Products 25-48 of 97
Show
Rainbowduino LED Driver Platform Rainbowduino LED Driver Platform (Atmega 328)
Price: $24.95
View
Availability: Back Order
Item #: SS-ARD127D2P -

    The Rainbowduino board is an Arduino compatible controller board for driving LEDs. It will drive an 8x8 RGB Led Matrix (Common Anode). Work Modes The Rainbowduino can run in different work modes depending on your needs. Standalone Mode (plug and shine) UART Mode (Send data from your computer to one Rainbowduino.) I2C Mode (Send data from your computer to multiple Rainbowduino’s.) I2C Cascading (PC or Arduino generated frames displayed on multiple Led Matrices.) Features Pairs with 8x8 RGB Led...

    60mm Square 8x8 RGB Matrix 60mm Square 8x8 RGB Matrix
    Price: $23.50
    View
    Availability: In Stock
    Item #: SS-LED204A5B -

      This LED Matrix is ment to be paired with the Rainbowduino LED Driver for making cool light displays. Start your own rave in your garage or make a scrolling banner for outside your room to keep pests away. Features 60mm x 60mm 64 (8x8) Super Bright RGB LEDs (Common Anode) Pairs with the Rainbowduino LED Driver Product Datasheet. Product DOCUMENTATION / WIKI Page. ...

      2.8" TFT Touch Shield 2.8" TFT Touch Shield, Arduino Touch screen, Touch shield, Touchscreen shield, Arduino Touchscreen LCD, Touchscreen LCD
      Price: $49.95
      View
      Availability: In Stock
      Item #: SS-SLD62445P -

        2.8'' TFT Touch Shield is an Arduino / Arduino Mega compatible multicolored TFT display with a 4-wire resistive touch-screen. It is available in an Arduino shield compatible pinout for attachment. The TFT driver is based on ST7781R with 8bit data and 4bit control interface.  Arduino / Mega Shield compatible footprint. TFT Resolution : 240 x 320 pixels Size : 2.8" (50.0 x 69.2 x 2.5 mm) Colors : 262K Backlight : LED Driver IC: ST7781R 4-Wire Resistive Touch Screen Application Ideas As a...

        Grove - OLED Display 128x64 Grove OLED Display 128x64, arduino OLED, OLED display, arduino LED, arduino display
        Price: $19.95
        View
        Availability: In Stock
        Item #: SS-OLE35046P -

          LED 128×64 Display module is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It has bigger screen and uses all the columns from the SSD1308 chip so that it can display more contents than the OLED 96×16. Features Grove compatible Small size I2C Interface Low power consumption...

          Grove - Vibrator Grove Vibrator, Arduino vibrator, vibration output, electric vibrator
          Price: $4.95
          View
          Availability: In Stock
          Item #: SS-ROB51043P -

            This is a tiny little DC motor that goes BZZZZZZZZZZZZZZZZZZZ. That's the sound that vibration makes. Sound it out phonetically if you don't believe me. It vibrates when the when you send it a digital HIGH signal and doesn't when you don't. Fairly simple operation. Use it for haptic feedback in your immersive VR toaster operator or space shuttle flight simulator. Also great for creating annoyance devices to hide in a co-workers office to buzz at random. Documents: Please visit our wiki page...

            Grove - Moisture Sensor Grove Moisture Sensor, Arduino Moisture sensor, moisture sensor
            Price: $5.95
            View
            Availability: In Stock
            Item #: SS-SEN92355P -

              The Grove Moisture Sensor can be used to detect the moisture of soil and/or measure soil humidity. Actually I just made that up, I have no idea if 'soil humidity' is a thing, but this sensor can measure it! So, practical applications? Well you could use this to determine when your plants are thirsty. Perhaps create an automated plant watering system? Throw in some light sensors and a temperature/humidity module and you've got yourself a pretty high-tech greenhouse. Features Easy to Use...

              Grove - Infrared Emitter Grove IR Emitter, IR transmitter, IR LED, Grove Infrared Emitter, Infrared Emitter, Arduino IR Emitter, Arduino Infrared Emitter
              Price: $4.95
              View
              Availability: In Stock
              Item #: SS-WLS12148P -

                Infrared is a quick, cheap, and easy method to transmit data. With the Grove Infrared Transmitter you too can control legions of robotic minions - or just your TV. This emitter is designed to work in tandem with the Grove Infrared Receiver so that you can quickly build your own infrared data system. The Grove Infrared Transmitter is a great tool to cheaply integrate remote control/communication to any of your projects. Technical Specifications 10 meter detection range Grove compatible 20mm X...

