 2.5mm hex screwdriver, 2.5mm hex driver, 2.5mm hex, 2.5mm driver
                                                                                                                        Price: $3.95
                                                                                                                        Availability: In Stock
                                                                                                                        InterbotiX Labs Item #: DRV-H25 -

                                                                                                                          Save yourself plenty of time and work with a driver instead of a hex key. These 2.5mm hex drivers have a nice grip and turning cap on the rear end to help you move quick. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong driver that will lost a long time.

                                                                                                                          3 pin Electronic Brick to 4 pin Grove converter cable (5 PCs pack) 3 pin to 4 pin adapter cable, grove to electronic brick, grove to electronic brick, convertor cable, grove to brick
                                                                                                                          Price: $5.95
                                                                                                                          Availability: On Hold
                                                                                                                          Seeed Studio Item #: SEEED-ELE103C4O -

                                                                                                                            Description This cable is designed to make old Electronic Bricks compatible with the new base shield (Stem).

                                                                                                                            37D mm Metal Gearmotor Bracket Pair 37D mm Metal Gearmotor Bracket Pair, Gearmotor Bracket, Pololu, 37D mm Metal Gearmotor, Robot Bracket, Robot Motor Bracket
                                                                                                                            Price: $7.95
                                                                                                                            Availability: In Stock
                                                                                                                            Pololu Item #: PO-1084 -

                                                                                                                              These light-weight brackets (under 15 g each) are specifically designed for the Pololu 37D mm metal gearmotors, such as the 19:1 metal gearmotor 37Dx52L mm and the 19:1 metal gearmotor 37Dx52L mm with 64 CPR encoder. Each bracket features seven mounting holes for M3 or #4-size screws along each edge, giving you a variety of mounting options. A total of twelve M3 screws (six for each bracket) are included for securing the motor to the bracket. NOTE: This set contains 2 brackets and DOES NOT...

                                                                                                                              9" x 15" 25LB Floor Mat Switch sealed pressure mat, pressure mat, pressure mat sensor, 25lb pressure mat
                                                                                                                              Price: $39.95
                                                                                                                              Availability: Back Order
                                                                                                                              United Security Item #: US-901 -

                                                                                                                                Floor Mat switches are great for all sorts of projects, but sometimes you need something a little more heavy-duty than our Standard Floor Mat Switches, sometimes you need a ruggedized 9" x 15" 25LB Floor Mat Switch These Floor Mats are ruggedized and waterproofed making them ideal for high traffic areas, both indoors and outdoors. The Switch Floor Mat is a perfect solution for monitoring security points, inventory, and more. The mat is most often used in security applications but it can also...

                                                                                                                                9" x 15" 60LB Floor Mat Switch floor mat switch, pressure floor mat switch, sealed pressure floor mat switch, sealed pressure mat,
                                                                                                                                Price: $49.95
                                                                                                                                Availability: In Stock
                                                                                                                                United Security Item #: US-901PR -

                                                                                                                                  Floor Mat switches are great for all sorts of projects, but sometimes you need something a little more heavy-duty than our Standard Floor Mat Switches, sometimes you need a ruggedized 9" x 15" 60LB Floor Mat Switch. This version of the Floor Mat is pet resistant and designed to trigger at 60lbs. These Floor Mats are ruggedized and waterproofed making them ideal for high traffic areas, both indoors and outdoors. The Switch Floor Mat is a perfect solution for monitoring security points,...

                                                                                                                                  DC Extension Cable - 60CM dc extension cable, 60cm dc extension cable, extension cable, power extension, power extension cable, 600mm extension power cable, power cable
                                                                                                                                  Price: $4.95
                                                                                                                                  Availability: In Stock
                                                                                                                                  InterbotiX Labs Item #: CBL-DCMF60 -

                                                                                                                                    This simple DC Extension Cable will help you clean up your robot's wiring and reduce wire splicing and soldering. Each cable is 60cm long and has a 2.1*5.5mm barrel jack, making it compatible with many of our power supplies and wiring harnesses.

