Custom MX-106T Dual Axis Robot Joint Kit Custom, Frame, Dual Axis, Dynamixel, Robotis, Servo, Bracket, EX-106+, Robot, Joint
Price: $1,199.99
Availability: In Stock
Robotis Co. Item #: KIT-M-300-B-EX106-DARJ -

    This dual axis robot joint is an advanced robotic joint kit using the MX-106T DYNAMIXEL from ROBOTIS. This Joint Kit is perfectly suited for a variety of robot applications, such as a humanoid robot ankle/hip joint or a Coxa joint in a quadrupedal or hexapod robot. *Pitch & Roll Degree of Freedom on same lateral axis *1400+ oz-in Torque Robotic Actuators *Ball Bearing Axis *Standardized Mounting Pattern *High Quality 5052/6061 Aircraft Aluminum Alloy Frame *Full Feedback Capabilities;...

    Double MX-106T Robot Joint Kit Custom, Frame, Double, Axis, Dynamixel, Robotis, Servo, Bracket, EX-106+, Robot, Joint, MX-106, MX-106T
    Price: $1,099.99
    Availability: In Stock
    Robotis Co. Item #: KIT-M-300-B-MX106-DUALJOINT -

      This double MX-106T robot joint is an advanced robotic joint kit using a pair of linked MX-106T Dynamixel from Robotis. This Joint Kit outputs double the torque of the already massively powerful MX-106T servo. The MX-106T has a specific link cable (included) that pairs the servos so that they function as a single, ultra-powerful servo. It is perfectly suited for a variety of robot applications; various large scale humanoid robot joints, research level table-top robot arms, or any situation...

      Custom MX-106T 6 DOF Humanoid Robot Leg Kit Set Custom, Frame, Dual Axis, Dynamixel, Robotis, Servo, Bracket, EX-106+, Robot, Joint, Leg, 6 DOF, Degree of Freedom
      Price: $6,359.90
      Availability: Special Order
      InterbotiX Labs Item #: KIT-M-300-B-EX106-6DOFLEG -

      This 6 degree of freedom humanoid robot leg is an advanced robotic limb kit using the MX-106T DYNAMIXEL & MX-64T DYNAMIXEL from Robotis. This Humanoid Robot Leg provides a huge head start in building a high-end research level bipedal platform, utilizing top of the line robotic actuators from Robotis and a high quality machined aluminum skeletal frame. This leg kit does not come assembled. Epoxy will be required to assemble the feet and is not included. The kit does not come with a control or...

      GP2D12 Alternative IR Distance Sensor Kit (10-80 cm) - 1 sensor GP2D12 Alternative IR Distance Sensor Kit (4-30 Inch) - 1 sensor
      Price: $23.70
      Availability: In Stock
      Trossen Robotics Item #: KIT-S-10-P1101KT -

        One of the most favored IR range sensors on the market. Detects distances from 4" to 30" (10cm-80cm). Note: The sensor sold here is actually a Sharp IR GP2Y0A21YK0F. It has the same distance range as a GP2D12 and very similar analog output properties. The GP2D12 is extremely difficult to source currently, so these sensors provide a great alternative. For more information on the minor differences, please refer to the datasheets for each sensor: Datasheets GP2D12 Datasheet GP2Y0A21YK0F...

        1.5 Inch Force Sensing Resistor (FSR) FSR, Force sensing Resistor, Robot Force Sensors, Robot Touch Sensor, Robot Pressure Sensor
        Price: $7.95
        Availability: In Stock
        Interlink Item #: S-20-1000-FS15 -

          These FSR's are perfect for robotic grippers, robot feet, and similar applications. We searched long and hard to find a flat force sensing resistor that we liked. When we tried these bad boys out for the first time we knew the search was over. Paper thin and well made, these FSR's are just plain fun to play with. FEATURE LIST Various sizes: .2", .5", 1.5", 24" strip Rubber backing Peel sticker backing Choice of male tabs or female connector Use voltage divider to adjust sensitivity band...

          25W Step down adjustable switching regulator
          Price: $25.00
          Availability: Back Order
          Dimension Engineering Item #: P-VR-DE-SWADJ3 -

            The DE-SWADJ 3 is an adjustable step down voltage regulator. The DE-SWADJ 3 is designed to be stronger, faster and better. It can process 3A of current, typical ripple is 25mV and under ideal circumstances the regulator can be up to 96% efficient. It continues the ease-of-use of the DE-SWADJ, making it simple to add an adjustable voltage source to a new or existing project with all the efficiency benefits of switch-mode power. The DE-SWADJ 3 is pin-compatible with the common 78XX family of...

            8 Inch FlexiForce 0-100 lbs. Resistive Force Sensor flexiforce, flexi force, FSR, force sensing resistor, load sensor, force sensor, piezoresistive force sensor, resistive force sensor, thin film resistive force sensor
            Price: $24.95
            Availability: In Stock
            Tekscan Inc. Item #: TI-FS100LB -

              100-Pound FlexiForce Force Sensor Measures from 0 to 100 lbs. FlexiForce Sensor Model A201.   FlexiForce is... A versatile, durable piezoresistive force sensor that can be made in a variety of shapes and sizes A piezoresistive sensing device in which resistance is inversely proportional to applied force A customizable, economical force measurement tool that is easily integrated into OEM products A patented, ultra-thin (0.008"), flexible printed circuit that senses contact force A...

              FS90 Analog Micro Plastic Gear Servo FS90 Analog Micro Plastic Gear Servo, analog micro servo, plastic gear servo, 9g plastic servo, 9g servo, micro servo, analog servo, 9g micro servo
              Price: $6.95
              Availability: In Stock
              RobotGeek Item #: FT-FS90 -

                Need a tiny servo for a tiny task? Try the FS90 Micro Plastic Gear Servo! This servo is great for scanning type sensors, tiny robots, and more! Each servo comes with a variety of horns. These servos use a standard PWM signal to control them. The Arduino does a great job of controlling PWM Servos, making it ideal for a variety of robotic projects. But sometimes powering these servos can be problematic. Powering servos from the Arduino's 5v regulator leads to underpowered servos, limited by both...

                Grove - 3-Axis Accelerometer Grove 3-Axis Accelerometer, 3-axis accelerometer, arduino accelerometer, Grove accelerometer, accelerometer sensor
                Price: $16.95
                Availability: In Stock
                Seeed Studio Item #: SS-SEN21853P -

                  Description This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C. This Grove can be used for sensing data changes, product orientation, and gesture detection through an interrupt pin (INT).It is a very low power, low profile capacitive MEMS sensor Grove. What is new Mounting edge for you to solder I2C Groves together, and free you from wiring. Flat bottom. 5VDC input Features Grove compatible interface 3 axis motion/orientation sensing Digital Output (I2C) 10,000 g...

                  Grove - 3-Axis Compass Grove 3-Axis Compass, arduino compass, compass sensor, 3-axis compass, arduino compass sensor
                  Price: $15.90
                  Availability: Back Order
                  Seeed Studio Item #: SS-SEN12753P -

                    Description 3-Axis Compass module, a member of Grove family uses I²C based Honeywell HMC5883L digital compass. This ASIC is equipped with high resolution HMC118X magneto-resistive sensors and a 12-bit ADC. It provides compass heading accuracy up to 1° to 2°. Signal conditioning like amplification, automatic degaussing strap drivers and offset cancellation are inbuilt. This Grove module also includes a MIC5205-3.3 for power supply requirement. Hence user can connect any 3.3V to 6V DC power...

                    Grove - 3-Axis Gyro Grove 3-Axis Gyro 3-axis gyro, arduino gyro, Grove gyro, gyro sensor, gyroscope sensor, arduino gyroscope, Grove gyroscope
                    Price: $39.95
                    Availability: In Stock
                    Seeed Studio Item #: SS-SEN11763P -

                      Description Grove - 3-axis Gyro module based on ITG 3200. It is the world’s first single-chip, digital-output, 3-axis MEMS motion processing gyro optimized for gaming, 3D mice, and motion-based remote control applications for Internet connected Digital TVs and Set Top Boxes. The ITG-3200 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyro outputs, a user-selectable internal low-pass filter bandwidth, and a Fast-Mode I2C (400kHz) interface. Grove - 3-axis Gyro is...

                      Grove - Electricity Sensor Grove Electricity Sensor, arduino electricity sensor, electrical sensor, electricity detection sensor
                      Price: $7.95
                      Availability: In Stock
                      Seeed Studio Item #: SS-SEN23931P -

                        Description The Electricity sensor module is a member of Grove. It is based on the TA12-200 current transformer which can change large alternating current into a small amplitude. You can use it to test large alternating current upto 5A. Features Grove compatible interface Maximum 5A input High accuracy Small size Applications Alternating current measurment Device condition monitoring Document Datasheet ...

                        Grove - Light Sensor Grove Light Sensor, arduino light sensor, freeduino light sensor, seeeduino light sensor
                        Price: $4.95
                        Availability: Back Order
                        Seeed Studio Item #: SS-SEN11302P -

                          Description The Light sensor module uses the GL5528 photoresistor to detect the light intensity of the environment. The resistance of the sensor decreases when the light intensity of the environment increases. The chip LM358 is used as a voltage follower to enable you get a accurate data. Features Grove compatible interface Wide supply voltage range: 3V-30V 2.0cm x 2.0cm Grove module? Minimum external parts Applications Ideas Electronic toys Light-control switch Monitor Documents Please visit...

                          Grove - Magnetic Switch Sensor Grove Magnetic Switch, Grove Magnet, Magnetism Switch, Magnet switch, arduino magnet switch, magnetism sensor, arduino magnetic sensor
                          Price: $4.95
                          Availability: In Stock
                          Seeed Studio Item #: SS-COM11335P -

                            Description This is a Grove interface compatible Magnetic switch module. It is based on encapsulated dry reed switch CT10. CT10 is single-pole, single throw (SPST) type, having normally open ruthenium contacts. The sensor is a double-ended type and may be actuated with an electromagnet, a permanent magnet or a combination of both. The magnetic switch is a wonder tool for designers who would like to turn a circuit on and off based on proximity. Features Grove compatible interface 2.0cm x 2.0cm...

                            Grove - Rotary Angle Sensor Grove Rotary Angle Sensor, Rotary Angle Sensor, arduino potentiometer, turn knob
                            Price: $4.95
                            Availability: In Stock
                            Seeed Studio Item #: SS-COM22735P -

                              Description The potentiometer Grove produces analog output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The D2 connector is not used. The angular range is 300 degrees with a linear change in value. The resistance value is 10k ohms, perfect for Arduino use. This may also be known as a rotary angle sensor. Document How to use ...

                              Grove - Serial LCD 16x2 Grove Serial LCD, Grove Serial LCD 16x2, Serial LCD, Seeedstudio LCD, Arduino LCD, Arduino Display, Grove LCD
                              Price: $14.95
                              Availability: In Stock
                              Seeed Studio Item #: SS-LCD23154P -

                                Description Serial LCD Driver Grove is an UART based LCD1602 display (Hitachi HD44780 or a compatible LCD). It can control LCD1602 only with two I/O port pins (UART Tx and Rx).The VCC and GND are the only additional pins required for operation. Conventional LCD drivers use 7-11 I/O port pins, whereas Serial LCD grove saves all these additional I/O pins. Serial LCD grove uses AT89S52 for implementing the UART Driving logic. Now has been updated to v1.0b. Features Very easy to use. 4-Pin...

                                Grove - Temperature & Humidity Sensor Grove Temperature Sensor, Grove Humidity Sensor, Grove Temperature Humidity Sensor Grove sensor, Temperature Humidity Sensor, arduino temperature sensor, freeduino sensor, seeeduino sensor
                                Price: $6.95
                                Availability: Back Order
                                Seeed Studio Item #: SS-SEN11301P -

                                  Description This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity and the temperature is measured by a negative temperature coefficient (NTC) thermistor. It has excellent reliability and long term stability. Please note that this sensor will not work for temperatures below 0 degree. Features Relative Humidity and temperature measurement Full range temperature compensation Calibrated Digital signal Long...

                                  Grove - Temperature Sensor Grove Temperature Sensor, Grove sensor, Temperature Sensor, arduino temperature sensor, freeduino sensor, seeeduino sensor
                                  Price: $4.95
                                  Availability: In Stock
                                  Seeed Studio Item #: SS-SEN23292P -

                                    Description The temperature sensor Grove uses a thermistor which returns the ambient temperature in the form of a resistance value, which is then used to alter Vcc (5V with our Seeeduinos). Our board then converts this voltage value measured by an analog input pin to a temperature. The operating range is -40 to 125 degrees Celsius, with an accuracy of ?1.5?C. Document Datasheet How to use ...

                                    Grove - Touch Sensor Grove Touch Sensor, Arduino touch sensor, touch sensor, grove touch sensor
                                    Price: $4.95
                                    Availability: Back Order
                                    Seeed Studio Item #: SS-SEN11303P -

                                      Description This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223-B touch detector IC It measures the capacitance of a metallic pad. It can detect the change in capacitance when a finger is near it. This is the same technology used in the iPhone touch screen. So you can place the metallic pad under a non-metallic surface such as a plastic or glass sheet and it will still work as a button. This may be useful for projects that need to be...

                                      Grove Alcohol Sensor Grove Alcohol Sensor
                                      Price: $9.95
                                      Availability: In Stock
                                      Seeed Studio Item #: SS-SEN21723P -

                                        Have you lost your beer? Do you need help finding it? You need an alcohol sensor. Features Power requirements: 5 VDC @ ~120 mA (heater on) Detection Gas: Alcohol Concentration: 20-1000ppm Alcohol Interface: 1 TTL compatible input (SEL), 1 TTL compatible output (DAT) Dimension: 40×20×12mm Heater Voltage: 0.9V ± 0.1V AC or DC Heater Current: 120±20mA Preheat time: Over 48 hours Product DOCUMENTATION / WIKI Page. *NOTE - Obviously, this is not a legal alcohol breathalyzer device. Don't be an...

                                        Grove- 5V Relay Module
                                        Price: $6.95
                                        Availability: In Stock
                                        Seeed Studio Item #: SS-COM22639P -

                                          Description The Relay Grove is a digital normally open switch that controls a relay capable of switching much higher voltages and currents than your normal Arduino boards. When set to HIGH, the LED will light up and the relay will close allowing current to flow. The peak voltage capability is 250V at 10 amps. Please exercise great care when working with mains voltages— if in doubt contact a professional such as a licensed electrician for help. Document How to use ...

                                          Lithium-ion Battery Charger Lithium-ion Battery Charger
                                          Price: $12.95
                                          Availability: In Stock
                                          RobotGeek Item #: CHG-LION -

                                            Standard Lithium-Ion Battery Charger intended for use with the Lithium Ion Battery 7.4v 2200mAh (2S2P) with PCM.

                                            LV-MaxSonar-EZ2
                                            Price: $29.95
                                            Availability: In Stock
                                            MaxBotix Inc. Item #: S-10-EZ2 -

                                              The graph above shows the detection pattern for a 4-foot tall, 3.25-inch diameter post.  Grid squares equal 1 foot. For more information on the LV-MaxSonar®-EZ2™ please... download the datasheet:LV-MaxSonar-EZ2-Datasheet.pdf The LV-MaxSonar-EZ2 offers very short to long-range detection and ranging, in an incredibly small package with ultra low power consumption. The MaxSonar-EZ2 detects objects from 0-inches to 254-inches (6.45-meters) and provides sonar range information from 6-inches...

