Products 1-24 of 55
Product Features Sends and Receives Consumer IR codes Control your computer or any Phidgets with an old remote control Control your TV, DVD, etc. with your computer Connects directly to a computer's USB Port Product Description You can use the PhidgetIR to control devices with remote control input - such as your TV or DVD player, from your computer by having the PhidgetIR transmit remote control codes. Your application can learn the signals from arbitrary remote controls. The learned code can...
Product Description The 1049 - PhidgetSpatial 0/0/3, a 3 axis Accelerometer, measures static and dynamic acceleration in 3 axes, up to 5g, and provides a high sampling speed of up to 1000 samples per second. Each accelerometer axis is calibrated at the factory for cross-axis misalignment, sensitivity to positive and negative acceleration, and offset. Product Specifications Characteristic Value Acceleration Bandwidth @ 1ms sample rate 110Hz Measurement Range (XYZ Axis ±5g (49 m/s2) Acceleration...
Product Description The 1056 - PhidgetSpatial 3/3/3, 9 Axis IMU (Inertial Measurement Unit) measures static and dynamic acceleration in 3 axes, up to 5g.; it also measures magnetic field in 3-axes up to ±4 Gauss and finally measures angular rotation in 3 axes, up to ±400° per second. With the 1056, you are getting a lot more than 3 sensor chips slapped on a board. The 1056 has been rigorously tested to ensure that the output data correlates to physical real life motion, instead of relying...
Product Description The Phidget GPS provides the longitude and latitude of the board's position in signed decimal degree format. The position accuracy (best case) is 2.5m CEP (Circular Error of Probability). The 1040 also provides altitude, heading and velocity as well as the time and date. It will also let you know when it has a satellite fix. The PhidgetGPS has a 3V rechargeable lithium battery to provide "hot starts" by remembering its previous positions. With a live battery, the 1040 can...
Product Description The 1120 FlexiForce Adapter makes it easy to interface a Tekscan FlexiForce Force Sensor to your PC. Just use the cable included with the adapter. We even give you a round plastic disc for the sensing pad. The FlexiForce sensor is an ultra-thin and flexible printed circuit, which can be easily integrated into most applications. With its paper-thin construction, flexibility and force measurement ability, the FlexiForce force sensor can measure force between almost any two...
The 3852 Enclosure is designed to protect the 1018 - PhidgetInterfaceKit 8/8/8 while still giving you access to the ports and terminal blocks through openings in the enclosure.There are mounting holes that go through the bottom of the enclosure, so the board can be mounted to a flat surface and the cover can snap on top.Note: Phidget Interface Kit and mounting screws not included. ...
The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can be turned on and off, and its brightness controlled. Most standard LEDs with colors such as red, amber, orange, yellow, and green have forward voltages below 3.0 Volts, and can be used with the PhidgetLED by simply soldering them to a connector-wire and inserting the wire into any PhidgetLED board connector. Output Update Rate: 30 updates/second Output Anode Voltage: 3.3VDC Output Current (max): 30mA...
Product Features Connects to any typical two-bit optical encoder. Returns up to 500,000 counts per second. Can be used as an accurate human input device. Connects directly to a computer’s USB port. Product Description The PhidgetEncoder HighSpeed connects to any typical two-bit optical encoder and can return up to 500,000 counts per second. Specifically it reads a standard incremental non-differential TTL encoder. The 1057 can be used to measure shaft speed or as a very accurate human input...
Note: The 1047_1B is identical to the 1047_1 but no longer comes with associated cables. Cables sold separately: 3018 Mini USB Cable 180CM & 3019 HighSpeed Encoder Cable 50cmThe PhidgetEncoder Highspeed 4-Input can be used with a wide assortment of mechanical and optical encoders. The encoder should be of quadrature output type, indicating that there will be two quadrature output channels (usually labeled A and B) and an optional third output channel to signal when the index pin (a reference...
Additional cables for the Phidgets LED64. 4-Conductor, connectors on both ends, length is 60cm. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line, follow this link. Getting Started with Phidgets Phidgets Documentation: Manuals, data sheets, and tutorials for Phidgets products....
This is a 12-foot, 3-pin cable for connecting sensors to the analog inputs on the Phidgets 8/8/8 Interface Kit. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line, follow this link. Getting Started with Phidgets Phidgets Documentation: Manuals, data sheets, and tutorials for Phidgets...
Product Specifications Sensor Output Type: Non-Ratiometric Response Time Max:2ms Peak Sensitivity Wavelength:625 nm Light Level Min:1 lux Light Level Max(5v): 1000 lux Light Current Ratio:1.2 Device Current Consumption: 5 mA Output Impedance: 1K ohms Bandwidth / Reaction Time: 50 Hz Minimum / Maximum Voltage: 2.4VDC to 5.5VDC Operating Temp Min:-40° Operating Temp Max:85° This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low...