                                                                                                                                    Electronic Brick 3 Pin to Grove converter cable - 5 pcs pack Electronic Brick to Grove converter cable - 5 pcs pack
                                                                                                                                    Price: $5.95
                                                                                                                                    Availability: On Hold
                                                                                                                                    Seeed Studio Item #: SS-ELE102C4O -

                                                                                                                                      Grove to Electronic Brick Converter Cable - 4 Pin Buckled on Grove end - 3 Pin Buckled on Brick end - 20cm - 5 pieces in pack This cable is designed to make old Electronic Bricks compatible with the new Grove Basic Shield.

                                                                                                                                      FTDI Cable 5V FTDI Cable 5V
                                                                                                                                      Price: $17.95
                                                                                                                                      Availability: In Stock
                                                                                                                                      SparkFun Item #: CBL-FTDIUSB -

                                                                                                                                        The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated with a 0.1" pitch, 6-pin connector with the following pinout: RTS, RX, TX, 5V, CTS, GND (RTS is the green cable and GND is black). This cable has the same pinout and functionality...

                                                                                                                                        Grove  I2C Hub Grove  I2C Hub
                                                                                                                                        Price: $3.95
                                                                                                                                        Availability: Back Order
                                                                                                                                        Item #: SS-ACC53133P -

                                                                                                                                          I2C Hub is for connecting multiple I2C devices. The connectors are compatible with the standard Grove 4 pin cables. Documentation Product Wiki Page

                                                                                                                                          Grove - X2 Servo cable - 5 pcs Pack Grove - X2 Servo cable - 5 pcs Pack
                                                                                                                                          Price: $5.95
                                                                                                                                          Availability: On Hold
                                                                                                                                          Seeed Studio Item #: SEEED-ACC12159O -

                                                                                                                                            Grove Universal Cable - 4 Pin Buckled on Grove end - breaks out into 2 standard male servo - 20cm - 5 pieces in pack Use this cable to connect two servo to Grove system with only 1 cable. Brilliant!

                                                                                                                                            Grove Universal 4 Pin Buckled 20cm Cable - 5 pcs pack Grove Universal 4 Pin Buckled 20cm Cable - 5 pcs pack
                                                                                                                                            Price: $4.95
                                                                                                                                            Availability: Back Order
                                                                                                                                            Seeed Studio Item #: S-ACC904530 -

                                                                                                                                              Grove Universal Cable - 4 Pin Buckled - 20cm - 5 pieces in pack The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove components to the Grove Basic Shield or to other Grove compatible boards for quick prototyping. ...

                                                                                                                                              Grove Universal 4 Pin Buckled 50cm Cable - 5 pcs pack Grove Universal 4 Pin Buckled 50cm Cable - 5 pcs pack
                                                                                                                                              Price: $5.95
                                                                                                                                              Availability: Back Order
                                                                                                                                              Seeed Studio Item #: S-ACC830570 -

                                                                                                                                                Grove Universal Cable - 4 Pin Buckled - 50cm - 5 pieces in pack The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove components to the Grove Basic Shield or to other Grove compatible boards for quick prototyping. ...

                                                                                                                                                Hex Key - 1.5mm Hex Key - 1.5mm
                                                                                                                                                Price: $1.99
                                                                                                                                                Availability: In Stock
                                                                                                                                                Wiha Item #: HEX-15603 -

                                                                                                                                                  These are very strong American made Hex keys. A bolt will strip out before these wrenches will. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong wrench that will lost a long time.

                                                                                                                                                  Hex Key - 1/16 Inch Hex Key - 1/16 Inch
                                                                                                                                                  Price: $1.99
                                                                                                                                                  Availability: In Stock
                                                                                                                                                  Wiha Item #: HEX-15204 -

                                                                                                                                                    These are very strong American made Hex keys. A bolt will strip out before these wrenches will. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong wrench that will lost a long time.

                                                                                                                                                    Hex Key - 2.0mm Hex Key - 2.0mm
                                                                                                                                                    Price: $1.99
                                                                                                                                                    Availability: In Stock
                                                                                                                                                    Wiha Item #: HEX-15604 -

                                                                                                                                                      These are very strong American made Hex keys. A bolt will strip out before these wrenches will. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong wrench that will lost a long time.