                                              Phidget Sound Sensor Phidget, Sound, Sensor
                                              Price: $35.00
                                              Availability: In Stock
                                              Phidgets Inc Item #: PH-1133 -

                                                Product Features Measures sound pressure level (SPL) between 50db to 100dB Frequency range of 100Hz to 8kHz Can be used to detect sounds, and approximate how loud the sound is The sensor is Non-Ratiometric. Product Description The 1133 measures sound across a very wide range, with a frequency range of 100Hz to 8kHz and pressure level from 50dB to 100dB. Product Specifications Characteristic Value Current Consumption 8.5 mA Resolution 30mV/db Input Sound Range 50db to 100db Error (@ 1000Hz)...

                                                Phidget Temperature Sensor IR Phidget Temperature Sensor, Phidgets Temperature Sensor, Phidget Temperature Sensor IR
                                                Price: $75.00
                                                Availability: In Stock
                                                Phidgets Inc Item #: PH-1045 -

                                                  Product Features Infra Red thermometer for non contact temperature measurements Thermometer is Factory calibrated Temperature range of -70 to 380°C Connects directly to a computer's USB Port Product Description The 1045 is an intelligent non-contact temperature sensor with a 10° field of view and a USB interface for easy connection to your computer. It measures the temperature of objects placed within its cone of detection. The 1045 outputs a continuous data flow every 32ms with an active...

                                                  Phidgets IR Reflective Sensor 10cm Phidget IR Reflective Sensor 10cm, Phidgets IR Reflective Sensor, IR Reflective Sensor
                                                  Price: $11.00
                                                  Availability: In Stock
                                                  Phidgets Inc Item #: PH-1103 -

                                                    This sensor can detect the presence of a highly reflective object at 10cm, for less reflective objects (like hands) the distance is about 5cm.  Includes 24" Phidget sensor cable. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line, follow this link. Getting Started with...

                                                    Phidgets Unipolar USB 4-Motor Stepper Controller usb stepper controller, usb stepper motor contoller, phidgetstepper, PhidgetStepper Unipolar USB Stepper Controller, phidgets stepper controller
                                                    Price: $75.00
                                                    Availability: Back Order
                                                    Phidgets Inc Item #: PH-1062 -

                                                      The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors. The PhidgetStepper can be used in applications that require precise positioning and continuous rotation, at low cost. Specifications: Position Resolution: 1/2 step (40-bit signed) Upper Position Limit: 2^39 - 1 1/2 steps Lower Position Limit: -(2^39 - 1) 1/2 steps Velocity Resolution: 0.75 1/2 steps/second (9-bit) Velocity Limit: 383.25 1/2 steps/second Acceleration...

                                                      Pololu Ball Caster with 3/4 Inch Plastic Ball
                                                      Price: $5.99
                                                      Availability: In Stock
                                                      Pololu Item #: PO-954 -

                                                        Overview This ball caster kit includes a black ABS housing, a 1/2" diameter plastic ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of this ball caster is 0.91" with no spacers. You can also adjust the height by adding the spacers. The ball caster can be mounted to a chassis by the two screw sets included in the kit. The distance between the two screw holes is 0.24". ...

                                                        300mm 3-pin Female Sensor Cable 10 pack
                                                        Price: $4.95
                                                        Availability: In Stock
                                                        RobotGeek Item #: CBL-JRFEM -

                                                          RobotGeek Sensor Cables are for use with all RobotGeek sensors, shields, servos, and output devices. These cables are .1"(2.54mm) pitch and are 300mm in length with color coded wires. Add some 3-Pin Couplers to connect cables together for extension cables. These cables are also compatible with Phidgets Sensors and Electronic Brick Sensors, though they do not have the plastic buckle like traditional Phidgets/Electronic Brick Cables. ...

                                                          Sabertooth dual 25A motor driver
                                                          Price: $124.99
                                                          Availability: Back Order
                                                          Dimension Engineering Item #: C-100-DC-2x25 -

                                                            The Sabertooth 2X25 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for high powered robots - up to 100lbs in combat or 300lbs for general purpose robotics.  Out of the box, the Sabertooth can supply two DC brushed motors with up to 25A each. Peak currents of 50A per channel are achievable for a few seconds.  Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental...

                                                            Sharp IR Distance Sensor GP2Y0A02YK (20-150 cm)
                                                            Price: $15.00
                                                            Availability: In Stock
                                                            Item #: PO-1137 -

                                                              This sensor takes a continuous distance reading and reports the distance as an analog voltage with a distance range of 20cm (~8") to 150cm (~60"). The interface is 3-wire with power, ground and the output voltage and requires a JST 3-pin connector (not included). The JST 3-pin connector includes the J3 connector for the sensor and bare wires at the other end, and requires that the processor or ADC-side connector be purchased or built separately. For most applications we recommend...

                                                              SoftPot Linear Potentiometer - 50mm
                                                              Price: $12.95
                                                              Availability: In Stock
                                                              SparkFun Item #: S-20-SEN-08680 -

                                                                These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. Unit comes with adhesive...

                                                                Switch - Floor Mat - 5 feet x 30 Inches
                                                                Price: $74.95
                                                                Availability: In Stock
                                                                Item #: KIT-AC-700-30-926A -

                                                                  The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

                                                                  Bioloid Frame F1 Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                  Price: $1.49
                                                                  Availability: In Stock
                                                                  Robotis Co. Item #: RO-903-0035-001 -

                                                                    The Bioloid Frame F1 angled bracket is used to mount AX-Series servos to leave space for proper angular shoulder and knee movement on a Bioloid frame, or it can be used in any robotics project utilizing Dynamixel AX-12 robot actuators and brackets. Looking for metal brackets? We carry Bioloid Frame Metal F1 Brackets, compatible with AX-12 and AX-12+ mounting points. ...

                                                                    Bioloid Frame F2 Bioloid, Robotis, Bioloid Bracket, Frame, Bracket
                                                                    Price: $1.49
                                                                    Availability: In Stock
                                                                    Robotis Co. Item #: RO-903-0036-001 -

                                                                      The Bioloid Frame F2 angled bracket is used to mount AX-Series servos as elbow joints on a Bioloid frame, or it can be used in any robotics project utilizing Dynamixel AX-12 robot actuators and brackets. Looking for metal brackets? We carry Bioloid Frame Metal F2 Brackets, compatible with AX-12 and AX-12+ mounting points.

                                                                      Bioloid Frame F3 Bioloid, Robotis, Bioloid Bracket, Frame, Bracket
                                                                      Price: $1.49
                                                                      Availability: In Stock
                                                                      Robotis Co. Item #: RO-903-0037-001 -

                                                                        The Bioloid Frame F3 small bracket is used to mount AX-12 servos to other brackets, or it can be used in any robotics project utilizing Dynamixel AX-12 robot actuators and brackets. Looking for metal brackets? We carry Bioloid Frame Metal F3 Brackets, compatible with AX-12 and AX-12+ mounting points.

                                                                        Bioloid Frame F4 Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                        Price: $1.75
                                                                        Availability: In Stock
                                                                        Robotis Co. Item #: RO-903-0038-001 -

                                                                          The Bioloid Frame F4 extended bracket has the same mounting positions as the F2 bracket. Unlike the F2, with its extra long arms, it allows room for an entire AX-12 motor to pass through it! This is used on a bioloid as a complex ankle, and it can be used in any robotics project utilizing Dynamixel AX-12 robot actuators and brackets. Looking for metal brackets? We carry Bioloid Frame Metal F4 Brackets, compatible with AX-12 and AX-12+ mounting points. Projects Using the AX-12 Dynamixel Servos...

                                                                          Bioloid Frame F5 Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                          Price: $1.75
                                                                          Availability: In Stock
                                                                          Robotis Co. Item #: RO-903-0039-001 -

                                                                            The Bioloid Frame F5 wide bracket is used on a bioloid to hold two AX-12 motors onto a third, allowing complex movement on three axes of the hips and ankles. It can be used in any robotics project utilizing Dynamixel AX-12 robot actuators and brackets. Looking for metal brackets? We carry Bioloid Frame Metal F5 Brackets, compatible with AX-12 and AX-12+ mounting points. Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                            GP2Y0A02YK IR Sensor Kit   (20-150 cm) - 1 sensor
                                                                            Price: $25.75
                                                                            Availability: In Stock
                                                                            Trossen Robotics Item #: KIT-S-10-GP2Y0A02YKT -

                                                                              This Phidget IR Distance Sensor Kit includes everything you need to add a Sharp GP2Y0A02YK distance sensor to the 8/8/8 Interface Kit.Kit includes: GP2Y0A02YK IR Sensor (20-150 cm / 8-60 inches) Phidget IR Distance Sensor Interface Board 12" Sharp GP2D12 Cable This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the...

                                                                              Bioloid Frame F6 Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                              Price: $1.75-$2.49
                                                                              Availability: Back Order
                                                                              Robotis Co. Item #: RO-903-0040-001 -

                                                                                The Bioloid Frame F6 small bracket is used on a bioloid to hold two AX-12 motors together, allowing a solid 2 axes of movement. It can be used in any robotics project utilizing Dynamixel AX-12 robot actuators and brackets. Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                Bioloid Frame F7 Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                                Price: $1.75-$2.75
                                                                                Availability: In Stock
                                                                                Robotis Co. Item #: RO-903-0041-001 -

                                                                                  The Bioloid Frame F7 small bracket is used on a bioloid in the ankle joint. It can be used in any robotics project utilizing Dynamixel AX-12 robot actuators and brackets.

                                                                                  Bioloid Frame F8 Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                                  Price: $1.75-$2.75
                                                                                  Availability: In Stock
                                                                                  Robotis Co. Item #: RO-903-0042-001 -

                                                                                    The Bioloid Frame F8 bracket can be used in any robotics project utilizing Dynamixel AX-12 robot actuators and brackets. Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                    Bioloid Frame F9 Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                                    Price: $1.49-$2.49
                                                                                    Availability: In Stock
                                                                                    Robotis Co. Item #: RO-903-0043-001 -

                                                                                      The Bioloid Frame F9 bracket can be used in any robotics project utilizing Dynamixel AX-12 robot actuators and brackets. Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                      24 Inch Force Sensing Resistor (FSR) Strip FSR, Force sensing Resistor, Robot Force Sensors, Robot Touch Sensor, Robot Pressure Sensor
                                                                                      Price: $18.00
                                                                                      Availability: Back Order
                                                                                      Interlink Item #: S-20-1000-FS24 -

                                                                                        These FSR's are perfect for robotic grippers, robot feet, and similar applications. We searched long and hard to find a flat force sensing resistor that we liked. When we tried these bad boys out for the first time we knew the search was over. Paper thin and well made, these FSR's are just plain fun to play with. FEATURE LIST Various sizes: .2", .5", 1.5", 24" strip Rubber backing Peel sticker backing Choice of male tabs or female connector Use voltage divider to adjust sensitivity band...

                                                                                        Servo Cable
                                                                                        Price: $12.95
                                                                                        Availability: In Stock
                                                                                        RobotGeek Item #: CBL-32SEN -

                                                                                          Our 32 Feet Standard Servo Wire is great for repairing and extending servo and sensor cables. The Futaba Black-Red-White (Ground-Voltage-Signal) color scheme will help you keep your signals straight. This cable has 24awg stranded wire and no connectors on either end.

                                                                                          8 Inch FlexiForce 0-1 lbs. Resistive Force Sensor Kit flexiforce, flexi force, FSR, force sensing resistor, load sensor, force sensor, piezoresistive force sensor, resistive force sensor, thin film resistive force sensor
                                                                                          Price: $34.95
                                                                                          Availability: In Stock
                                                                                          Tekscan Inc. Item #: KIT-S-20-1000-FS1LB-KT -

                                                                                            This kit includes the following: (1) 0-1 lbs FlexiForce Force Sensor (1) Phidget Flexiforce Adapter This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line, follow this link. Getting Started with Phidgets Phidgets Documentation: Manuals, data sheets, and tutorials for Phidgets products....

                                                                                            Bioloid Frame F10 Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                                            Price: $1.25-$2.25
                                                                                            Availability: In Stock
                                                                                            Robotis Co. Item #: RO-903-0044-001 -

                                                                                              The Bioloid Frame F10 bracket can be used in any robotics project utilizing Dynamixel AX-12 robot actuators and brackets. Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                              FS90MG Micro Metal Gear Servo Fitec FS90MG Micro Metal Gear Servo, metal gear servo, 9g servo, 9g metal gear servo, 9g micro metal gear servo, 9g metal servo, metal gear servo, micro servo
                                                                                              Price: $9.95
                                                                                              Availability: In Stock
                                                                                              RobotGeek Item #: FT-FS90MG -

                                                                                                Need a tiny servo for a tiny task? Try the FS90 Micro Plastic Gear Servo! This servo is great for scanning type sensors, tiny robots, and more! Each servo comes with a variety of horns. The metal gears give this servo even more power and durability! These servos use a standard PWM signal to control them. The Arduino does a great job of controlling PWM Servos, making it ideal for a variety of robotic projects. But sometimes powering these servos can be problematic. Powering servos from the...

                                                                                                LiPo/Li-ion Battery Wiring Harness battery, wiring, harness, power, dean plug, barrel plug, battery link, lipo battery harness, lipo harness
                                                                                                Price: $8.95
                                                                                                Availability: In Stock
                                                                                                InterbotiX Labs Item #: CBL-HARNESS -

                                                                                                  Easily link your project to a LiPo/Li-ion battery with the Battery Wiring Harness! This harness is the same one we use in our Hexapod and Quadruped kits. Just attach the male Dean connector to any of our LiPo/Li-ion Batteries and the barrel jack plug into your project, and you're ready to go! The harness even has a built in switch to quickly shut down power to your project. The switch is easily mountable - just cut a 6mm hole into your project and use the included nut and washer to securley...

                                                                                                  LV-MaxSonar-EZ3
                                                                                                  Price: $29.95
                                                                                                  Availability: In Stock
                                                                                                  MaxBotix Inc. Item #: S-10-EZ3 -

                                                                                                    The graph above shows the detection pattern for a 4-foot tall, 3.25-inch diameter post.  Grid squares equal 1 foot. For more information on the LV-MaxSonar®-EZ3™ please... download the datasheet:LV-MaxSonar-EZ3-Datasheet.pdf The LV-MaxSonar-EZ3 offers very short to long-range detection and ranging, in an incredibly small package with ultra low power consumption. The MaxSonar-EZ3 detects objects from 0-inches to 254-inches (6.45-meters) and provides sonar range information from 6-inches...

                                                                                                    Phidgets InterfaceKit 0/0/4 Phidgets 0/0/4 Interface Kit, Phidgets InterfaceKit 0/0/4, PhidgetInterfaceKit 0/0/4, Phidgets InterfaceKit 004, PhidgetInterfaceKit 004, Phidget 0/0/4 Interface Kit, Phidget InterfaceKit 0/0/4, phidget 004, phidget 0/0/4
                                                                                                    Price: $60.00
                                                                                                    Availability: In Stock
                                                                                                    Phidgets Inc Item #: PH-1014 -

                                                                                                      The PhidgetInterfaceKit 0/0/4 Provides a convenient way to interface your PC with various higher-voltage devices such as incandescent bulbs, high-power relays, and motors. The 0/0/4 contains 4 Relay Outputs for switching AC or DC power; the relays are Single Pole Double Throw (SPDT). Maximum DC Switching Voltage: 100VDC Maximum DC Switching Current: 5A Maximum AC Switching Voltage: 250VAC Maximum AC Switching Current: 10A Note: When a relay is in one switch position for a period of time,...