The PhidgetServo 1-Motor is a USB based controller that can control a Remote Control (RC) servo motor. The motor output is powered directly from the USB port. The PhidgetServo has a step accuracy of 0.1 degrees, but the actual positional accuracy of the servo motor is dependant on the physical characteristics of the specific servo used. If you need a servo with this controller, buy the kit instead and save some money. Comes packaged with a 6-foot USB Cable, and a Getting Started Manual. For...
The PhidgetInterfaceKit 0/16/16 provides: 16 Digital Inputs sensing up to 30VDC 16 Digital Outputs controlling up to 30VDC LED indicators on all I/O channels The Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a switch to ground, and is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial...
This is a 24-inch, 3-pin cable for connecting sensors to the analog inputs on the Phidgets 8/8/8 Interface Kit. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line, follow this link. Getting Started with Phidgets Phidgets Documentation: Manuals, data sheets, and tutorials for Phidgets...
Based on the QRB1114 this sensor can detect an object at 5mm. It can be used to determine the difference between black (low reflective conditions) and white (high reflective conditions). Includes 24" Phidget sensor cable. Board Dimensions: 3.0 x 3.8 cm Mounting Holes: 2.3 x 3 This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are...
Temperature sensor with a range of -30°C to +80°C with a typical error of ±0.75°C in the 0°C to 80°C range. Note: The temperature sensor component is rated at -50°C to +150°C, but the other components on the board, the connector and the cable are rated at -30°C to +80°C. A 24" sensor cable is included. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O...
Control 8 DPDT mechanical relays, switching up to 250VAC/2A or 120VDC/2A.The PhidgetInterfaceKit 0/0/8 provides Small Signal Relays with 8 Relay Outputs, rated at 250VAC, or 2 Amps, for a maximum of 60 Watts. While typical mechanical relay boards are unable to switch signals due to an oxide buildup on the contacts, the 1017 excels at switching both signals and low-power applications.
The PhidgetAdvancedServo 8-Motor allows you to control the position, velocity, and acceleration of up to 8 RC servo motors. It requires a 6-15VDC external power supply; its switching power supply allows the 1061 to efficiently operate from 6 to 15 VDC and can be used with a wide range of batteries. The 1061 has a high resolution of 125 steps per degree; it measures the power consumption of each servo and its switching regulator protects the motors from overvoltage. It powers servo motors of up...
The Voltage Sensor measures the differential voltage between the input terminals and outputs the difference proportionally. The maximum differential voltage that can be measured accurately is ±30V. Resources Product Manual Product Specifications Characteristic Value Current Consumption 3.6mA Input Impedance 1MegaOhm Recommended Max Difference between Vin+ and Vin- 30V Absolute Maximum difference between Vin+ and Vin- 35V Input CMR 40V Output Range 0 to 5V Min/Max error ±2% Typical Error...
The Phidgets RFID Reader is a great tool to add RFID functionality to your computer application. Using Phidget's extensive collection of libraries and APIs you can easily control the RFID reader via a variety of programming languages. The Phidget RFID reads tags that are brought in close proximity (within 4 inches, depending on the tag). The reader reads EM4102 type tags and operates at 125 kHz. In addition to reading cards, this unit also has two 5v outputs labeled "+5V" and "LED". These work...
Product Features Measures sound pressure level (SPL) between 50db to 100dB Frequency range of 100Hz to 8kHz Can be used to detect sounds, and approximate how loud the sound is The sensor is Non-Ratiometric. Product Description The 1133 measures sound across a very wide range, with a frequency range of 100Hz to 8kHz and pressure level from 50dB to 100dB. Product Specifications Characteristic Value Current Consumption 8.5 mA Resolution 30mV/db Input Sound Range 50db to 100db Error (@ 1000Hz)...
Product Features Infra Red thermometer for non contact temperature measurements Thermometer is Factory calibrated Temperature range of -70 to 380°C Connects directly to a computer's USB Port Product Description The 1045 is an intelligent non-contact temperature sensor with a 10° field of view and a USB interface for easy connection to your computer. It measures the temperature of objects placed within its cone of detection. The 1045 outputs a continuous data flow every 32ms with an active...
The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors. The PhidgetStepper can be used in applications that require precise positioning and continuous rotation, at low cost. Specifications: Position Resolution: 1/2 step (40-bit signed) Upper Position Limit: 2^39 - 1 1/2 steps Lower Position Limit: -(2^39 - 1) 1/2 steps Velocity Resolution: 0.75 1/2 steps/second (9-bit) Velocity Limit: 383.25 1/2 steps/second Acceleration...