                                                                                                                                                      Hex Key - 2.5mm Hex Key - 2.5mm
                                                                                                                                                      Price: $1.99
                                                                                                                                                      Availability: In Stock
                                                                                                                                                      Wiha Item #: HEX-15605 -

                                                                                                                                                        These are very strong American made Hex keys. A bolt will strip out before these wrenches will. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong wrench that will lost a long time.

                                                                                                                                                        Hex Key - 5/64 Inch Hex Key - 5/64 Inch
                                                                                                                                                        Price: $1.99
                                                                                                                                                        Availability: In Stock
                                                                                                                                                        Wiha Item #: HEX-15205 -

                                                                                                                                                          These are very strong American made Hex keys. A bolt will strip out before these wrenches will. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong wrench that will lost a long time.

                                                                                                                                                          Hex Key Variety Pack hex key variety pack, 1.5mm hex key, 2.0mm hex key, 2.5mm hex key, 3.0mm hex key, 4.0mm hex key
                                                                                                                                                          Price: $7.95
                                                                                                                                                          Availability: In Stock
                                                                                                                                                          InterbotiX Labs Item #: HEX-PACK -

                                                                                                                                                            The Hex Key Variety Pack includes 5 essential hex keys for your assembling needs. These drivers won't strip before your bolts do! The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong hex key that will last a long time!This variety pack includes the following:1.5mm Hex Key2.0mm Hex Key2.5mm Hex Key3.0mm Hex Key4.0mm Hex Key

                                                                                                                                                            Panel Mount Squid Power Cable panel mount squid, power cable panel mount, power squid cable, panel power, dc power panel mount, dc power squid
                                                                                                                                                            Price: $4.95
                                                                                                                                                            Availability: In Stock
                                                                                                                                                            Goodwell Electrical Item #: CBL-PSQUID -

                                                                                                                                                              The Panel Mount Squid Power Cable is great for adding an external jack to any Arduino enclosure like the Project Box for Arduino. This cable offers the ability to power two things at once coming from a female DC jack (2.1*5.5mm) into two pairs of positive and negative squid cables. A great solution to power your Arduino leaving you with the ability to power motors, relays and more!

                                                                                                                                                              Phillips 0 Screwdriver phillips 0 screwdriver, phillips driver, phillips screwdriver, phillips 0, 0 driver, 0 screwdriver, phillips
                                                                                                                                                              Price: $3.95
                                                                                                                                                              Availability: In Stock
                                                                                                                                                              InterbotiX Labs Item #: DRV-PH0 -

                                                                                                                                                                These Phillips 0 drivers have a nice grip and turning cap on the rear end to help you move quick. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong driver that will lost a long time.

                                                                                                                                                                Phillips 00 Screwdriver phillips driver, phillips 00 screwdriver, phillips, phillips screwdriver, phillips 00 driver
                                                                                                                                                                Price: $3.95
                                                                                                                                                                Availability: In Stock
                                                                                                                                                                InterbotiX Labs Item #: DRV-PH00 -

                                                                                                                                                                  These Phillips 00 drivers have a nice grip and turning cap on the rear end to help you move quick. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong driver that will lost a long time.

                                                                                                                                                                  Power Converter 6 in 1 Pack Barrel Jack, screw terminal, 2.1mm jack, BNC, JST 2 pin, female barrel jack, barrel jack to JST, BNC screw terminal
                                                                                                                                                                  Price: $5.99
                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                  Seeed Studio Item #: SS-CNE112D1P -

                                                                                                                                                                    You don't need to go all the way to Tosche Station to pick up these Power Converters! This versatile little pack of power converters is great for all sorts of projects.The two JST ended cables (2mm pin spacing) and compatible with the Seeeduino line so they're great for connecting your Seeeduino up to your existing projects and power supplies. The screw terminals on the other four power jacks make these converters great prototyping tools. Contents 1X 2.1/5.5mm Barrel jack(female) to JST 2pin...