                Grove - Infrared Receiver Grove IR Receiver, IR Receiver, IR LED, Grove Infrared Receiver, Infrared Receiver, Arduino IR Receiver, Arduino Infrared Receiver
                Price: $4.95
                View
                Availability: In Stock
                Item #: SS-WLS12136P -

                  Do you really know what your TV remote is saying to your TV when you hit the ‘Power’ button? Well now you can! The Grove Infrared Receiver has a 4 pin Grove-compatible breakout header, so it will connect to your Grove based project in a snap. You'll be decoding IR message in no time! You can used this receiver with an existing IR transmitter like a TV remote or you can get your hands on a Grove Infrared Emitter to build your own infrared data system. The Grove Infrared Receiver is a great tool...

                  Screw Shield
                  Price: $7.50
                  View
                  Availability: In Stock
                  Item #: SS-ACC08101P -

                    Screw shield is a wing-like shield that extends both sides of your Arduino or Arduino variants into sturdy and reliable screw terminal blocks. On the digital pins side, it contains 18 terminals: 16 normal terminals and 2 extra GND.  As to the Analog pins side, there are 16 terminals (12 normal terminals, 4 extra terminals for Vin, 2*GND and 5V) and 2 breakout through holes for 2 additional ADC pins. Sweetly, a special extension block for SPI interface is included in this product to...

                    Grove 4 Digit Display
                    Price: $7.20
                    View
                    Availability: In Stock
                    Item #: SS-LED05291P -

                      Whether you're making a new homebrew digital watch or you need a countdown timer for your old doomsday project, the Grove - 4 Digit Display is the perfect module for you! Normally, to get a 4 digit display, you would have to sacrifice at least 12 precious I/O pins from your Arduino, but with this module, you'll only need 2 pins! The module has an onboard TM1637 chip that handles all of the heavy lifting, freeing up resources for your project. Just hook the display up to one of the ports on...

                      Grove Slider Potentiometer
                      Price: $6.50
                      View
                      Availability: In Stock
                      Item #: SS-COM05231P -

                        Rotary potentiometers are a great way to control all sorts of devices through your Arduino - but sometimes they're a bit boring. Bring some pizazz back to your controller with the Grove - Slide Potentiometer! This Grove compatible sensor will plug directly into your Grove Sensor Shield and you'll be ready to go! You can read the data from the slider, just as you would any other potentiometer. It even has an onboard LED that you can control from your Arduino! Technical Specifications 30mm slide...

                        Grove Alcohol Sensor Grove Alcohol Sensor
                        Price: $9.95
                        View
                        Availability: In Stock
                        Item #: SS-SEN21723P -

                          Have you lost your beer? Do you need help finding it? You need an alcohol sensor. Features Power requirements: 5 VDC @ ~120 mA (heater on) Detection Gas: Alcohol Concentration: 20-1000ppm Alcohol Interface: 1 TTL compatible input (SEL), 1 TTL compatible output (DAT) Dimension: 40×20×12mm Heater Voltage: 0.9V ± 0.1V AC or DC Heater Current: 120±20mA Preheat time: Over 48 hours Product DOCUMENTATION / WIKI Page. *NOTE - Obviously, this is not a legal alcohol breathalyzer device. Don't be an...

                          Grove - Real Time Clock (RTC) Grove, Grove, Grove RTC, Grove RTC, Real Time Clock Module, arduino real time clock
                          Price: $7.95
                          View
                          Availability: In Stock
                          Item #: SS-SEN12671P -

                            Description The RTC module is a member of Grove. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hours, day, date,month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator.  Note: Battery is not included. Features...

                            Grove - Water Sensor Grove Water Sensor, Arduino Water sensor, water sensor
                            Price: $4.95
                            View
                            Availability: In Stock
                            Item #: SS-SEN11304P -

                              Description This water sensor module is part of the Grove system. This sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sens traces. The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace. believe it or not this circuit will work with the digital I/O pins of your Arduino or you can use it with the analog...

                              Grove - Touch Sensor Grove Touch Sensor, Arduino touch sensor, touch sensor, grove touch sensor
                              Price: $4.95
                              View
                              Availability: In Stock
                              Item #: SS-SEN11303P -

                                Description This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223-B touch detector IC It measures the capacitance of a metallic pad. It can detect the change in capacitance when a finger is near it. This is the same technology used in the iPhone touch screen. So you can place the metallic pad under a non-metallic surface such as a plastic or glass sheet and it will still work as a button. This may be useful for projects that need to be...

                                Grove - Protoshield Module Grove Protoshield, Grove Prototyping, arduino protoshield, sensor prototyping board
                                Price: $4.95
                                View
                                Availability: In Stock
                                Item #: SS-PRO23049P -

                                  Description This Grove allows you to add your own circuitry or components to your Grove system prototypes. This allows you access to all four lines from the connector cable S0, S1, VCC and GND. There is also an extra normally-open button to take advantage of. The hole spacing makes using normal DIP-format ICs and other components very simple. You may wish to purchase more for future use in advance. ...

                                  Grove - Rotary Angle Sensor Grove Rotary Angle Sensor, Rotary Angle Sensor, arduino potentiometer, turn knob
                                  Price: $4.95
                                  View
                                  Availability: In Stock
                                  Item #: SS-COM22735P -

                                    Description The potentiometer Grove produces analog output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The D2 connector is not used. The angular range is 300 degrees with a linear change in value. The resistance value is 10k ohms, perfect for Arduino use. This may also be known as a rotary angle sensor. Document How to use ...

