Item #: SS-ROB12745M -
Bigger isn't always better - and the EMAX 9g ES08A High Sensitivity Mini Servo will prove it! The small form factor and low weight of this servo makes it perfect for a vast range of smaller scale projects. Set Contains 4 Servo Horns 3 Screws Specifications Operating voltage: 4.2-6V Operating speed: 0.10sec/60degree(4.8v) Stall torque: 1.8kg/cm Temperature range: 0°-55° Dimensions : 32x11.5x24mm Weight:9g Temperature range: 0°-55° ...
Item #: RAW-JOYSTICK -
This Self Centering Joystick W/5k Pots would be a sturdy addition to any control pad. Like most joysticks, this one uses 2 potentiometers to measure the current angles of the joystick, but this one also has fine adjustment levers for both potentiometers. Each potentiometer comes pre-wired without headers. 2.20" x 2.20" x 1.17"
Item #: KIT-M-300-B-OF-106HXW -
This is a legacy product compatible with older EX-106+ servos. For newer MX-106 servos see the new Custom X-Wide Bracket Set A double wide hinge bracket for creating 2 axis EX-106+ joints. Strength & Speed Chart of the Dynamixel Family ...
Item #: LM-ASB-201B -
High quality aluminum multi-purpose mega-scale servo bracket. Works great for making multi-axis joints for use in robot arms and legs. Sold in a 2-pack. Fits HS-755HB, HS-755MG, and HS-5745MG servos. Requires HMSH-02 Aluminum Servo Horn.
Item #: LM-MMT-01 -
High quality black anodized brushed aluminum. Heavy duty .0625" stock. Works with Lynxmotion motors "GHM-05" thru "GHM-08."
Item #: LM-ASB-10B -
High quality brushed aluminum "C" bracket with ball bearings works great with our Multi-Purpose Servo Bracket or Heavy Duty Servo Hinge sold separately. Useful for making your own arms and legs with ball bearings. Sold in a 2-pack. Fits standard size servos.
Item #: RO-903-0005-000 -
Frame Bracket for the DX-117 Dynamixel. Example of DX-117 & OF-116S
Item #: M-300-B-OF-RX28B -
Frame OF-RX28B provides a mounting pattern on the rear side of the RX-28 Dynamixel. Example of RX-28 bracket system. Product Pictures Projects Using the RX-28 & RX-24 Dynamixel Servos & Brackets --> --> ...
Item #: M-300-B-OF-28FL -
Frame OF-28FL provides a mounting point for a bearing hub. Projects Using the RX-28 & RX-24 Dynamixel Servos & Brackets --> --> ...
Item #: RO-903-0032-000 -
RX-28 HN07-N1 Servo Horn is a servo horn set for the RX-24F & RX-28 Dynamixels. This is the legacy mounting pattern which is included with all N1 series Dynamixels. It uses a 17mm diameter mounting hole pattern. Nut & Bolt Hardware Included. RX-24F/28 Servo Documentation: RX-24F Manual RX-28 Manual Dynamixel SDK Documentation RX-24F/28 Technical Drawings & 3D Models: RX-24F/28 Dimensional Drawing (PDF) RX-24F/28 Dynamixel 3D Models (STP) HN07 Series Servo Horn Drawings (DWG)...
Item #: RO-903-0010-000 -
Side Frame Bracket for the RX-64 Dynamixel. Example of RX-64 & OF-64S2 Projects Using the RX-64 Dynamixel Servos & Brackets --> Strength & Speed Chart of the Dynamixel Family --> ...
Item #: M-300-B-OF-106HD -
Frame OF-106HD is a double wide straight hinge frame for building joints. This frame is JOINT only - it does not include the idler shown above.
Item #: PX-900-00008 -
The Parallax Continuous Rotation Servo is a Futaba S148 servo. It's recommended for robotics projects and includes an adjustable potentiometer to center the servo. Servos may be controlled directly from a BASIC Stamp I/O pin by using the PULSOUT command. Servo has been modified for continuous rotation. NOTES:This continuous rotation servo only work with the following brackets: E-Z Aluminum Servo Bracket , Multi-Purpose Servo Bracket, & Aluminum Servo Bracket (may need some custom...
Item #: M-300-B-OF-28H45-BO -
This is a legacy frame that is compatible with the old style 'N1' horn The frame is compatible with N1 RX-24/RX28. It is not compatible with the new 'N101' horn.
Item #: PH-11341 -
The 1134 - Switchable Voltage Divider is a voltage divider with switches. The switches can be used to control which resistors are used in the voltage divider. The resistance values (in Ohms) are 249, 820, 2.61K, 8.45K, 27.4K, 91K, 300K and 1M. It is possible to have multiple switches flipped, putting the corresponding resistors in parallel. The 1134 Provides an interface to non-Phidgets variable resistance sensors such as: Force Sensing Resistors (FSR), light sensors, thermistors (heat...