                                                                                                                                                                    PowerSwitch Tail II PowerSwitch Tail, 120V relay, wall plug relay, power, switch, tail,2, ii, ac
                                                                                                                                                                    Price: $28.95
                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                    SparkFun Item #: SF-COM-10747 -

                                                                                                                                                                      Want to control a standard wall outlet device with your micro controller, but don't want to mess with the high voltage wiring? This might just be the right device for you! The PowerSwitch Tail is designed to allow you to safely control an outlet device without exposing any 120VAC voltages. You can plug in any standard 120VAC 3-prong outlet to be controlled by most any microcontroller. This will work great with Arduino! The PowerSwitch Tail II improves on the original PowerSwitch Tail by...

                                                                                                                                                                      Robot DC Gearhead Motor - 6v 180rpm w/ Encoder Robot Motor, DC Gearhead Motor, Motor Encoder, Gearhead Motor Encoder, Gearhead Motor, Robot Gearhead Motor, Robot Gearhead Motor Encoder
                                                                                                                                                                      Price: $19.95
                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                      InterbotiX Labs Item #: KIT-MTR-36-06-180 -

                                                                                                                                                                        We searched high and low to find an affordable yet high quality DC motor for robotics, and a solid start to our Robot Motors section. After a lot of trial and error, testing dozens of motors, we have found what we believe to be a solid choice for small-medium sized robots weighing 2-5 lbs. The RPM make them an ideal choice for 3-4" wheels, and with an integrated encoder you can calculate odometry data to make your robots navigate the real world. This motor includes a 6-pin 2.0mm pitch PH JST...

                                                                                                                                                                        RobotGeek Webcam with 250mm Gooseneck robot vga webcam with gooseneck, gooseneck, gooseneck mount, robot webcam and mount, 200mm gooseneck, robot camera, flexible hose mount
                                                                                                                                                                        Price: $39.95
                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                        InterbotiX Labs Item #: KIT-GOOSECMRA -

                                                                                                                                                                          Extend your robot's vision even further with the Robot VGA Webcam with 200mm Gooseneck! This kit includes all the contents of the 200mm Gooseneck with the Robot VGA Webcam with Mounts. This gooseneck/camera pair is a great additionn to Robotic Arms like our PhantomX Reactor. This tiny webcam will geneate a 640x480px video at 30fps, making it great for basic computer vision. The included mounting hardware make attaching the gooseneck to your robot a snap. ...

                                                                                                                                                                          Screwdriver Variety Pack hex drivers, 1.5mm hex driver, 2.0mm hex driver, 2.5mm hex driver, phillips 0 driver, phillips 00 driver, driver variety pack
                                                                                                                                                                          Price: $17.95
                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                          InterbotiX Labs Item #: DRV-PACK -

                                                                                                                                                                            These drivers have a nice grip and turning cap on the rear end to help you move quick. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong driver that will lost a long time.Included with this variety pack is the following:1.5mm Hex Screwdriver2.0mm Hex Screwdriver2.5mm Hex ScrewdriverPhillips 0 ScrewdriverPhillips 00 Screwdriver ...

                                                                                                                                                                            Turbo-Lock Blue Thread 10ml
                                                                                                                                                                            Price: $9.95
                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                            Item #: 11-010 -

                                                                                                                                                                              Turbo Lock Anaerobic Thread Locker (Blue) (Medium Strength, Removable) Robots tend to jiggle and vibrate a lot. When they do this long enough their nuts and bolts shed like an Alabama dog in the spring. It is highly recommended to use a thread locker to prevent this from happening. Turbo Lock does a great job keeping your robots together. See our pro tip below about how to easily use it during assembly. This is a 10ml bottle, roughly twice the amount of your standard bottle of thread locker....

                                                                                                                                                                              Phidgets Voltage Divider Phidgets Voltage Divider, Phidget Voltage Divider
                                                                                                                                                                              Price: $7.00
                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                              Phidgets Inc Item #: PH-1121 -

                                                                                                                                                                                The Voltage Divider eliminates the need to connect a resistor to an analog input by putting a high precision potentiometer on the board to allow the adjustment of the 'fixed' resistor. The interface to the variable resistance sensor is a convenient terminal block. Perfect for force sensing resistors (FSR's), thermisters, photoresistors, and any other variable resistance sensors. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building...