BudgetBot Chassis

Tools Needed

1.5mm Hex Key (Included) 2.5mm Hex Key (Included)

Parts List

Note: Some of the parts in some assemblies come packaged in separate smaller bags because they come with a bracket or other various part. Please review the entire parts list to ensure you have all necessary components. Some kits will have spare bolts, nuts, or screws included.

1 X	1 X	1 X
1 X	2 X	2 X
1 X	2 X

3 X	12 X	21 X	1 X
4 X	9 X	18 X	2 X

Assemble the Wheels

Mount the Right Side Wall to one of the Motors. 6 x

Repeat for the Left Side Wall. 6 x

Mount the Hubs onto the Shaft of the Right Motor using the supplied Set Screws.

Repeat for the Left Side.

Mount the Wheel onto the Right Hub using the supplied Slip Ring. *Not Pictured - Attach supplied Motor Cable to Motor.

Repeat for the Left Side. *Not Pictured - Attach supplied Motor Cable to Motor.

Assemble the BudgetBot

Mount Standoff Sets to the top of the Lower Deck comprised of: (15mm M-F + 30mm F-F + 15mm M-F) 9 x 9 x 18 x

Time to jump over to the Ball Caster Assembly guide in order to assemble the Caster Ball Caster Assembly Guide

Mount the Side Walls, Motors Support Walls, and the Front Wall into the slots of the Lower Deck.

Mount the Arduino Mounting Standoffs onto the top of the Upper Deck. 3 x 3 x

Mount the Upper Deck to the Standoff sets and onto the tabs of the mounted Walls. 9 x

Now attach all other equipment: Microcontrollers, Sensors, Batteries, Lasers, etc. to your completed BudgetBot Chassis.

Fin