                                    Grove - Light Sensor Grove Light Sensor, arduino light sensor, freeduino light sensor, seeeduino light sensor
                                    Price: $4.95
                                    View
                                    Availability: In Stock
                                    Item #: SS-SEN11302P -

                                      Description The Light sensor module uses the GL5528 photoresistor to detect the light intensity of the environment. The resistance of the sensor decreases when the light intensity of the environment increases. The chip LM358 is used as a voltage follower to enable you get a accurate data. Features Grove compatible interface Wide supply voltage range: 3V-30V 2.0cm x 2.0cm Grove module? Minimum external parts Applications Ideas Electronic toys Light-control switch Monitor Documents Please visit...

                                      Grove - Electricity Sensor Grove Electricity Sensor, arduino electricity sensor, electrical sensor, electricity detection sensor
                                      Price: $7.95
                                      View
                                      Availability: In Stock
                                      Item #: SS-SEN23931P -

                                        Description The Electricity sensor module is a member of Grove. It is based on the TA12-200 current transformer which can change large alternating current into a small amplitude. You can use it to test large alternating current upto 5A. Features Grove compatible interface Maximum 5A input High accuracy Small size Applications Alternating current measurment Device condition monitoring Document Datasheet ...

                                        Grove - 3-Axis Compass Grove 3-Axis Compass, arduino compass, compass sensor, 3-axis compass, arduino compass sensor
                                        Price: $25.00
                                        View
                                        Availability: In Stock
                                        Item #: SS-SEN12753P -

                                          Description 3-Axis Compass module, a member of Grove family uses I²C based Honeywell HMC5883L digital compass. This ASIC is equipped with high resolution HMC118X magneto-resistive sensors and a 12-bit ADC. It provides compass heading accuracy up to 1° to 2°. Signal conditioning like amplification, automatic degaussing strap drivers and offset cancellation are inbuilt. This Grove module also includes a MIC5205-3.3 for power supply requirement. Hence user can connect any 3.3V to 6V DC power...

                                          Grove - 3-Axis Accelerometer Grove 3-Axis Accelerometer, 3-axis accelerometer, arduino accelerometer, Grove accelerometer, accelerometer sensor
                                          Price: $16.95
                                          View
                                          Availability: In Stock
                                          Item #: SS-SEN21853P -

                                            Description This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C. This Grove can be used for sensing data changes, product orientation, and gesture detection through an interrupt pin (INT).It is a very low power, low profile capacitive MEMS sensor Grove. What is new Mounting edge for you to solder I2C Groves together, and free you from wiring. Flat bottom. 5VDC input Features Grove compatible interface 3 axis motion/orientation sensing Digital Output (I2C) 10,000 g...

                                            Grove - 3-Axis Gyro Grove 3-Axis Gyro 3-axis gyro, arduino gyro, Grove gyro, gyro sensor, gyroscope sensor, arduino gyroscope, Grove gyroscope
                                            Price: $39.95
                                            View
                                            Availability: In Stock
                                            Item #: SS-SEN11763P -

                                              Description Grove - 3-axis Gyro module based on ITG 3200. It is the world’s first single-chip, digital-output, 3-axis MEMS motion processing gyro optimized for gaming, 3D mice, and motion-based remote control applications for Internet connected Digital TVs and Set Top Boxes. The ITG-3200 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyro outputs, a user-selectable internal low-pass filter bandwidth, and a Fast-Mode I2C (400kHz) interface.  Grove - 3-axis Gyro is...

                                              Grove - Magnetic Switch Sensor Grove Magnetic Switch, Grove Magnet, Magnetism Switch, Magnet switch, arduino magnet switch, magnetism sensor, arduino magnetic sensor
                                              Price: $4.95
                                              View
                                              Availability: In Stock
                                              Item #: SS-COM11335P -

                                                Description This is a Grove interface compatible Magnetic switch module. It is based on encapsulated dry reed switch CT10. CT10 is single-pole, single throw (SPST) type, having normally open ruthenium contacts. The sensor is a double-ended type and may be actuated with an electromagnet, a permanent magnet or a combination of both. The magnetic switch is a wonder tool for designers who would like to turn a circuit on and off based on proximity. Features Grove compatible interface 2.0cm x 2.0cm...

                                                Grove - Buzzer Grove Buzzer, Arduino buzzer, buzzer, arduino sound
                                                Price: $4.95
                                                View
                                                Availability: In Stock
                                                Item #: SS-COM22458P -

                                                  Description This is a simple yet enjoyable Grove to use. The piezo can be connected to digital outputs, and will emit a tone when the output is high. Alternatively it can be connected to an analog pulse-width modulation output to generate various tones and effects. Documents Please visit our wiki page for more info about this product. ...