                                                                                                      Pololu Ball Caster with 1 Inch Plastic Ball
                                                                                                      Price: $6.99
                                                                                                      Availability: In Stock
                                                                                                      Pololu Item #: PO-956 -

                                                                                                        Overview This ball caster kit includes a black ABS housing, a 1/2" diameter plastic ball, two spacers (1/16" and 1/8" thick), and three #2 screw sets. The total height of this ball caster is 1.1" with no spacers. You can also adjust the height by adding the spacers. The ball caster can be mounted to a chassis by the three screw sets included in the kit. The distance between the two screw holes is 0.70". ...

                                                                                                        RobotGeek 4 Line I2C LCD w/ Mount RobotGeek, 4 Line, LCD, Mount, display, backlight, backlit, blue, large, i2c
                                                                                                        Price: $14.95
                                                                                                        Availability: In Stock
                                                                                                        RobotGeek Item #: RG-LARGELCD -

                                                                                                          The RobotGeek 4 Line LCD w/ Mount is a perfect screen for your next project! With twice the space of the original RobotGeek LCD, you can easily display scrolling lists, paragraphs of text, or even make a tile-based game! The display can be easily mounted to projects and Workbenches. The bottom has the standard RobotGeek 1cm X 1cm grid making all RobotGeek products compatible with each other.

                                                                                                          Sabertooth dual 5A motor driver for R/C
                                                                                                          Price: $59.99
                                                                                                          Availability: In Stock
                                                                                                          Dimension Engineering Item #: C-100-DC-2x5RC -

                                                                                                            Product Description Sabertooth 2X5 R/C is a dual motor driver specifically optimized for use in radio controlled vehicles. It is suitable for small robots, cars and boats, and especially well suited for the Antweight and Beetleweight classes of fighting robots. Out of the box, it can supply two DC brushed motors with up to 5A each. Peak currents of 10A are achievable for a few seconds. Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental...

                                                                                                            SoftPot Linear Potentiometer - 100mm
                                                                                                            Price: $14.95
                                                                                                            Availability: In Stock
                                                                                                            SparkFun Item #: S-20-SEN08607 -

                                                                                                              These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. --> Unit comes with...

                                                                                                              Switch - Floor Mat - 25 Feet x 30 Inches
                                                                                                              Price: $334.95
                                                                                                              Availability: In Stock
                                                                                                              Item #: KIT-AC-700-30-926 -

                                                                                                                The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

                                                                                                                SyRen 10A regenerative motor driver
                                                                                                                Price: $49.99
                                                                                                                Availability: In Stock
                                                                                                                Dimension Engineering Item #: C-100-DC-SYREN10 -

                                                                                                                  Product Description The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. It is suitable for medium powered robots - up to 30lbs in combat or 100lbs for general purpose robotics. Out of the box, the SyRen 10 can supply a single DC brushed motor with up to 10A continuously. Peak currents of 15A are achievable for a few seconds. Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls...

                                                                                                                  Voltage Regulator Breakout Board
                                                                                                                  Price: $9.99
                                                                                                                  Availability: In Stock
                                                                                                                  Dimension Engineering Item #: P-VR-VregBreakout -

                                                                                                                    Product Description If you do not feel comfortable soldering, our voltage regulator breakout board can help. It extends the regulator's connection pins to a set of screw terminals that are easier to manipulate. To use the board, plug in the voltage regulator you want with the correct orientation. Then you can connect your power source and load by stripping wires and clamping them into the screw terminals. Now you can power wireless cameras, lighting systems and much more with minimum hassle....

                                                                                                                    XBee Explorer USB
                                                                                                                    Price: $24.95
                                                                                                                    Availability: In Stock
                                                                                                                    SparkFun Item #: SF-WRL-08687 -

                                                                                                                      This is a simple to use, USB to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit. This is a must have unit if you are using Xbee communication with the Robotics Connection Serializer WL Robot Controller, as it provides the PC side interface to the Xbee link....

                                                                                                                      Xbee Pro 60mW
                                                                                                                      Price: $37.95
                                                                                                                      Availability: Back Order
                                                                                                                      Parallax Item #: DK-6021280 -

                                                                                                                        This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formally Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks...

                                                                                                                        Bioloid Frame F11 Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                                                                        Price: $1.49
                                                                                                                        Availability: In Stock
                                                                                                                        Robotis Co. Item #: RO-903-0045-001 -

                                                                                                                          The Bioloid Frame F11 bracket is used as a hand on a bioloid frame, and can be used in any robotics project utilizing Dynamixel AX-12 robot actuators and brackets. Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                          Bioloid Frame F12 (Pair) Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                                                                          Price: $4.99
                                                                                                                          Availability: In Stock
                                                                                                                          Robotis Co. Item #: RO-903-0046-001 -

                                                                                                                            The Bioloid Frame F12 brackets are used as feet on a bioloid, and can be used in any robotics project utilizing Dynamixel AX-12 robot actuators and brackets. Looking for metal feet? We carry Bioloid Frame Metal F12 AX Foot (Pair), compatible with AX-12 and AX-12+ mounting points. Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                            Bioloid Frame F15/16 Torso Set Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                                                                            Price: $4.99
                                                                                                                            Availability: In Stock
                                                                                                                            Robotis Co. Item #: RO-903-0047-000 -

                                                                                                                              Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                              6 Inch Digital Calipers in box
                                                                                                                              Price: $14.95
                                                                                                                              Availability: In Stock
                                                                                                                              SparkFun Item #: SF-TOL-10997 -

                                                                                                                                6th Century BC: One of the earliest known calipers is lost on an Italian coast, to be found centuries later. 1851: Joseph R. Brown invents the modern vernier caliper. Today: You can own the next evolution in calipers, the Digital Caliper Whether you're measuring a component to get just the right fit in your project box, or you're trying to replicate a complex widget with your 3D printer, you'll need a trusty set of calipers by your side. These calipers even have a data out! This is great for...

                                                                                                                                8 Inch FlexiForce 0-25 lbs. Resistive Force Sensor Kit flexiforce, flexi force, FSR, force sensing resistor, load sensor, force sensor, piezoresistive force sensor, resistive force sensor, thin film resistive force sensor
                                                                                                                                Price: $34.95
                                                                                                                                Availability: In Stock
                                                                                                                                Tekscan Inc. Item #: KIT-S-20-1000-FS25LB-KT -

                                                                                                                                  This kit includes the following: (1) 0-25 lbs FlexiForce Force Sensor (1) Phidget Flexiforce Adapter This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line, follow this link. Getting Started with Phidgets Phidgets Documentation: Manuals, data sheets, and tutorials for Phidgets products....

                                                                                                                                  Adjustable Breadboard Power Supply Adjustable, Breadboard, Power Supply, arduino, freeduino
                                                                                                                                  Price: $15.37
                                                                                                                                  Availability: In Stock
                                                                                                                                  Seeed Studio Item #: SS-TOL123D3P -

                                                                                                                                    Another breadboard power supply designed by Seeed Studio. it can directly takes power from DC wall wart and outputs a selectable 5V or 3.3V regulated voltage. Compared to other breadboard power supply designs; this one provides mini-USB port like the seeeduino, you can toggle the switch and select your power source. (USB or dc jack). We also used JST-2pin power jack, the one as on Seeeduino. With this board, you can send power to both power lane of the breadboard, and each side has a on/off...

                                                                                                                                    Arduino Project Box Arduino, Project, Box, Duemilanove, Diecimila, Arduino Board, Arduino Kit, Arduino Diecimila USB IO Board, Arduino IO Board, Arduino Diecimila, Arduino Diecimila Board
                                                                                                                                    Price: $11.95
                                                                                                                                    Availability: In Stock
                                                                                                                                    Magyc Inc. Item #: MG-A000009 -

                                                                                                                                      What we have here is a (flame retardant) Arduino Project Box that allows you to safely enclose your Arduino + Shield projects and then set them on fire. Just kidding, please don't. But seriously! Rob your Arduino projects of their nudist free spirit attitudes and put some clothes on them, dang hippies. This enclosure can fit pretty much all Arduino and Arduino Mega models, as well as a majority of shields. It has specifically designed removable ports for use with the Arduino Ethernet shield....

                                                                                                                                      Bioloid Frame CM5 Adaptor Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                                                                                      Price: $3.99-$4.99
                                                                                                                                      Availability: In Stock
                                                                                                                                      Robotis Co. Item #: RO-903-0048-000 -

                                                                                                                                        Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                                        Bioloid Premium Frame FP04 F51/F52 Torso Set Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set, FP04, F51, F52, Torso
                                                                                                                                        Price: $6.95
                                                                                                                                        Availability: In Stock
                                                                                                                                        Robotis Co. Item #: RO-903-0179-000 -

                                                                                                                                          Bioloid FP04-F51/F52 Chest Frame Set, used in the Bioloid Premium Robot Kit. Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                                          Foot Switch Foot, Switch, pedal, physical, input, computing, arduino, freeduino, seeeduino
                                                                                                                                          Price: $5.50
                                                                                                                                          Availability: Back Order
                                                                                                                                          Seeed Studio Item #: SS-SWT129C6B -

                                                                                                                                            Building an electronic music project? Need to step on the gas? Perhaps this is the final component for your sub-orbital space fighter? Whatever your application is, this Foot Switch is perfect for all applications in need of a Foot Switch!

                                                                                                                                            LV-MaxSonar-EZ4
                                                                                                                                            Price: $29.95
                                                                                                                                            Availability: Back Order
                                                                                                                                            MaxBotix Inc. Item #: S-10-EZ4 -

                                                                                                                                              The graph above shows the detection pattern for a 4-foot tall, 3.25-inch diameter post.  Grid squares equal 1 foot. For more information on the LV-MaxSonar®-EZ4™ please... download the datasheet:LV-MaxSonar-EZ4-Datasheet.pdf The LV-MaxSonar-EZ4 offers very short to long-range detection and ranging, in an incredibly small package with ultra low power consumption. The MaxSonar-EZ4 detects objects from 0-inches to 254-inches (6.45-meters) and provides sonar range information from 6-inches...

                                                                                                                                              Parallax PIR Motion Sensor
                                                                                                                                              Price: $9.99
                                                                                                                                              Availability: In Stock
                                                                                                                                              Parallax Item #: PX-555-28027 -

                                                                                                                                                The PIR Sensor detects motion up to 20 feet away by using a Fresnel lens and infrared-sensitive element to detect changing patterns of passive infrared emitted by objects in its vicinity. Inexpensive and easy to use, it's ideal for alarm systems, motion-activated lighting, holiday props, and robotics applications. The PIR Sensor is compatible with all Parallax microcontrollers; sample BS1, BS2, and SX/B programs and product documentation are available under Downloads (coming soon!). Features:...

                                                                                                                                                Power Supply 6VDC 2.0A - US Power Supply 6VDC 2.0A, Power Supply, 6VDC, 2 amp
                                                                                                                                                Price: $9.95
                                                                                                                                                Availability: In Stock
                                                                                                                                                Top Power Co Item #: POW-6v2a -

                                                                                                                                                  Power Supply for general project use.North American Style Plug6VDC, 2 Amp, Center Positive Polarity, 5.5x2.1MM

                                                                                                                                                  RG90 Gear Motor RG90 Gear Motor, MOT-VIB08, Gear Motor, gearmotor, 6v gearmotor, 90rpm, 1:120, Arduino Motor, Robot Motor
                                                                                                                                                  Price: $5.95
                                                                                                                                                  Availability: In Stock
                                                                                                                                                  RobotGeek Item #: MOT-VIBO8 -

                                                                                                                                                    Weighing in at just 35 grams, this RG90 Gear Motor can put put an impressive 1.2 kg/cm of torque! That makes it great for small, wheeled robots! The double-flat output shaft is 7mm in diameter and is perfect for attaching to our Gear Motor Wheel. Our gear motors come with two- 300mm wires pre-soldered onto the motor. Each wire is terminated with a 2.54mm female connector. This makes them ideal for attaching to any 2.54mm pin connector. ...

                                                                                                                                                    Robot Controller Joystick - Medium  -3D  Medium Robot Controller Joystick, Joystick, Robot Joystick, 3 Dimension Joystick, 3 Degree Joystick, Robot  Controller, medium joystick, wired joystick
                                                                                                                                                    Price: $34.95
                                                                                                                                                    Availability: In Stock
                                                                                                                                                    OMTER Electronic Item #: OE-OM301 -

                                                                                                                                                      Are you ready to build one of the slickest robot controllers to ever control upon this earth? You can be with the Medium Robot Controller Joystick -3D. Like most joysticks, this one uses 2 potentiometers to measure the current angles of the joystick. However, this joystick has a hidden surprise - a third potentiometer within the control stick. Just twist the control stick, and you've got an extra control! Use your extra control to turn your robots arms, it's head and even other people's heads!...

                                                                                                                                                      Robot Controller Joystick - Medium -2D  wired joystick, Medium Robot Controller Joystick, 2 Degree Joystick, Robot  Controller, Joystick, Robot Joystick, 2 Dimension Joystick medium joystick
                                                                                                                                                      Price: $24.95
                                                                                                                                                      Availability: In Stock
                                                                                                                                                      OMTER Electronic Item #: OE-OM204 -

                                                                                                                                                        Are you ready to graduate up from thumb joysticks for your next robot controller? Then pick up the Medium Robot Controller Joystick -2D and get controlling! Like most joysticks, this one uses 2 potentiometers to measure the current angles of the joystick. Each potentiometer comes pre-wired and has a 3-pin female connector, perfect for connecting to header pins on your next project. Each potentiometer comes pre-wired and has a 3-pin female connector, perfect for connecting to header pins on...

                                                                                                                                                        RobotGeek LCD w/ Mount RobotGeek LCD w/ Mount
                                                                                                                                                        Price: $7.95-$12.95
                                                                                                                                                        Availability: In Stock
                                                                                                                                                        RobotGeek Item #: ASM-RG-LCD -

                                                                                                                                                          The RobotGeek LCD is a fast and easy way to add text output to your projects. The enclosure can float freely on your desk or be mounted to projects and Workbenches. The bottom has the standard RobotGeek 1cm X 1cm grid making all RobotGeek products compatible with each other.

                                                                                                                                                          Sabertooth Dual 60A Motor Driver Sabertooth Dual 60A Motor Driver
                                                                                                                                                          Price: $189.99
                                                                                                                                                          Availability: Back Order
                                                                                                                                                          Dimension Engineering Item #: DE-Sabertooth2X60 -

                                                                                                                                                            The Sabertooth 2X60 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for high powered robots - up to 120lbs in combat or up to 1000lbs for general purpose robotics.  Out of the box, the Sabertooth can supply two DC brushed motors with up to 60A each. Peak currents of 120A per channel are achievable for a few seconds.  Overcurrent and thermal protection means you'll never have to worry about killing the driver with...

