Item #: KIT-MTR-WHL -
Get your rover rolling with our new custom Robot DC Gearhead Motor & Wheel Starter Kit. Each kit comes with 2 motors and wheel sets as well as a pair of brackets to mount your motors to your robot. Each wheel is 90mm in diameter (including the rubber tire). The motors in this kit use Hall Effect Quadrature sensors to achieve an encoder output of 520 ticks/revolution, allowing you to control the motors very precisely. Each motor includes a 6-pin cable that breaks out motor inputs and the...
Item #: PO-1084 -
These light-weight brackets (under 15 g each) are specifically designed for the Pololu 37D mm metal gearmotors, such as the 19:1 metal gearmotor 37Dx52L mm and the 19:1 metal gearmotor 37Dx52L mm with 64 CPR encoder. Each bracket features seven mounting holes for M3 or #4-size screws along each edge, giving you a variety of mounting options. A total of twelve M3 screws (six for each bracket) are included for securing the motor to the bracket. NOTE: This set contains 2 brackets and DOES NOT...
Item #: ASM-GM-WHL-SET -
This kit is a combination of two RG 90 Gear Motors and two matching Gear Motor Wheels.The variety of mounting holes on the gear motors will make them easy to mount to almost any chassis. With a weight of 18g, this set is a great choice for small robots and rovers. RG90 Gear Motor Operating Voltage 6V No Load Speed 90 RPM No Load Current 150 mA Stall Current 800 mA Output Torque 1.2 kg/cm Gear Ratio 1:120 Overall Dimensions 54x42x23mm Weight 35 grams Technical Drawing ...
Item #: MP-EPF200 -
The Mini Turbo Fan is a Mini Badass. Sporting 73g of thrust while weighing in at only 30g it can take off if you give it full throttle. Perfect for fire fighting robots or cooling you on hot summer days. The Mini Turbo Fan comes with a heat sink and 4" cable with male ends. To extend the cable we recommend using our 2-pin F/F jumper cable. *The fan edges may rub against the duct walls when you first run it. This is okay. The blades will actually trim themselves down. That is how badass this...
Item #: KIT-MTR-36-06-180 -
We searched high and low to find an affordable yet high quality DC motor for robotics, and a solid start to our Robot Motors section. After a lot of trial and error, testing dozens of motors, we have found what we believe to be a solid choice for small-medium sized robots weighing 2-5 lbs. The RPM make them an ideal choice for 3-4" wheels, and with an integrated encoder you can calculate odometry data to make your robots navigate the real world. This motor includes a 6-pin 2.0mm pitch PH JST...