Servos

Show
EMAX Mini Servo back view
SS-ROB12745M
Price: $9.90 In Stock
Item #: SS-ROB12745M -

    Bigger isn't always better - and the EMAX 9g ES08A High Sensitivity Mini Servo will prove it! The small form factor and low weight of this servo makes it perfect for a vast range of smaller scale projects. Set Contains 4 Servo Horns 3 Screws Specifications Operating voltage: 4.2-6V Operating speed: 0.10sec/60degree(4.8v) Stall torque: 1.8kg/cm Temperature range: 0°-55° Dimensions : 32x11.5x24mm Weight:9g Temperature range: 0°-55° ...

    9g Servo Bracket
    SS-ROB71155P
    Price: $9.90 Back Order
    Item #: SS-ROB71155P -

      Do you need some mounting hardware for your mini servo? Then 9g Servo Bracket Set is for you. This yoke and bracket kit is ideal for use with mini-servos, and works perfectly with the EMAX 9g ES08A Mini Servo NOTE: This set does NOT include any servos. Set Includes : 2 - Brackets 1 - Yoke 4 - Plastic Rivets (3x5.5) 8 - Plastic Rivets (2x5.6) 2 - Paper Washers 8 - Screws ...

      RobotGeek 180 Degree Robot Servo robot servo, 180 degree robot servo, robotgeek servo, robotgeek robot servo, robotgeek 180 degree servo, 180 degree servo
      ASM-RGS-13
      Retail: $24.95
      Price: $19.95 In Stock
      Item #: ASM-RGS-13 -

        Get ready to bring your robotic dreams to life with the RobotGeek 180 Degree Robot Servo! This metal-geared servo is perfect for building robotic joints and will help you create your own custom robotic arms, crawlers, and more! And because these servos use a standard PWM signal for control, they're easy to directly interface with microcontrollers like the Arduino! Idler Horn The difference between a regular servo and robot servo is the Idle Horn. This horn will spin freely and is at the...

        RobotGeek Continuous Rotation Servo robotgeek 360 degree robot servo, robotgeek continuous servo, robotgeek robot servo, robot servo, robotgeek servo, continuous robot servo, continuous servo,Continuous Rotation
        ASM-RGS-4C
        Retail: $24.95
        Price: $19.95 In Stock
        Item #: ASM-RGS-4C -

          Get ready to bring your robotic dreams to life with the RobotGeek Continuous Rotation Servo! This metal-geared servo is perfect for building robotic rovers, spinners and more! And because these servos use a standard PWM signal for control, they're easy to directly interface with microcontrollers like the Arduino! Idler Horn The difference between a regular servo and robot servo is the Idle Horn. This horn will spin freely and is at the opposite position of the main drive horn. The idler horn...

          Little Grip Attachment Kit
          LM-LGA-KT
          Price: $3.00 Back Order
          Item #: LM-LGA-KT -

            Lexan mounting plate and hardware. Mounts a Little Grip kit to an aluminum servo "C" bracket.

            FS90 Analog Micro Plastic Gear Servo FS90 Analog Micro Plastic Gear Servo, analog micro servo, plastic gear servo, 9g plastic servo, 9g servo, micro servo, analog servo, 9g micro servo
            FT-FS90
            Price: $6.95 In Stock
            Item #: FT-FS90 -

              Need a tiny servo for a tiny task? Try the FS90 Micro Plastic Gear Servo! This servo is great for scanning type sensors, tiny robots, and more! Each servo comes with a variety of horns. These servos use a standard PWM signal to control them. The Arduino does a great job of controlling PWM Servos, making it ideal for a variety of robotic projects. But sometimes powering these servos can be problematic. Powering servos from the Arduino's 5v regulator leads to underpowered servos, limited by both...

              FS90MG Micro Metal Gear Servo Fitec FS90MG Micro Metal Gear Servo, metal gear servo, 9g servo, 9g metal gear servo, 9g micro metal gear servo, 9g metal servo, metal gear servo, micro servo
              FT-FS90MG
              Price: $9.95 In Stock
              Item #: FT-FS90MG -

                Need a tiny servo for a tiny task? Try the FS90 Micro Plastic Gear Servo! This servo is great for scanning type sensors, tiny robots, and more! Each servo comes with a variety of horns. The metal gears give this servo even more power and durability! These servos use a standard PWM signal to control them. The Arduino does a great job of controlling PWM Servos, making it ideal for a variety of robotic projects. But sometimes powering these servos can be problematic. Powering servos from the...

                Parallax (Futaba) Continuous Rotation Servo servo, servos, continuous rotation servo, continuous servo
                PX-900-00008
                Price: $10.00 In Stock
                Item #: PX-900-00008 -

                  The Parallax Continuous Rotation Servo is a Futaba S148 servo. It's recommended for robotics projects and includes an adjustable potentiometer to center the servo. Servos may be controlled directly from a BASIC Stamp I/O pin by using the PULSOUT command. Servo has been modified for continuous rotation. NOTES:This continuous rotation servo only work with the following brackets: E-Z Aluminum Servo Bracket , Multi-Purpose Servo Bracket, & Aluminum Servo Bracket (may need some custom...

                  RobotGeek Servo C Bracket robotgeek servo c bracket, c bracket, robotgeek bracket, robotgeek servo bracket, servo bracket, servo c bracket
                  RG-CBRACKET
                  Price: $4.95 In Stock
                  Item #: RG-CBRACKET -

                    The RobotGeek Servo C Bracket is a great tool for creating joints with your RobotGeek Servo. This bracket easily attaches to the servo's horns with just a few bolts. A variety of mounting holes on the bracket make it easy to mount the bracket to your robot or sensors in a variety of ways. The circular hole pattern on the bottom of the bracket will also attach directly to a RobotGeek Servo Horn or other brackets, allowing you to easily build up complex servo systems. Do you need hardware?...

                    RobotGeek Servo Side Bracket robotgeek servo side bracket, servo side bracket, side bracket, rg side bracket, side bracket
                    HW-SBRACKET
                    Price: $4.95 In Stock
                    Item #: HW-SBRACKET -

                      The RobotGeek Servo Side Bracket is the perfect way to mount your RobotGeek Servo to other servos and your Robot. The side bracket can attach to 5 different positions on the servo rail to make it easy to configure your robot the way you want it. The circular hole pattern on the bottom of the bracket will also attach directly to a RobotGeek Servo Horn or other brackets, allowing you to easily build up complex servo systems. Do you need hardware? RobotGeek Servos come with metric nuts and bolts,...

                      Aluminum C Servo Bracket with Ball Bearings Two Pack
                      LM-M-300-ASB-09
                      Price: $10.00 In Stock
                      Item #: LM-M-300-ASB-09 -

                        High quality black aluminum "C" bracket works great with our Multi-Purpose Servo Bracket or Heavy Duty Servo Hinge sold separately. Useful for making your own arms and legs. Sold in a 2-pack. Fits standard size servos.