                                                                                                                                                            Sensor Y Cable - 100mm sensor Y cable, sensor splitter cable, servo y cable, servo splitter cable
                                                                                                                                                            Price: $1.95
                                                                                                                                                            Availability: In Stock
                                                                                                                                                            Goodwell Electrical Item #: CBL-3PF2Y -

                                                                                                                                                              The Sensor Y Cable is a great tool for splitting a single signal to multiple output boards. These cables are 100mm long and use a standard .1"/2.54mm pitch, making them compatible with RobotGeek I/O boards, Hobby servos, and breadboards. With this cable you can easily connect from a single output port on the RobotGeek Sensor Shield to a RobotGeek Relay, a RobotGeek LED Driver or a RobotGeek Buzzer. Combine this cable with 2 3-Pin Couplers to easily connect from 1 port to 2 Hobby Servos. You...

                                                                                                                                                              SoftPot Linear Potentiometer - 200mm
                                                                                                                                                              Price: $17.95
                                                                                                                                                              Availability: In Stock
                                                                                                                                                              SparkFun Item #: S-20-SEN-08679 -

                                                                                                                                                                These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. --> Unit comes with...

                                                                                                                                                                SyRen 25A regenerative motor driver
                                                                                                                                                                Price: $74.99
                                                                                                                                                                Availability: In Stock
                                                                                                                                                                Dimension Engineering Item #: C-100-DC-SYREN25 -

                                                                                                                                                                  Product Description The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. It is suitable for medium powered robots - up to 50lbs in combat or 180lbs for general purpose robotics. Out of the box, the SyRen 25 can supply a single DC brushed motor with up to 25A continuously. Peak currents of 45A are achievable for a few seconds. Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls...

                                                                                                                                                                  USB 2 Serial Converter Front View
                                                                                                                                                                  Price: $13.75
                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                  Magyc Inc. Item #: MG-A000059 -

                                                                                                                                                                    The original Arduino board has spawned dozens of variations and from the Arduino Mini to the Arduino Lilypad, there is a huge selection to choose from. But not all of these boards have a direct USB connection, leaving it up to you to figure out the best way to connect your new board to your computer. That's where the USB 2 Serial Converter comes in. This board converts a USB connection into a 5 volt Serial TX and RX that you can connect straight to the Arduino Mini, Arduino Ethernet or other...

                                                                                                                                                                    Bioloid Frame FP04 F53 4-Pack Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set, FP04, F53
                                                                                                                                                                    Price: $3.95
                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                    Robotis Co. Item #: RO-903-0180-000 -

                                                                                                                                                                      Bioloid FP04-F53 Frame Set 4-Pack, used in the Bioloid Premium Robot Kit. Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                                                                      Bioloid Frame FP04 F54 4-Pack Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set, FP04, F54
                                                                                                                                                                      Price: $3.95
                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                      Robotis Co. Item #: RO-903-0181-000 -

                                                                                                                                                                        Bioloid FP04-F54 Frame Set 4-Pack, used in the Bioloid Premium Robot Kit. Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                                                                        Bioloid Frame FP04 F55 Cable Holder 20-Pack Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set, FP04, F55, Cable, Holder
                                                                                                                                                                        Price: $5.95
                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                        Robotis Co. Item #: RO-903-0182-000 -

                                                                                                                                                                          Bioloid FP04-F55 Cable Holder 20-Pack, used in the Bioloid Premium Robot Kit. Perfect for tidying up your next Dynamixel project's cables and keeping them from being pinched in robot joints! Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                                                                          1-8S LiPo Battery Voltage Tester/Monitor LiPo Battery Tester, LiPo Battery Monitor, Battery Monitor, 1-8s
                                                                                                                                                                          Price: $12.95
                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                          KoKo Technology Ltd Item #: VOLT-TESTER -

                                                                                                                                                                            Managing your LiPo battery is a must. If you let your battery get to low you can diminish the capacity of your battery or even render it unusable. That's where our 1-8S LiPo Battery Voltage Tester/Monitor comes in. First, this unit can be used to test your battery's voltage. It will display the total voltage of your battery, then cycle through and display the voltage of each individual cell. Secondly, the unit will monitor your battery and sound an alarm when one if its cells falls below a...

                                                                                                                                                                            Bioloid Skin FP04 F56/F57/F58/F59 Set Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set, Bioloid Skin FP04 F56/F57/F58/F59 Set
                                                                                                                                                                            Price: $19.95
                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                            Robotis Co. Item #: RO-903-0183-000 -

                                                                                                                                                                              Bioloid Skin FP04 F56/F57/F58/F59 Set, used in the Bioloid Premium Robot Kit. Comes with mounting screws and hardware. Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                                                                              Balance Charger for 7.4-11.V 2-3S Cells Li-Po Battery
                                                                                                                                                                              Price: $15.95-$26.90
                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                              KoKo Technology Ltd Item #: CHG-LIPO -

                                                                                                                                                                                One of the keys to keeping your LiPo batteries healthy is to charge it correctly. You can do just that with our Mini Balance Charger. This unit can charge both 3-cell(11.1V) and 2-cell(7.4V) batteries. Most LiPo Batteries consist of multiple cells connected together. As you use the battery, the cells can discharge at different rates, reducing the efficiency and capacity of your battery. Balance Charging is a way to charge your battery while monitoring each individual cell, so that all the...

                                                                                                                                                                                7v5A Power Supply
                                                                                                                                                                                Price: $11.95
                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                Item #: POW-7v5A -

                                                                                                                                                                                  7VDC, 5 Amp Power Supply for general project use. Center Positive Polarity, 5.5x2.1MM barrel jack.

                                                                                                                                                                                  8 Inch FlexiForce 0-100 lbs. Resistive Force Sensor Kit flexiforce, flexi force, FSR, force sensing resistor, load sensor, force sensor, piezoresistive force sensor, resistive force sensor, thin film resistive force sensor
                                                                                                                                                                                  Price: $34.95
                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                  Tekscan Inc. Item #: KIT-S-20-1000-FS100LB-KT -

                                                                                                                                                                                    This kit includes the following: (1) 0-100 lbs FlexiForce Force Sensor (1) Phidget Flexiforce Adapter This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line, follow this link. Getting Started with Phidgets Phidgets Documentation: Manuals, data sheets, and tutorials for Phidgets products....

                                                                                                                                                                                    Bioloid Bushing Hub & Washer Set (10 pack) Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                                                                                                                                    Price: $4.99-$5.99
                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                    Robotis Co. Item #: M-300-B-BPF-WA-BU -

                                                                                                                                                                                      Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                                                                                      Gear Motor w/ Wheel Set gear motor wheel set, gear motor,RG90 Gear Motor, MOT-VIB08, Gear Motor, gearmotor, 6v gearmotor, 90rpm, 1:120, Arduino Motor, Robot Motor
                                                                                                                                                                                      Price: $18.50
                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                      RobotGeek Item #: ASM-GM-WHL-SET -

                                                                                                                                                                                        This kit is a combination of two RG 90 Gear Motors and two matching Gear Motor Wheels.The variety of mounting holes on the gear motors will make them easy to mount to almost any chassis. With a weight of 18g, this set is a great choice for small robots and rovers.

                                                                                                                                                                                        Phidget Analog 4-Output Phidget, Analog, 4, Output, Phidgets
                                                                                                                                                                                        Price: $90.00
                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                        Phidgets Inc Item #: PH-1002 -

                                                                                                                                                                                          Product Features Produces a set voltage from -10V to +10V Current up to ±20mA per channel You can connect up to 4 devices Can be used to control LED and Fluorescent Dimmers, Valve Actuators, Motor Controls. Connects directly to a computer's USB Port Product Description The PhidgetAnalog 4-Output Produces a voltage over -10V to +10V. This voltage will be asserted up to +-20mA. An error will be reported when this current is exceeded, and the voltage the customer is getting is no longer accurate....

                                                                                                                                                                                          Phidgets InterfaceKit 2/2/2 phidgets, PhidgetInterfaceKit 2/2/2, Phidget 2/2/2, phidget 222, phidgets 222, Phidgets 2/2/2
                                                                                                                                                                                          Price: $50.00
                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                          Phidgets Inc Item #: PH-1011 -

                                                                                                                                                                                            Product Features Dongle Size 2 Analog Inputs with configurable data acquisition rates 2 Digital Inputs with hardware noise filtering 2 Digital Outputs Plugs directly into a computer's USB Port Product Description Designed for customers who only need a couple of Analog Inputs, Digital Inputs or Digital Outputs, the dongle size PhidgetInterfaceKit 2/2/2 is ideal for projects where space is critical. To keep the board small, we have removed the connectors from the board and brought them out...

                                                                                                                                                                                            Phidgets InterfaceKit 8/8/8 phidgets, PhidgetInterfaceKit 8/8/8, Phidget 8/8/8, phidget 888, phidgets 888, Phidgets 8/8/8
                                                                                                                                                                                            Price: $80.00
                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                            Phidgets Inc Item #: PH-1018 -

                                                                                                                                                                                              The PhidgetInterfaceKit 8/8/8 provides: 8 Analog Inputs 8 Digital Inputs 8 Digital Outputs The Analog Inputs are used to measure continuous quantities, such as temperature, humidity, position, pressure, etc. Phidgets offers a wide variety of sensors that can be plugged directly into the board using the cable included with the sensor.  The Analog Input can measure a voltage between 0V and 5V. The analog measurement is represented in the software as a value between 0 and 1000, so a sensor...

                                                                                                                                                                                              Phidgets InterfaceKit 8/8/8 Mini-Format phidgets, PhidgetInterfaceKit 8/8/8, Phidget 8/8/8, phidget 888, phidgets 888, Phidgets 8/8/8, Mini, Format
                                                                                                                                                                                              Price: $80.00
                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                              Phidgets Inc Item #: PH-1010 -

                                                                                                                                                                                                Product Description Provides the full functionality of the 8/8/8 I/O board in a small DIP-36 package that is plugged in your own board. If you want the 8/8/8 functionality but space is an issue, or you are building a number of units and want to eliminate wiring between boards, this is the way to go. You can create a smaller system by integrating custom electronics into your PCB, and by only using connectors for the wiring required in your system. Eliminating or reducing wiring also helps...

                                                                                                                                                                                                Phidgets Thermocouple Adapter PhidgetSensor Thermocouple Adapter, Phidget Thermocouple, Phidgets Thermocouple, Phidgets Temerature sensor, Adapter
                                                                                                                                                                                                Price: $7.50
                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                Phidgets Inc Item #: PH-3106 -

                                                                                                                                                                                                  Product Features Adapter for the Omega K-Type Miniature Male Connector Thermocouples. Product Description The thermocouple adapter lets you connect an Omega K-type Thermocouple with Miniature Male Connector to the: 1051 - PhidgetTemperatureSensor 1-Input Note: On the 1051, connect the white adapter wire to (-) terminal block and the Red wire to the + terminal block. On the 1048, connect the white wire to G and the red wire to input terminal block (numbered 0 to 3). Product Specifications...

                                                                                                                                                                                                  Phidgets Thermocouple Sensor PhidgetSensor Thermocouple, Phidget Thermocouple, Phidgets Thermocouple, Phidgets Temerature sensor
                                                                                                                                                                                                  Price: $60.00
                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                  Phidgets Inc Item #: PH-1051 -

                                                                                                                                                                                                    This is a great USB interface to a K-type thermocouple. K-type thermocouples can be used to measure -200 to +1200 degrees Celsius (-328 to 2192 degrees Fahrenheit).  The thermocouple probe is not included. Adaptors are available here Buy our K-type thermocouple and Thermocouple adapter. --> This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and...

                                                                                                                                                                                                    Pixy cam front perspective photo
                                                                                                                                                                                                    Price: $89.95
                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                    Item #: ASM-PIXY-CAM -

                                                                                                                                                                                                      Vision Processing is a lot of work - even low resolution camera can output lots of data, and parsing through that data can be a lot of work. But don't worry, the CMUcam5 Pixy is here! The Pixy is a vision sensor that can quickly track colored objects and report back their X/Y position to your Arduino or other microcontroller. The Arduino can then take that data and control motors and other devices based on the position of the tracked objects. Add the Pixy to one of our Crawlers, Rovers,Turrets...

                                                                                                                                                                                                      Plastic Project Box and Mouting Hardware arduino project box, arduino box, arduino weather proof box, arduino water proof box, water proof arduino box, weather proof arduino box
                                                                                                                                                                                                      Price: $8.95
                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                      RobotGeek Item #: ASM-PRBOX -

                                                                                                                                                                                                        The Project Box for Arduino is a great starter enclosure for your Arduino. This waterproof box can be used for logging purposes, or you can drill/paint/cut apart the box to suit whatever your needs are! A special mounting plate allows you to mount your Arduino and a shield in a variety of orientations with ease.

                                                                                                                                                                                                        SoftPot Linear Potentiometer - 500mm
                                                                                                                                                                                                        Price: $25.95
                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                        SparkFun Item #: S-20-SEN-08681 -

                                                                                                                                                                                                          These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. Unit comes with adhesive...

                                                                                                                                                                                                          Squid Cable
                                                                                                                                                                                                          Price: $4.95
                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                          RobotGeek Item #: CBL-SQUID -

                                                                                                                                                                                                            Sometimes you need to hook a servo or a sensor directly to your Arduino, or minimize the mess of jumper wires on your breadboard. These Squid Sensor Cables - 10 pack will help you do just that! On one end, you have a standard 3-pin connector (.1"/2.54mm pitch), and on the other end you have 3 single female jumper wires. You can easily position each cable exactly where you need it. and are 200mm in length. Add some 3-Pin Couplers to attach these cables directly to a servo or your arduino. These...

                                                                                                                                                                                                            XBee Explorer Regulated
                                                                                                                                                                                                            Price: $9.95
                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                            SparkFun Item #: SF-WRL-09132 -

                                                                                                                                                                                                              The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. The board was conveniently designed to mate directly with Arduino Pro boards and with the FTDI Basic boards for wireless bootloading and USB based configuration. This board is perfect for adding Xbee communication to your robot as it...

                                                                                                                                                                                                              3-Pin Couplers
                                                                                                                                                                                                              Price: $2.95
                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                              Palyoo Industrial LTD Item #: S-200-3P-Coupler-25pack -

                                                                                                                                                                                                                You can use these 3 pin couplers to connect 3 pin jumper wires together and create your own extension wires. This is perfect for extending analog sensors or servos! You can also use them to make modular connectors on your breadboard/protoboard so that connecting to other components is even easier. The pins on these couplers are spaced at .1"/2.54mm, so they're compatible with Electronic Brick/Phidgets sensor cables, hobby servo cables, and most breadboards/protoboard. They are NOT compatible...

                                                                                                                                                                                                                4 Inch FlexiForce 0-1 lbs. Resistive Force Sensor flexiforce, flexi force, FSR, force sensing resistor, load sensor, force sensor, piezoresistive force sensor, resistive force sensor, thin film resistive force sensor
                                                                                                                                                                                                                Price: $24.95
                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                Tekscan Inc. Item #: TI-FS1LB-4inch -

                                                                                                                                                                                                                  1-Pound FlexiForce Force Sensor Measures from 0 to 1 lbs. FlexiForce Sensor Model A201.   FlexiForce is... A versatile, durable piezoresistive force sensor that can be made in a variety of shapes and sizes A piezoresistive sensing device in which resistance is inversely proportional to applied force A customizable, economical force measurement tool that is easily integrated into OEM products A patented, ultra-thin (0.008"), flexible printed circuit that senses contact force A force...

