Trossen Robotics will be on Holiday Vacation November 26-29. Orders placed after 2:30pm CST on November 25th will be processed on November 30th.
Was: $219.90
Sale: $197.91
You Save: $21.99 (10.0%)
  • Black Friday / Cyber Monday Sale - All Items 10%


The MX-28T Dynamixel Robot Servo Actuator is the newest generation of Robotis Dynamixel actuator; equipped with an onboard 32bit 72mhz Cortex M3, a contact-less magnetic encoder with 4x the resolution over the AX/RX series, and up to 3mpbs using the new TTL 2.0 bus. Each servo has the ability to track its speed, temperature, shaft position, voltage, and load. As if this weren't enough, the newly implemented PID control algorithm used to maintain shaft position can be adjusted individually for each servo, allowing you to control the speed and strength of the motor's response. All MX Series servos use 12v nominal voltage, so AX & MX Dynamixels can be mixed without having to worry about separate power supplies. All of the sensor management and position control is handled by the servo's built-in microcontroller. This distributed approach leaves your main controller free to perform other functions.

Every DYNAMIXEL servo is compatible with wide variety of horns, idlers and frames to help you easily build your robotic project. This hardware connects directly to your DYNAMIXEL servo, allowing you to mount it to your project or to other DYNAMIXEL servos. Some robots can be built almost completely from DYNAMIXEL servos and frames. You can see a full list of frames that are compatible with this servo on our DYNAMIXEL Compatibility Chart

If you want to control this DYNAMIXEL servo from an Arduino Compatible microcontroller, check out the ArbotiX-M Robocontroller. The ArbotiX-M Robocontroller was designed to take all the guesswork out of controlling DYNAMIXEL servos from the Arduino Envinroment. We have Arduino libraries for the DYNAMIXEL servos and and 3-pin TTL DYNAMIXEL servo will plug directly into the ArbotiX-M. For tips on getting everything you need to get your ArbotiX/DYNAMIXEL project off the ground, see out our ArbotiX-M/DYNAMIXEL Buying Guide.

3-Pin TTL DYNAMIXEL Compatible Controllers

MX-28 Family Servos

MX-28T - 3 Pin TTL Servo MX-28R - 4-pin RS-485 Servo MX-28AT - 3 Pin TTL Servo with Aluminum Front Plate MX-28AR - 4 Pin RS-485 Servo with Aluminum Front Plate
Single MX-28T - $219.90 Single MX-28R - $225.90 Single MX-28AT - $239.90 Single MX-28AR - $249.90
Bulk Pack (6 Servos) - $1099.50 / $183.25 per servo N/A Bulk Pack (6 Servos) - $1199.50 / $199.92 per servo Bulk Pack (6 Servos) - $1249.50 / $208.25 per servo

MX-28 Stats
Operating Voltage 14.8V 12V 11.1V
Stall Torque* 31.6 kg·cm
439 oz·in
3.1 N.m
25.5 kg·cm
354 oz·in
2.5 N.m
23.4 kg·cm
325 oz·in
2.3 N.m
No-load Speed 67 RPM 55 RPM 50 RPM
Weight 72g
Size 35.6 x 50.6 x 35.5 mm
Resolution 0.088°
Reduction Ratio 193 : 1
Operating Angle 0° ~ 360° or Continuous Turn
Max Current 1.4A @ 12V
Standby Current 100 mA
Operating Temp -5°C ~ 80°+C
Protocol TTL Asynchronous Serial
Module Limit 254 valid addresses
Com Speed 8000bps ~ 3Mbps
Position Feedback Yes
Temp Feedback Yes
Load Voltage Feedback Yes
Input Voltage Feedback Yes
Compliance/PID Yes
Material Metal Gears &
Engineering Plastic Body
Motor Maxon RE-MAX
Manual Download MX-28 manual
Controller List ArbotiX

*Stall torque is the maximum instantaneous and static torque. ROBOTIS recommends that your robot or project uses 1/5 or less of the stall torque to create stable motions.

Loading the player...