                                                                                                                                                                                                                  9mm Push Button with Jumper Wires 9mm push buttom with jumpers, 9mm push buttom, red push button, push button with jumpers, button with jumper cables,
                                                                                                                                                                                                                  Price: $1.95
                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                  Goodwell Electrical Item #: ASM-RG-JBUTTON -

                                                                                                                                                                                                                    The 9mm Push Button with Jumper Wires is great for any enclosure projects that need a panel mount push button. The button is an SPST button with two 30cm female jumper wires- plug them straight into your project, or snip them off!Each button includes a mounting plate and all necessary hardware to mount to any RobotGeek product that has a centimeter grid pattern.

                                                                                                                                                                                                                    Bioloid Bolt & Nut Set Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
                                                                                                                                                                                                                    Price: $23.40
                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                    Robotis Co. Item #: RO-903-0055-000 -

                                                                                                                                                                                                                      S1 [PHS M2*6] : 400 pcs S2 [PHS M2*8] : 20 pcs S3 [PHS M2*10] : 20pcs  S4 [PHS M2*12] : 20pcs S5 [[PHS M2*16] : 20pcs S6 [PHS M2*20] : 20pcs S7 [PHS M2*25] : 20pcs  S8 [PHS M2*30] : 20pcs  SP1 [SPACER M2*4] : 4pcs SP2 [SPACER M2*6] : 4pcs N1 [NUT M2] : 400pcs N2 [NUT M3] : 10pcs SB [PHS M3*10] : 30pcs BU [BUSHING-F] : 20pcs WA [SPACER-BU] : 20pcs Projects Using the AX-12 Dynamixel Servos & Brackets Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                                                                                                                      Mini Turbo Fan Mini Turbo Fan
                                                                                                                                                                                                                      Price: $13.95
                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                      Maxx Products Item #: MP-EPF200 -

                                                                                                                                                                                                                        The Mini Turbo Fan is a Mini Badass. Sporting 73g of thrust while weighing in at only 30g it can take off if you give it full throttle. Perfect for fire fighting robots or cooling you on hot summer days. The Mini Turbo Fan comes with a heat sink and 4" cable with male ends. To extend the cable we recommend using our 2-pin F/F jumper cable. *The fan edges may rub against the duct walls when you first run it. This is okay. The blades will actually trim themselves down. That is how badass this...

                                                                                                                                                                                                                        Phidgets InterfaceKit 8/8/8 - plus 6 Port Hub phidgets, PhidgetInterfaceKit 8/8/8 plus 6 Port Hub, Phidget 8/8/8 plus 6 Port Hub, phidget 888, phidgets 888
                                                                                                                                                                                                                        Price: $125.00
                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                        Phidgets Inc Item #: PH-1019 -

                                                                                                                                                                                                                          The PhidgetInterfaceKit 8/8/8 with 6 Port USB Hub provides: * 8 Analog Inputs * 8 Digital Inputs with hardware noise filtering * 8 Digital Outputs * On-board powered 6-port full-speed (12Mbit/s) USB hub The Analog Inputs are used to measure continuous quantities, such as temperature, humidity, position, pressure, etc. Phidgets offers a wide variety of sensors that can be plugged directly into the board using the cable included with the sensor. The Digital Inputs have a Digital Input Hardware...

                                                                                                                                                                                                                          12V 2A DC Power Supply
                                                                                                                                                                                                                          Price: $10.95
                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                          Top Power Co Item #: POW-12v2a -

                                                                                                                                                                                                                            Power Supply for general project use. North American Style Plug 12VDC, 2 Amp, Center Positive Polarity, 5.5x2.1MM PS - You might want one of these too.

                                                                                                                                                                                                                            Sabertooth dual 12A motor driver
                                                                                                                                                                                                                            Price: $79.99
                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                            Dimension Engineering Item #: C-100-DC-2x12 -

                                                                                                                                                                                                                              Product Description The Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for medium powered robots - up to 30lbs in combat or 100lbs for general purpose robotics.  Out of the box, the Sabertooth can supply two DC brushed motors with up to 12A each. Peak currents of 25A are achievable for a few seconds.  Overcurrent and thermal protection means you'll never have to worry about killing the driver with...

                                                                                                                                                                                                                              Sabertooth dual 12A motor driver for R/C
                                                                                                                                                                                                                              Price: $64.99
                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                              Dimension Engineering Item #: C-100-DC-2x12RC -

                                                                                                                                                                                                                                Sabertooth 2X12 R/C is a dual motor driver specifically optimized for use in radio controlled vehicles. It is suitable for medium powered robots, cars and boats. The Sabertooth 2x12 R/C replaces our 2x10 RC controller. Out of the box, it can supply two DC brushed motors with up to 12A each. Peak currents of 25A are achievable for a few seconds. Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor....

                                                                                                                                                                                                                                Treasure Project Box project box, arduino project box, rfid project box, rfiduino project box, treasure chest box, treasure box, treasure project box
                                                                                                                                                                                                                                Price: $9.95
                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                RobotGeek Item #: RW-WBOX -

                                                                                                                                                                                                                                  Sometimes a regular project box just isn’t enough. You need some flash, some mystery, some style. We understand, we felt the same way. We had these wooden treasure boxes special made for a few of our own projects and now you can DIY in style too. Why make your project in a plain box when you can make it look like a mysterious magic box bought in a dangerous back alley in some remote corner of the world? Time to step up your DIY game. We recommend using our Panel Mount Dual Power Cable with the...

                                                                                                                                                                                                                                  Phidgets Touch Sensor Phidgets Touch Sensor, Phidget Touch Sensor, Phidgets Analog Touch Sensor, Analog Touch Sensor
                                                                                                                                                                                                                                  Price: $11.00
                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                  Phidgets Inc Item #: PH-1129 -

                                                                                                                                                                                                                                    Phidget Touch Sensor The 1129 is a capacitive touch sensor and can detect a touch through plastic, glass, or paper. We recommend a material thickness of up to 1/2”. The sensor can work as a close proximity sensor, sensing objects at a distance of up to 1/2” from the board in all directions without direct contact. On the bottom side of the Touch Sensor there is a small exposed metallic pad. A soldered connection can be made to the pad to increase the size and dimensions of the touchable area,...

                                                                                                                                                                                                                                    Phidgets Linear Touch Sensor Phidgets Linear Touch Sensor, PhidgetLinearTouch, PhidgetLinearTouch sensor, Phidget Linear Touch Sensor
                                                                                                                                                                                                                                    Price: $40.00
                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                    Phidgets Inc Item #: PH-1015 -

                                                                                                                                                                                                                                      The PhidgetLinearTouch detects changes in the capacitance between the on-board electrodes and the object making contact. The side of the circuit board opposite the connector and components is the side intended for contact. The 1015 can be mounted behind a sheet of glass or plastic; The recommended thickness is 1/8 inch. Use Silicon adhesive when attaching the Phidget to the material; standing the PhidgetLinearTouch off or creating space between the separation material and the Phidget can cause...

                                                                                                                                                                                                                                      Getting Started with Arduino Book, 2nd Edition Getting Started with Arduino, Arduino, DIY, Book
                                                                                                                                                                                                                                      Price: $12.99
                                                                                                                                                                                                                                      Availability: Back Order
                                                                                                                                                                                                                                      Maker SHED Item #: C-400-GSA-Book -

                                                                                                                                                                                                                                        This valuable little book offers a thorough introduction to the open-source electronics prototyping platform that's taking the design and hobbyist world by storm. Getting Started with Arduino gives you lots of ideas for Arduino projects and helps you get going on them right away. From getting organized to putting the final touches on your prototype, all the information you need is right in the book. Inside, you'll learn about: Interaction design and physical computing The Arduino hardware and...

                                                                                                                                                                                                                                        Phidgets Circular Touch Sensor Phidgets Circular Touch Sensor, Phidget Circular Touch Sensor, phidget touch sensor, ipod touch sensor, ipod circular sensor
                                                                                                                                                                                                                                        Price: $40.00
                                                                                                                                                                                                                                        Availability: Back Order
                                                                                                                                                                                                                                        Phidgets Inc Item #: PH-1016 -

                                                                                                                                                                                                                                          The PhidgetCircularTouch detects changes in the capacitance between the on-board electrodes and the object making contact. The side of the circuit board opposite the connector and components is the side intended for contact. The 1016 can be mounted behind a sheet of glass or plastic; The recommended thickness is 1/8 inch. Use Silicon adhesive when attaching the Phidget to the material; standing the PhidgetCircularTouch off or creating space between the separation material and the Phidget can...

                                                                                                                                                                                                                                          4 Pin Sensor Cable 300mm 4 pin sensor cable, 4pin sensor cable, lcd sensor cable, lcd cable, 4pin cable, 4 pin cable, sensor cable
                                                                                                                                                                                                                                          Price: $1.95
                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                          Goodwell Electrical Item #: CBL-4PINSEN -

                                                                                                                                                                                                                                            This standard 4 Pin Sensor Cable is 30cm long and has a .1"/2.54mm pitch, making it compatible with 4-pin sensors and shields. You can also add Pin Couplers and attach the cable to breadboards.

                                                                                                                                                                                                                                            BIOLOID FR04-Gripper Set BIOLOID FR04-Gripper Set, Gripper set, BIOLOID, Robot Gripper
                                                                                                                                                                                                                                            Price: $62.20
                                                                                                                                                                                                                                            Availability: Back Order
                                                                                                                                                                                                                                            Robotis Co. Item #: RO-903-0188-000 -

                                                                                                                                                                                                                                              Designed to work with the AX-Series DYNAMIXEL devices, the BIOLOID FR04-Gripper Set will get your humanoid or robotic arm gripping and picking objects up in no time. The included hardware makes it a snap to install this gripper frame on the compatible DYNAMIXEL devices. NOTE: This set contains a single gripper - no servos or BIOLOID kits are included. Set Includes: FR04-E170 (Gunmetal) FR04-E171 (Gunmetal) Washer : 4 pcs Bushing : 2 pcs Bolt PHS M2*6 : 20 pcs Bolt PHS M3*10 : 2 pcs Nut M2 : 10...

                                                                                                                                                                                                                                              Grove - BLE
                                                                                                                                                                                                                                              Price: $19.80
                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                              Seeed Studio Item #: SS-811007001 -

                                                                                                                                                                                                                                                This Grove - BLE utilizes an HM-11 module to provide your Arduino/Seeeduino with serial BLE function, and it can be used with Arduino/Seeeduino very conveniently if using with Base Shield together. With support for a BLE ComAssistant APK, this Grove - BLE can talk to your mobile phone more easily without pairing, and of course, it can be set via AT commands directly. You can use it in many conditions, like robot controls or remote control equipment ,etc. We prepared an easy and convenient...

                                                                                                                                                                                                                                                LED - RGB Addressable, PTH, 8mm (5 Pack)
                                                                                                                                                                                                                                                Price: $2.95
                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                SparkFun Item #: SF-COM-12877 -

                                                                                                                                                                                                                                                  We know this looks like a lot of our other LEDs, but it’s not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin, except it is a lot simpler to solder into your project and is in a diffused 8mm package. This RGB LED has the control IC moved into the actual LED, so we wanted to offer this amazing product to you! They’re great when you need a lot of color from not a lot of board space, now more so than...

                                                                                                                                                                                                                                                  NeoPixel Jewel - 7 x WS2812 5050 RGB LED with Integrated Drivers neopixel, led, jewel, 7, 5050, rgb, driver
                                                                                                                                                                                                                                                  Price: $5.95
                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                  Adafruit Item #: AF-2226 -

                                                                                                                                                                                                                                                    The NeoPixel Jewel is a lovely round PCB, home to 7 tiny WS2812 5050 (5mm x 5mm) smart RGB LEDs. Each LED has a driver chip built into it, making them individually addressable. Many units can be chained together and run by a single microcontroller by connecting the output of one Jewel into the input of another! Each NeoPixel has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and runs on 5V.

                                                                                                                                                                                                                                                    NeoPixel Ring - 16 x WS2812 5050 RGB LED
                                                                                                                                                                                                                                                    Retail: $9.95
                                                                                                                                                                                                                                                    Price: $8.48
                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                    SparkFun Item #: SF-COM-12664 -

                                                                                                                                                                                                                                                      NeoPixel Stick - 8 x WS2812 5050 RGB LED
                                                                                                                                                                                                                                                      Price: $5.95
                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                      SparkFun Item #: SF-COM-12661 -

                                                                                                                                                                                                                                                        This is the NeoPixel Stick from Adafruit, a small chainable board with eight 5050 WS2812 RGB LEDs. The WS2812s are each addressable as the driver chip is located inside the LED. Each NeoPixel Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires 5V. Every stick is equipped with a single data line with a very timing-specific protocol requiring a real-time microconroller with a 8MHz or faster processor such as an AVR, Arduino, PIC,...

                                                                                                                                                                                                                                                        Power Supply 12V - 5A (2.1mm Jack) Power Supply 12VDC 5.0A - US
                                                                                                                                                                                                                                                        Price: $19.95
                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                        Top Power Co Item #: POW-12v5a -

                                                                                                                                                                                                                                                          Power Supply for general project use. North American Style Plug 12VDC, 5 Amp, Center Positive Polarity, 5.5x2.1MM PS - You might want one of these too.

                                                                                                                                                                                                                                                          RobotGeek Pushbutton arduino pushbutton, arduino button, arduino button board, arduino digital button
                                                                                                                                                                                                                                                          Price: $2.95
                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                          RobotGeek Item #: ASM-RG-PUSHBUTTON -

                                                                                                                                                                                                                                                            The RobotGeek Pushbutton is a self-contained Arduino Button board that makes it easy to add a pushbutton to your Arduino Project. This RobotGeek Pushbutton has a built in pull-down resistor, so the signal can be read as a digital input from your Arduino or other microcontroller. This Arduino Button Board has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running immediatly. As with all RobotGeek sensors, the hole mounting...

                                                                                                                                                                                                                                                            RobotGeek 12v Mini Self-Priming Pump
                                                                                                                                                                                                                                                            Price: $17.95
                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                            RobotGeek Item #: RG-SMPUMP -

                                                                                                                                                                                                                                                              If you are looking for an Arduino Pump the RobotGeek small liquid and air pump is a great solution. This pump is self priming so it can be used for projects involving plant watering, suction, drainage, drink dispensing, barbots, and more. To use this for an Arduino Pump project all you need is a RobotGeek Relay and seperate power supply. The pump can operate at either 6 or 12 volts and packs a punch in a small package! Recommended Arduino Pump Tutorials: Arduino ShotBot Project Arduino Pump...

                                                                                                                                                                                                                                                              RobotGeek Servo Side Bracket robotgeek servo side bracket, servo side bracket, side bracket, rg side bracket, side bracket
                                                                                                                                                                                                                                                              Price: $4.95
                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                              RobotGeek Item #: HW-SBRACKET -

                                                                                                                                                                                                                                                                The RobotGeek Servo Side Bracket is the perfect way to mount your RobotGeek Servo to other servos and your Robot. The side bracket can attach to 5 different positions on the servo rail to make it easy to configure your robot the way you want it. The circular hole pattern on the bottom of the bracket will also attach directly to a RobotGeek Servo Horn or other brackets, allowing you to easily build up complex servo systems. RobotGeek Servo Side Bracket by RobotGeek on Sketchfab ...

                                                                                                                                                                                                                                                                WS2812 RGB LED Breakout
                                                                                                                                                                                                                                                                Price: $2.95
                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                SparkFun Item #: SF-BOB-11820 -

                                                                                                                                                                                                                                                                  This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding. Several of these breakouts can be chained together to form a display or an addressable string.

                                                                                                                                                                                                                                                                  Xbee Adapter Breakout Board Xbee, Breakout, Board, Adapter, Wireless, Robot Communication, Interface
                                                                                                                                                                                                                                                                  Price: $3.99
                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                  Parallax Item #: PX-32403 -

                                                                                                                                                                                                                                                                    This low cost XBee Adapter Board comes in a kit form and provides a cost-effective solution to interfacing to any XBee or XBee Pro module. By using this adapter board you can provide an easy interface to the XBee or XBee Pro modules by converting the 2mm pin spacing to breadboard friendly 0.100” spacing. The adapter boards also provide a means to connect pluggable wires or solder connections and also provide mounting holes.   Features: Converts XBee 2mm pin spacing to 0.100" pin spacing...

                                                                                                                                                                                                                                                                    AX-12A Gear Set AX-12A Gear set, Bioloid Gear set, AX-18A gear set, AX-12 gears, AX-18 gears
                                                                                                                                                                                                                                                                    Price: $5.90
                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                    Robotis Co. Item #: RO-903-0087-001 -

                                                                                                                                                                                                                                                                      Are you having problems with your DYNAMIXEL AX-12A because of worn out gears? The AX-12A Gear Set will get your AX-12 servos functioning in no time! Check out the video below to see how easy it is to replace your gears. Includes: AX-12A Gear #1(plastic) : 1 piece AX-12A Gear #2(plastic) : 1 piece AX-12A Gear #3(plastic) : 1 piece AX-12A Gear #4(plastic) : 1 piece AX-12A Wheel Gear(plastic): 1 piece Exclusive Grease: 1 piece NOTE:These gears are NOT compatible with AX-12+/AX-18F/AX-18A...

                                                                                                                                                                                                                                                                      AX-18A Gear Set AX-12A Gear set, Bioloid Gear set, AX-18A gear set, AX-12 gears, AX-18 gears
                                                                                                                                                                                                                                                                      Price: $9.90
                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                      Robotis Co. Item #: RO-903-0184-001 -

                                                                                                                                                                                                                                                                        Are you having problems with your DYNAMIXEL AX-18A because of worn out gears? The AX-18A Gear Set will get your AX-18 servos functioning in no time! Check out the video below to see how easy it is to replace your gears. Includes: AX-18A Gear #1(plastic) : 1 piece AX-18A Gear #2(plastic) : 1 piece AX-18A Gear #3(plastic) : 1 piece AX-18A Gear #4(aluminum) : 1 piece AX-18A Wheel Gear(plastic): 1 piece Exclusive Grease: 1 piece NOTE:These gears are NOT compatible with AX-12+/AX-18F...

                                                                                                                                                                                                                                                                        FR07-B101K Back Frame Set RX-28, Bracket, Frame, FR07-B101K, Robotis, Dynamixel, RX-24F, Back, MX-28
                                                                                                                                                                                                                                                                        Price: $29.90
                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                        Robotis Co. Item #: RO-903-0161-100 -

                                                                                                                                                                                                                                                                          The FR07-B101K Back Frame Set provides a mounting pattern on the side or bottom of RX-24F , RX-28 and MX-28 DYNAMIXEL servos. It is used in a wide variety of applications and is generally mounted on the rear side of the DYNAMIXEL. Kit Contents:1 x FR07-B101K (Black)8 x M2.5*6 Bolts

                                                                                                                                                                                                                                                                          Phidgets Rotation Sensor Phidget Rotation Sensor, Phidget Rotational Sensor, Phidgets Rotation Sensor, Phidgets Rotational Sensor, Rotation sensor, HCI knob
                                                                                                                                                                                                                                                                          Price: $6.89
                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                          Phidgets Inc Item #: PH-1109 -

                                                                                                                                                                                                                                                                            Rotation sensor, 24 Inch cable included. This sensor rotates 300 Degrees.  The output voltage increases as the potentiometer is turned counterclockwise. Board Dimensions: 3.3 x 3.0 cmMounting Holes: 2.5 x 2.3 cm This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line, follow this link....

                                                                                                                                                                                                                                                                            FR07-S101K Side Frame Set RX-24F, RX-28, FR07-S101K, Frame, Set, Robotis, Dynamixel, MX-28
                                                                                                                                                                                                                                                                            Price: $11.90
                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                            Robotis Co. Item #: RO-903-0160-100 -

                                                                                                                                                                                                                                                                              The FR07-S101K Side Frame Set provides a mounting pattern on the side or bottom of RX-24F , RX-28 and MX-28 DYNAMIXEL servos. It is used in a wide variety of applications and is generally used to connect one or more Dynamixels together via other Frame Sets. Kit Contents: 1 x FR07-S101K (Black) 8 x M2.5*6 Bolts 4 x M2.5 Nuts

                                                                                                                                                                                                                                                                              FR07-H101K Hinge Frame Set Bracket, RX-24F, RX-28, FR07-H101K, Hinge, Frame, Set, Robotis, Dynamixel, MX-28
                                                                                                                                                                                                                                                                              Price: $27.90
                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                              Robotis Co. Item #: RO-903-0159-100 -

                                                                                                                                                                                                                                                                                The FR07-H101K Hinge Frame Set is a straight hinge frame for building joints using the RX-24F , RX-28 and MX-28 DYNAMIXELS. This kit includes the HN07-I101 Idler Kit Contents:1 x FR07-H101K (Black)1 x HN07-101 Idler1 x Bearing MF106ZZ1 x Bearing Cap4 x M2.5*6 Bolts1 x M2.5*8 Bolts10 x M2*3 Bolts ...

                                                                                                                                                                                                                                                                                FR07-X101K Cross Frame Set RX-24F, RX-28, FR07-X101K, Cross, Frame, Set, Bracket, Robotis, Dynamixel, Servo, Actuator, MX-28
                                                                                                                                                                                                                                                                                Price: $31.90
                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                Robotis Co. Item #: RO-903-0162-100 -

                                                                                                                                                                                                                                                                                  The FR07-X101K Cross Frame Set is for mounting RX-24F, RX-28 and MX-28 DYNAMIXELS. It is generally used in conjunction with the FR07-F101K Flange Bearing Frame Set Kit Contents:2 x FR07-X101K Frame4 x M2.5*6 Bolts4 x M2.5*8 Bolts4 x M2.5 Nuts Projects Using the RX-28 & RX-24 Dynamixel Servos & Brackets --> --> ...

                                                                                                                                                                                                                                                                                  12v DC Motor Pump - Full View
                                                                                                                                                                                                                                                                                  Price: $24.95
                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                  Tops Industy Item #: TI-TG-02B-DC12B -

                                                                                                                                                                                                                                                                                    If you are looking for a food safe Arduino Pump the RobotGeek Large Liquid Pump is a great solution. This pump is self priming, quiet, and can move up to 2 liters per minute. To use this for an Arduino Pump project all you need is a RobotGeek Relay and seperate power supply. The pump will work with standard aquarium tubing. The fit is a little tight, but the tubing will go on. We recommend picking up some of our food safe 3.5mm silicone tubing which fits great and goes on easier! ...

                                                                                                                                                                                                                                                                                    Parallax PING Ultrasonic Range Sensor Parallax, PING, Ultrasonic, Range, Sensor
                                                                                                                                                                                                                                                                                    Price: $29.99
                                                                                                                                                                                                                                                                                    Availability: Back Order
                                                                                                                                                                                                                                                                                    Parallax Item #: PX-28015 -

                                                                                                                                                                                                                                                                                      Parallax's PING)))™ ultrasonic sensor provides a very low-cost and easy method of distance measurement. This sensor is perfect for any number of applications that require you to perform measurements between moving or stationary objects. Naturally, robotics applications are very popular but you'll also find this product to be useful in security systems or as an infrared replacement if so desired. You will definitely appreciate the activity status LED and the economic use of just 1 I/O pin. The...

                                                                                                                                                                                                                                                                                      RobotGeek 4 Pin Sensor Squid 300m 4 pin, sensor, cable, squid, data, 300m, jumper, breakout
                                                                                                                                                                                                                                                                                      Price: $4.95
                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                      RobotGeek Item #: CBL-SQUID4P -

                                                                                                                                                                                                                                                                                        Sometimes you need to hook a serial/I2C device directly to your Arduino, or minimize the mess of jumper wires on your breadboard. These 4 Pin Sensor Squid 300m cables will help you do just that! On one end, you have a standard 4-pin connector (.1"/2.54mm pitch), and on the other end you have 4 single female jumper wires. You can easily position each cable exactly where you need it. Each cable is 300m in length. Comes in pack of 10 squid cables. Pair these cables with 2-pin couplers to adapt...

                                                                                                                                                                                                                                                                                        RobotGeek Rotation Knob arduino rotation knob, arduino rotation sensor, arduino knob sensor, arduino knob control, arduino rotation control
                                                                                                                                                                                                                                                                                        Price: $4.95
                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                        RobotGeek Item #: ASM-RG-ROTKNOB -

                                                                                                                                                                                                                                                                                          Do you need Rotation Knobs for your Arduino project? The RobotGeek Knob is good choice! It has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running immediatly. As with all RobotGeek sensors, the hole mounting pattern is on a 1x1 CM grid so they easily mount to the RobotGeek Workbenches or any other RobotGeek kit. Each sensor includes a mounting plate and all hardware needed to mount to any workbench or RobotGeek product that...

                                                                                                                                                                                                                                                                                          RobotGeek Servo C Bracket robotgeek servo c bracket, c bracket, robotgeek bracket, robotgeek servo bracket, servo bracket, servo c bracket
                                                                                                                                                                                                                                                                                          Price: $4.95
                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                          RobotGeek Item #: HW-CBRACKET -

                                                                                                                                                                                                                                                                                            The RobotGeek Servo C Bracket is a great tool for creating joints with your RobotGeek Servo. This bracket easily attaches to the servo's horns with just a few bolts. A variety of mounting holes on the bracket make it easy to mount the bracket to your robot or sensors in a variety of ways. The circular hole pattern on the bottom of the bracket will also attach directly to a RobotGeek Servo Horn or other brackets, allowing you to easily build up complex servo systems. RobotGeek Servo Hinge...

                                                                                                                                                                                                                                                                                            Variable Power Supply 15-24V 4.5A (2.1mm Jack) Variable Power Supply 15-24VDC 4.5A - US
                                                                                                                                                                                                                                                                                            Price: $24.95
                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                            Top Power Co Item #: POW-Variable -

                                                                                                                                                                                                                                                                                              Variable Power Supply for general project use. North American Style Plug 15-24VDC 4.5A - US Center Positive Polarity, 5.5x2.1MM PS - You might want one of these too.

                                                                                                                                                                                                                                                                                              FR07-F101K Flange Bearing Frame Set RX-24F, RX-28, FR07-F101K, Flange, Bearing, Set, Bracket, MX-28
                                                                                                                                                                                                                                                                                              Price: $41.90
                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                              Robotis Co. Item #: RO-903-0163-100 -

                                                                                                                                                                                                                                                                                                The FR07-F101K Flange Bearing Frame Set provides a side mounting point & Bearing Idler Hub for attaching rotational assemblies to the side of RX-24F, RX-28 and MX-28 DYNAMIXELS. It is generally used in conjunction with the FR07-X101K Cross Frame Set. Kit Contents:1 x FR07-F101K (Black)1 x FR07-S101 (Silver)1 x HN07-101 Idler1 x Bearing MF106ZZ1 x Bearing Cap8 x M2.5*6 Bolts1 x M2.5*8 Bolts18 x M2*3 Bolts4 x M2.5 Nuts ...

                                                                                                                                                                                                                                                                                                HN07-N101 Servo Horn Set RX-24F/RX-28, HN07-N101, Servo, Horn, MX-28
                                                                                                                                                                                                                                                                                                Price: $8.90
                                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                                Robotis Co. Item #: RO-903-0164-000 -

                                                                                                                                                                                                                                                                                                  The HN07-N101 Servo Horn is a servo horn set for the RX-24F, RX-28 and MX-28 DYNAMIXELS. This is the new mounting pattern which is included with all N101 series Dynamixels. It uses a 16mm diameter mounting hole pattern and comes with a thrust washer for added stability. Kit Contents:1 x HN07-N101K Horn1 x M2.5*8 Bolts10 x M2*3 Bolts1 x Thrust Washer

                                                                                                                                                                                                                                                                                                  HN07-I101 Idler Bearing Set RX-28H Bearing Set, Robotis, Dynamixel, RX-28, Bracket, Frame, bearing, RX-24F/RX-28 HN07-I101 Bearing Set, MX-28
                                                                                                                                                                                                                                                                                                  Price: $14.10
                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                  Robotis Co. Item #: RO-903-0165-000 -

                                                                                                                                                                                                                                                                                                    The HN07-I101 Idler Bearing Set provides a passive idler hub on the back side of the servo for building joints using the RX-24F, RX-28 and MX-28 DYNAMIXELS. Kit Contents:1 x HN07-I101K IdlerBearingBearing cap1 x M2.5*8 Bolts10 x M2*3 Bolts

                                                                                                                                                                                                                                                                                                    Phidgets Multi-turn Rotation Sensor Phidgets Multi-turn Rotation Sensor, Phidget Multi-turn Rotation Sensor
                                                                                                                                                                                                                                                                                                    Price: $29.00
                                                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                                                    Phidgets Inc Item #: PH-1116 -

                                                                                                                                                                                                                                                                                                      Multi-turn Rotation Sensor Multi-Turn Rotation sensor with 3600 degrees of rotation (10 full rotations). At fully clockwise the output is 5V and at fully counter clockwise the output is 0. Sensor Type: Resistive 3-Pin Board Dimensions: 3.1 x 3.7 cm Mounting Holes: 2.3 x 3.0 cm Maximum resistance of potentiometer: 200 kOhm. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of...

                                                                                                                                                                                                                                                                                                      12v10a Power Supply 12v10a Power Supply
                                                                                                                                                                                                                                                                                                      Price: $19.95
                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                      Item #: POW-12v10A -

                                                                                                                                                                                                                                                                                                        12VDC, 10 Amp Power Supply for general project use.Center Positive Polarity, 5.5x2.1MM barrel jack.

                                                                                                                                                                                                                                                                                                        140mm Slewing Bearing slewing bearing, robot slewing bearing, robot arm base bearing
                                                                                                                                                                                                                                                                                                        Price: $19.95
                                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                                        RobotGeek Item #: RW-140BEARING -

                                                                                                                                                                                                                                                                                                          The 140mm Slewing Bearing is the same bearing found in our Robotic Arms. Each bearing is made of a soft aluminum alloy and sports a single row of spherical bearings. These bearings give the bearing a silky smooth movement, perfect for assisting your robotic arm base, or just about any other moving joint. The slewing bearing goes great with the Standoff Variety Pack and the Nut and Bolt Variety Pack, giving you all the hardware you need to attach the bearing to a variety of projects. ...

                                                                                                                                                                                                                                                                                                          150mm Jumper Wires F/F (Set of 10)
                                                                                                                                                                                                                                                                                                          Price: $3.95
                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                          SparkFun Item #: AC-200-PRT08430 -

                                                                                                                                                                                                                                                                                                            These Jumper Wires F/F (Set of 10) are great for connecting male headers from one board to another. Combine them with Male Jumpers to make even longer cables! These jumpers will fit neatly into a .1" header, so they're great for bread boards. Each pack of 10 comes with cables in 5 colors. Each cable is 150mm long

                                                                                                                                                                                                                                                                                                            2-Pin Couplers
                                                                                                                                                                                                                                                                                                            Price: $2.95
                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                            Palyoo Industrial LTD Item #: S-200-2P-Coupler-25pack -

                                                                                                                                                                                                                                                                                                              You can use these 2 pin couplers to connect 2/4 pin jumper wires together and create your own extension wires. You can also use them to make modular connectors on your breadboard/protoboard so that connecting to other components is even easier. The pins on these couplers are spaced at .1"/2.54mm, so they're compatible with Electronic Brick/Phidgets sensor cables and most breadboards/protoboard. They are NOT compatible with Grove cables. ...

                                                                                                                                                                                                                                                                                                              4x AA Battery to 2.1/5.5mm DC Barrel Jack AA, Battery, 2.1, 5.5, DC, Barrel, Jack, pack, holder, 4x
                                                                                                                                                                                                                                                                                                              Price: $2.95
                                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                                              RobotGeek Item #: BAT-AAPACK -

                                                                                                                                                                                                                                                                                                                This 4x AA Battery to 2.1/5.5mm DC Barrel Jack is perfect for small mobile Arduino Projects. Just add 4 AA batteries and plug the barrel jack into your Arduino Board, and you're ready to rock! Supplies just over 6 volts of power with a fresh set of batteries, which works well with a wide variety of projects. Great for infrared, LED, or any small Arduino project you'd like to take on the go!

                                                                                                                                                                                                                                                                                                                9 Degrees of Freedom IMU Breakout - LSM9DS0
                                                                                                                                                                                                                                                                                                                Price: $29.95
                                                                                                                                                                                                                                                                                                                Availability: Back Order
                                                                                                                                                                                                                                                                                                                SparkFun Item #: SF-SEN-12636 -

                                                                                                                                                                                                                                                                                                                  This is the LSM9DS0, a versatile motion-sensing system-in-a-chip that houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. That’s right, 9 degrees of freedom (9dof) from a single IC! Each sensor in the LSM9DS0 supports a wide range of, well, ranges: the accelerometer’s scale can be set to ± 2, 4, 6, 8, or 16 g, the gyroscope supports ± 245, 500, and 2000 °/s, and the magnetometer has full-scale ranges of ± 2, 4, 8, or 12 gauss. Additionally, the LSM9DS0 includes an I2C...

                                                                                                                                                                                                                                                                                                                  CC3000 WiFi Breakout
                                                                                                                                                                                                                                                                                                                  Price: $34.95
                                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                                  SparkFun Item #: SF-WRL-12072 -

                                                                                                                                                                                                                                                                                                                    This is a breakout board for the CC3000 WiFi Module. The CC3000 from TI (Texas Instruments) is a self-contained wireless network processor that makes incorporating internet connectivity into your project simple. Instead of the more standard UART communication method, the CC3000 module utilizes an SPI interface allowing you, the user, to control the flow of data as you please. What makes the CC3000 unique is its ability to associate to a WiFi access point using a cell phone app in the Texas...

                                                                                                                                                                                                                                                                                                                    Dual VNH3SP30 Motor Driver Carrier MD03A Dual, VNH3SP30, Motor, Driver, Carrier, MD03A, DC, Controller
                                                                                                                                                                                                                                                                                                                    Price: $49.99
                                                                                                                                                                                                                                                                                                                    Availability: Back Order
                                                                                                                                                                                                                                                                                                                    Pololu Item #: PO-707 -

                                                                                                                                                                                                                                                                                                                      If you are looking to drive two high-power motors through one compact unit, these dual VNH3SP30 motor driver carriers are perfect for you. With these boards, it's easy to get a medium-sized, differential drive robot running in no time. The Pololu dual high-power motor drivers are compact carriers for the VNH3SP30 and VNH2SP30 motor driver integrated circuits from ST. The board incorporates most of the components of the typical application diagram on page 8 of the VNH2SP30 datasheet, including...

                                                                                                                                                                                                                                                                                                                      Electronic Brick - Fully Buckled 3 Wire Cable - 5 Pack
                                                                                                                                                                                                                                                                                                                      Price: $4.99
                                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                                      Seeed Studio Item #: SEEED-ELB111C5M -

                                                                                                                                                                                                                                                                                                                        5 pack of fully buckled 3 wire cables for the Electronic Brick family of products.

                                                                                                                                                                                                                                                                                                                        Grove - Line Finder Grove Line Finder, Arduino line follower, arduino line sensor
                                                                                                                                                                                                                                                                                                                        Price: $4.95
                                                                                                                                                                                                                                                                                                                        Availability: Back Order
                                                                                                                                                                                                                                                                                                                        Seeed Studio Item #: SS-SEN21177P -

                                                                                                                                                                                                                                                                                                                          The Grove Line Finder is designed for line following robots. It consists two parts - an IR emitting LED and an IR sensitive phototransistor. It outputs a digital signal to a microcontroller so the robot can reliably follow a black line on a white background, or vice versa. This Line finder even has an indicator LED and adjustable range. Product Features Grove compatible interface Compact Size 5V DC power supply Indicator LED Digital output Adjustable Range ...

                                                                                                                                                                                                                                                                                                                          Jumper Wires - Connected 6" (M/F, 20 pack)
                                                                                                                                                                                                                                                                                                                          Price: $1.95
                                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                                          SparkFun Item #: SF-PRT-12794 -

                                                                                                                                                                                                                                                                                                                            These are 6" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of 20 jumpers (colors shown). Each group of jumpers are connected to each other and can either be pulled apart in any quantity (from 1-20, of course) or kept whole based on you needs. These jumper wires can be used for pretty much everything! They work great with breadboards,...

                                                                                                                                                                                                                                                                                                                            L12 100mm 100:1 Linear Actuator Actuonix Linear Actuator, mini linear actuator, small linear actuator, small arduino linear actuator
                                                                                                                                                                                                                                                                                                                            Price: $90.00
                                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                                            Item #: FR-L12-100-100-6-I -

                                                                                                                                                                                                                                                                                                                              Actuonix mini linear actuators are excellent for DIY and Arduino mini linear actuator projects. The L12-I series can be controlled from a regular servo PWM signal as well as voltage and current signaling. The PWM control is perfect for Arduino linear actuator projects because the actuator can be controlled just like a servo using the servo library. We recommend checking out our Arduino Linear Actuator Tutorials listed below. Each linear actuator also comes with mounting hardware and end...

                                                                                                                                                                                                                                                                                                                              L12 100mm 210:1 Linear Actuator small linear actuator, mini arduino linear actuator, Actuonix Linear Actuator, micro linear actuator
                                                                                                                                                                                                                                                                                                                              Price: $90.00
                                                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                                                              Item #: FR-L12-100-210-6-I -

                                                                                                                                                                                                                                                                                                                                Actuonix mini linear actuators are excellent for DIY and Arduino mini linear actuator projects. The L12-I series can be controlled from a regular servo PWM signal as well as voltage and current signaling. The PWM control is perfect for Arduino linear actuator projects because the actuator can be controlled just like a servo using the servo library. We recommend checking out our Arduino Linear Actuator Tutorials listed below. Each linear actuator also comes with mounting hardware and end...

                                                                                                                                                                                                                                                                                                                                L12 50mm 100:1 Linear Actuator Actuonix Linear Actuator, mini linear actuator, small linear actuator, small arduino linear actuator
                                                                                                                                                                                                                                                                                                                                Price: $90.00
                                                                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                                                                Item #: FR-L12-50-100-6-I -

                                                                                                                                                                                                                                                                                                                                  Actuonix mini linear actuators are excellent for DIY and Arduino mini linear actuator projects. The L12-I series can be controlled from a regular servo PWM signal as well as voltage and current signaling. The PWM control is perfect for Arduino linear actuator projects because the actuator can be controlled just like a servo using the servo library. We recommend checking out our Arduino Linear Actuator Tutorials listed below. Each linear actuator also comes with mounting hardware and end...

                                                                                                                                                                                                                                                                                                                                  L12 50mm 210:1 Linear Actuator small linear actuator, small arduino linear actuator, Actuonix Linear Actuator, mini linear actuator
                                                                                                                                                                                                                                                                                                                                  Price: $90.00
                                                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                                                  Firgelli Item #: FR-L12-50-210-6-I -

                                                                                                                                                                                                                                                                                                                                    Actuonix mini linear actuators are excellent for DIY and Arduino mini linear actuator projects. The L12-I series can be controlled from a regular servo PWM signal as well as voltage and current signaling. The PWM control is perfect for Arduino linear actuator projects because the actuator can be controlled just like a servo using the servo library. We recommend checking out our Arduino Linear Actuator Tutorials listed below. Each linear actuator also comes with mounting hardware and end...

                                                                                                                                                                                                                                                                                                                                    Magnetic Door Switch Magnetic Door Switch, Magnetic Switch, Digital switch, Arduino switch, Seeeduino switch, Freeduino switch
                                                                                                                                                                                                                                                                                                                                    Price: $4.95
                                                                                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                                                                                    Seeed Studio Item #: SS-SEN114A2B -

                                                                                                                                                                                                                                                                                                                                      Easily attach to doors with screw holes. Referred article: Window Magnet Contact - (use with Arduino)

                                                                                                                                                                                                                                                                                                                                      Motor Driver 1A Dual TB6612FNG
                                                                                                                                                                                                                                                                                                                                      Price: $8.95
                                                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                                                      SparkFun Item #: SF-ROB-09457 -

                                                                                                                                                                                                                                                                                                                                        The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode. Logic supply voltage (VCC) can be in...

                                                                                                                                                                                                                                                                                                                                        Phidgets 30 AMP Current Sensor AC&DC Phidget 30 AMP Current Sensor AC&DC, Phidget 30s AMP Current Sensor, Phidget Current Sensor, Phidgets Current Sensor, Phidgets High Amp Current Sensor, Phidget Amp Sensor
                                                                                                                                                                                                                                                                                                                                        Price: $31.00
                                                                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                                                                        Phidgets Inc Item #: PH-1122 -

                                                                                                                                                                                                                                                                                                                                          Measure AC & DC Current from -30 to +30 Amps. Includes 60cm sensor cable.  This sensor outputs 0-5V and is intended to be used with the Phidgets 8/8/8. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line, follow this link. Getting Started with Phidgets Phidgets Documentation:...

                                                                                                                                                                                                                                                                                                                                          Phidgets Differential Gas Pressure Sensor Phidgets Differential Gas Pressure Sensor, Phidget Differential Gas Pressure Sensor
                                                                                                                                                                                                                                                                                                                                          Price: $32.00
                                                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                                                          Phidgets Inc Item #: PH-1126 -

                                                                                                                                                                                                                                                                                                                                            The Differential Pressure Sensor is a dual ported gas pressure sensor that measures the pressure difference between the two ports. It can measure both positive and negative pressure from –25kPa to +25 kPa. Comes packaged with a 60cm sensor cable Product Manual This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the...

                                                                                                                                                                                                                                                                                                                                            Phidgets Humidity & Temperature Sensor Phidgets Humidity/Temperature Sensor, Phidget Humidity/Temperature Sensor
                                                                                                                                                                                                                                                                                                                                            Price: $50.00
                                                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                                                            Phidgets Inc Item #: PH-1125 -

                                                                                                                                                                                                                                                                                                                                              Product Specifications Humidity Sensor Current Consumption: 3.6mA -Output Impedance : 1K ohms -Accuracy: 3% RH -Bandwidth / Reaction Time for humidity -Minimum / Maximum Voltage -Range of Operation -Operating temperature range Temperature Sensor -Current Consumption:300uA -Output Impedance: 1K ohms -Accuracy: 1ºC -Minimum/Maximum Voltage -Range of Operation: -50ºC to +150ºC This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost...

                                                                                                                                                                                                                                                                                                                                              Phidgets 1048 board close up
                                                                                                                                                                                                                                                                                                                                              Price: $100.00
                                                                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                                                                              Phidgets Inc Item #: PH-1048 -

                                                                                                                                                                                                                                                                                                                                                Connect up to four thermocouples to this board to measure the temperature of four different objects. Plugs directly into a USB port. Thermocouples are widely used to measure extreme temperatures impossible to measure with other types of sensors. J, K, E and T thermocouples are directly supported in the library and return the measured temperature in °C. It is possible to interface other thermocouple types by converting the measured potential returned by the Temperature Sensor into Celsius...

                                                                                                                                                                                                                                                                                                                                                Probe jumper wire – 8pcs
                                                                                                                                                                                                                                                                                                                                                Price: $4.00
                                                                                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                Seeed Studio Item #: SS-CAB01101M -

                                                                                                                                                                                                                                                                                                                                                  This is a 300mm jumper wire with probe, it is easy for connecting two point.

                                                                                                                                                                                                                                                                                                                                                  RobotGeek Long Servo C Bracket RobotGeek, robot, geek, Long, Servo, C, Bracket, c-bracket, hinge, frame, hobby, arduino, geekduino
                                                                                                                                                                                                                                                                                                                                                  Price: $4.95
                                                                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                  RobotGeek Item #: RG-TR00035 -

                                                                                                                                                                                                                                                                                                                                                    Need a bit more reach for your RobotGeek servo based project? The RobotGeek Long Servo C Bracket is a great tool for creating long reaching joints with your RobotGeek Servo. This bracket easily attaches to the servo's horns with just a few bolts. A variety of mounting holes on the bracket make it easy to mount the bracket to your robot or sensors in a variety of ways. The circular hole pattern on the bottom of the bracket will also attach directly to a RobotGeek Servo Horn or other brackets,...

                                                                                                                                                                                                                                                                                                                                                    RobotGeek Rotation Knob with Neopixel Ring Display RobotGeek, Rotation, Knob, potentiometer, Neopixel, Ring, Display, kit
                                                                                                                                                                                                                                                                                                                                                    Price: $13.95
                                                                                                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                    RobotGeek Item #: ASM-NEOKNOB -

                                                                                                                                                                                                                                                                                                                                                      Want to make a dial that clearly displays the setting of a knob, like in fancy car stereos and sequencers? The RobotGeek Rotation Knob with Neopixel Ring Display is here for you! With a bright and clear 12 RGB LED NeoPixel ring nicely mounted with a RobotGeek Rotation Knob in the center, there are a ton of ways to enhance your next project! The mount is matched with the centimeter grid pattern, compatible with All RobotGeek Workbenches. ...

                                                                                                                                                                                                                                                                                                                                                      EL inverter wide view
                                                                                                                                                                                                                                                                                                                                                      Price: $8.50
                                                                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                      Seeed Studio Item #: SS-POW10301P -

                                                                                                                                                                                                                                                                                                                                                        The Robust EL Inverter For EL Shield turns DC voltage from your Arduino or Geekduino into high frequency AC for powering electroluminescent (EL) devices. The rated input voltage is 3.3-5 V, so it should work well with most micro-controllers. It produces high frequency 110 V AC which is perfect for powering EL wire. Keep in mind that it does produce a quiet but audible high frequency noise when connected to power. In most applications it won't be noticeable. This inverter can power up to 15 m...

                                                                                                                                                                                                                                                                                                                                                        Solenoid Valve arduino Solenoid valve, arduino solenoid water valve, solenoid liquid valve, arduino solenoid valve, arduino water valve, arduino liquid valve
                                                                                                                                                                                                                                                                                                                                                        Price: $19.95
                                                                                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                        RobotGeek Item #: HW-WVALVE -

                                                                                                                                                                                                                                                                                                                                                          If you are looking for an Arduino solenoid valve the RobotGeek liquid solenoid valve is a perfect solution. Compact with mounting holes make it a great fit for DIY projects of all kinds. The Solenoid Valve is a great companion to the Large DC Liquid Pump and the Small DC Liquid Pump. When building pumping projects sometimes it is necessary to add a valve to stop either liquid back draw or unwanted flow. When using diaphram pumps if your liquid supply is higher than your pouring point, pressure...

                                                                                                                                                                                                                                                                                                                                                          Turbo-Fuse Blue Plastic Safe Thread Locker 2ml Turbo-Fuse Blue Plastic Safe Thread Locker
                                                                                                                                                                                                                                                                                                                                                          Price: $3.95
                                                                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                          Item #: PL-20001 -

                                                                                                                                                                                                                                                                                                                                                            Turbo Lock Blue is a plastic safe thread locker. This is the thread locker that we include in all our kits. This thread locker is a medium to strong bond and works on both plastic and metal without causing any plastic weakness. Turbo Lock Blue creates a good strong bond to hold nuts, bolts, and standoffs in place. Yet it can still be broken free with regular tools if you need to take something apart again. Highly recommended for any robotics project that has a lot of shake or movement...

                                                                                                                                                                                                                                                                                                                                                            Turbo-Lock Blue Thread 2ml
                                                                                                                                                                                                                                                                                                                                                            Price: $2.95
                                                                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                            Item #: 11-001 -

                                                                                                                                                                                                                                                                                                                                                              Turbo Lock Anaerobic Thread Locker (Blue) (Medium Strength, Removable) Robots tend to jiggle and vibrate a lot. When they do this long enough their nuts and bolts shed like an Alabama dog in the spring. It is highly recommended to use a thread locker to prevent this from happening. Turbo Lock does a great job keeping your robots together. See our pro tip below about how to easily use it during assembly. This is a 2ml vial. The larger 10ml bottle is here. PLEASE NOTE: This version of Turbo Lock...

                                                                                                                                                                                                                                                                                                                                                              Wireless Charging Module - 5V/1A
                                                                                                                                                                                                                                                                                                                                                              Price: $8.50
                                                                                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                              Seeed Studio Item #: SS-106990017 -

                                                                                                                                                                                                                                                                                                                                                                The Wireless Charging Module can be applied in electronic equipments in common use for close wireless charging or power supply. Consisted of a transmitter and insulation coil, it could serve as a replacement for the Wireless Power Supply with stable 5V output voltage and maximum 1.2A output current. Its small size and insulation coil is more suitable for using in wireless project. Most important of all, you can get the output 5v and 1A with 5v input voltage. High efficiency stabilized power...

                                                                                                                                                                                                                                                                                                                                                                FR05-B101K Back Frame Set RX-64, Bracket, Frame, FR05-B101K, Back, Frame Set, Robotis Dynamixel, Servo, Actuator
                                                                                                                                                                                                                                                                                                                                                                Price: $31.90
                                                                                                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                Robotis Co. Item #: RO-903-0153-100 -

                                                                                                                                                                                                                                                                                                                                                                  The FR05-B101K Back Frame Set provides a pattern bracket that attaches to the rear side of RX-64 and MX-64 DYNAMIXELS. Kit Contents:1 x FR05-B101K (Black)8 x M2.5*8 Bolts

                                                                                                                                                                                                                                                                                                                                                                  FR05-S101K Side Frame Set RX-64, EX-106+, FR05-S101K, Side, Frame, Set, Robotis, Dynamixel, MX-64, MX-106
                                                                                                                                                                                                                                                                                                                                                                  Price: $14.90
                                                                                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                  Robotis Co. Item #: RO-903-0152-100 -

                                                                                                                                                                                                                                                                                                                                                                    The FR05-S101K Side Frame Set provides a pattern bracket that attaches to the side or bottom of RX-64, MX-64. and MX-106 DYNAMIXELS. Kit Contents:1 x FR05-S101K (Black)8 x M2.5*6 Bolts4 x M2.5 Nuts

                                                                                                                                                                                                                                                                                                                                                                    FR05-H101K Hinge Frame Set RX-64, FR05-H101K, Hinge, Frame, Set, Robotis, Dynamixel, Bracket, Servo, Actuator, MX-64
                                                                                                                                                                                                                                                                                                                                                                    Price: $29.90
                                                                                                                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                    Robotis Co. Item #: RO-903-0151-100 -

                                                                                                                                                                                                                                                                                                                                                                      The FR05-H101K Hinge Frame Set is a straight hinge frame for building joints using the RX-64 and MX-64 DYNAMIXELS. Kit Contents:1 x FR05-H101K (Black)1 x HN05-I101 Idler1 x Bearing1 x Bearing Cap10 x M2.5*4 Bolts4 x M2.5*6 Bolts1 x M3*6 Bolt

                                                                                                                                                                                                                                                                                                                                                                      Phidgets Mini Joy Stick Phidgets Mini Joy Stick, Phidget Mini Joy Stick, Phidgets Analog Joystick, Phidget Analog Joystick, mini Analog Joystick
                                                                                                                                                                                                                                                                                                                                                                      Price: $15.00
                                                                                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                      Phidgets Inc Item #: PH-1113 -

                                                                                                                                                                                                                                                                                                                                                                        Mini Joy Stick Sensor Two axis joystick with 10k potentiometers and a momentary switch. Comes with (2) 24-inch sensor cables. This miniature joystick has two axes and a push button.  Pressing down on the Joystick pin will make a mometary contact which can be connected to a digital input through the terminal blocks. NOTE: This joystick auto-centers itself. When you let go of it the joystick will snap back to it's center position. Board Dimensions: 5.1 x 3.0 cm Mounting Holes: 3.0 x 2.3...

                                                                                                                                                                                                                                                                                                                                                                        FR05-X101K Cross Frame Set RX-64, FR05-X101K, Cross, Frame, Bracket, Set, Bracket, Robotis, Dynamixel, Servo, Actuator, MX-64
                                                                                                                                                                                                                                                                                                                                                                        Price: $34.90
                                                                                                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                        Robotis Co. Item #: RO-903-0154-100 -

                                                                                                                                                                                                                                                                                                                                                                          The FR05-X101K Cross Frame Set is for mounting RX-64 or MX-64 DYNAMIXELS side-to-back. It is generally used in conjunction with the FR05-F101K Flange Bearing Frame Set (shown pictured above) Kit Contents:2 x FR05-x101K (Black)4 x M2.5*6 Bolts4 x M2.5*8 Bolts4 x M2.5 Nut

                                                                                                                                                                                                                                                                                                                                                                          Phidgets Slider 60 Phidgets Slider 60, Phidget Slider 60, Phidgets Analog Slider, Phidget Slider Pot, Phidget Slider Potentiometer
                                                                                                                                                                                                                                                                                                                                                                          Price: $11.00
                                                                                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                          Phidgets Inc Item #: PH-1112 -

                                                                                                                                                                                                                                                                                                                                                                            60mm Slider, with 24-inch cable. This device is a variable resistor similar to a potentiometer. When the slider is at one side it will read zero and 1000 when the slider is at the other end. Board Dimensions: 3.0 x 9.1 cmMounting Holes: 2.3 x 6.8 cm This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire...

                                                                                                                                                                                                                                                                                                                                                                            FR05-F101K Flange Bearing Frame Set RX-64, EX-106+, FR05-F101K, Flange, Bearing, Set, Frame, Robotis, Dynamixel
                                                                                                                                                                                                                                                                                                                                                                            Price: $43.90
                                                                                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                            Robotis Co. Item #: RO-903-0155-100 -

                                                                                                                                                                                                                                                                                                                                                                              The FR05-F101K Flange Bearing Frame Set provides a side mounting point & Bearing Idler Hub for attaching rotational assemblies to the side of RX-64, MX-64. and MX-106 DYNAMIXELS. It is generally used in conjunction with the FR05-X101K Cross Frame Set(for 64 models) or FR08-X101K Cross Frame Set (for 106 models). Kit Contents:1 x FR05-F101K (Black)1 x FR05-S101 (Silver)1 x HN05-I101 Idler1 x Bearing1 x Bearing Cap18 x M2.5*4 Bolts8 x M2.5*6 Bolts1 x M3*6 Bolt4 x M2.5 Nuts ...

                                                                                                                                                                                                                                                                                                                                                                              2 Inch Stroke 110 LB Linear Actuator with Feedback Linear Actuator, push actuator, SPAL
                                                                                                                                                                                                                                                                                                                                                                              Price: $107.95
                                                                                                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                              Item #: M-200-50-5-1577-2 -

                                                                                                                                                                                                                                                                                                                                                                                This is a 12V DC 110lb Linear Actuator from Creative Werks. (part number LACT2P) These are reliable, well built tough linear actuators. The sturdy mounting brackets make them easy to mount and won't break. If you are looking for a basic manual controller we recommend the Linear Actuator Controller kit. If you are looking to control these from an Arduino we recommend checking out the Arduino Linear Actuator tutorials below! Arduino Linear Actuator Tutorials: Preset Position Button Control of a...

                                                                                                                                                                                                                                                                                                                                                                                2 Pin Dual-Female Jumper Wire - 300mm - 10pcs pack 2 Pin, Dual, Female, Jumper, Wire, 300mm, cable
                                                                                                                                                                                                                                                                                                                                                                                Price: $4.50
                                                                                                                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                Seeed Studio Item #: CBL-S-CAB103C4O -

                                                                                                                                                                                                                                                                                                                                                                                  These 2 Pin Dual-Female Jumper Wire - 300mm - 10pcs pack are perfect for prototyping. Use them to run power from one breadboard rail to another, or use multiples to connect signals from one board to another. Each pack comes with 10 cables and each cable is 300mm long. The .1" pitch is great for standard breadboards.

                                                                                                                                                                                                                                                                                                                                                                                  9v Battery Snap Connect 9v, Battery, Snap, Connect, barrel, jack, cable, plug
                                                                                                                                                                                                                                                                                                                                                                                  Price: $2.95
                                                                                                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                  Item #: CBL-9VSNP -

                                                                                                                                                                                                                                                                                                                                                                                    The 9v Battery Snap Connect is the perfect companion to any 2.1*5.5mm female power jack. Whether you need to hook up to an Arduino/Geekduino Board, a Female Pigtail Lead or the AX/MX Power Hub, this cable has you covered. The tail is 10" long. Powering your project with a 9 volt battery has never been this easy. The 90 degree angle plug lets you hook up, even in tight spaces! ...

                                                                                                                                                                                                                                                                                                                                                                                    Large Solenoid Front
                                                                                                                                                                                                                                                                                                                                                                                    Price: $19.95
                                                                                                                                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                    RobotGeek Item #: ASM-SOL-LG -

                                                                                                                                                                                                                                                                                                                                                                                      If you are looking for a solenoid for your DIY, educational, or Arduino solenoid project the RobotGeek solenoids are a great choice. This is the Large version of the solenoid line with a plunger travel of 12mm and up to 3468 g/7.65 lbs of force. (View the specifications tab for full information.) If you want to control this solenoid from your Arduino all you need is to add a RobotGeek Relay and power source and you have an Arduino Solenoid project! Check out our Arduino Solenoid Tutorial for...

                                                                                                                                                                                                                                                                                                                                                                                      Robot Geek Duino Mount
                                                                                                                                                                                                                                                                                                                                                                                      Price: $5.95
                                                                                                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                      RobotGeek Item #: ASM-RG-DUINOMNT -

                                                                                                                                                                                                                                                                                                                                                                                        The Duino Mounting Plate converts the Arduino three hole pattern to the standard Robot Geek hole pattern. All Robot Geek kits, sensors, and components conform to a 1 x 1 centimeter grid making it easy to custom build your projects any way you desire. The Duino Mounting Plate allows you to easily mount and move your Arduino boards anywhere you want on your Robot Geek projects. *NOTE: The Duino Mounting plate does not come with the Geekduino. ...

                                                                                                                                                                                                                                                                                                                                                                                        RobotGeek Joystick arduino joystick, arduino analog joystick, arduino joystick sensor, arduino joystick potentiometer
                                                                                                                                                                                                                                                                                                                                                                                        Price: $5.95
                                                                                                                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                        RobotGeek Item #: ASM-RG-JOYSTICKV2 -

                                                                                                                                                                                                                                                                                                                                                                                          If you are looking for a good Arduino Joystick the RobotGeek Joystick is the best choice. We had these joysticks special made two joystick options; the standard mushroom top used in gaming controllers and a tall stick for much greater range of motion. The joystick has the standard RobotGeek three pin connection and plugs right into the RobotGeek Sensor Shield so you can be up and running immediatly. This arduino joystick is self centering and will return to the home position when let go. The...

                                                                                                                                                                                                                                                                                                                                                                                          HN05-N102 Servo Horn Set MX-64, Bracket, Frame, Servo, Horn, MX-106+, HN05-N102,dyanmixel horn
                                                                                                                                                                                                                                                                                                                                                                                          Price: $10.90
                                                                                                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                          Robotis Co. Item #: RO-903-0202-000 -

                                                                                                                                                                                                                                                                                                                                                                                            The HN05-N102 Servo Horn Set is a replacement servo horn set for the MX-64T/MX-64R & MX-106T/MX-106R DYNAMIXELS. These are also great for the MX-64 bulk packs and the MX-106 Bulk Packs. Kit Contents:1 x HN05-N102 Horn1 x Thrust Washer10 x M2.5*4 Bolts1 x M3*8 Bolt Projects Using the RX-64 Dynamixel Servos & Brackets --> Strength & Speed Chart of the Dynamixel Family --> ...

                                                                                                                                                                                                                                                                                                                                                                                            HN05-T101 Thrust Horn Set RX-64, Bracket, Frame, Thrust, Bearing, EX-106+, HN05-T101, MX-64, MX-106
                                                                                                                                                                                                                                                                                                                                                                                            Price: $14.10
                                                                                                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                            Robotis Co. Item #: RO-903-0158-000 -

                                                                                                                                                                                                                                                                                                                                                                                              The HN05-T101 Thrust Horn Set is a thrust washer & horn set for extra stability when using RX-64 & EX-106+ Dynamixels. Note: This Thrust Horn cannot be used in conjunction with Hinge Frames Sets. Nut & Bolt Hardware Included. PLEASE NOTE: The HN05-T101 Thrust Horn Set is not compatible with the newer MX-64 and MX-106 series DYNAMIXEL. These have integrated thrust washers and do not need the additional stability. Kit Contents: 1 x FR08-T101K (Black) 1 x BEaring 1226T 10 x M2.5*4...

                                                                                                                                                                                                                                                                                                                                                                                              HN05-I101 Idler Bearing Set RX-64, EX-106+, HN05-I101, Idler, Bearing, Set, Robotis, Dynamixel, Mx-106, mx-64
                                                                                                                                                                                                                                                                                                                                                                                              Price: $15.40
                                                                                                                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                              Robotis Co. Item #: RO-903-0157-000 -

                                                                                                                                                                                                                                                                                                                                                                                                The HN05-I101 Idler Bearing Set provides a passive idler hub on the back side of the servo for building joints using the RX-64, MX-64. and MX-106 . Kit Contents:1 x HN05-I101 Idler1 x Bearing1 x Bearing Cap10 x M2.5*4 Bolts1 x M3*6 Bolt Projects Using the RX-64 Dynamixel Servos & Brackets --> Strength & Speed Chart of the Dynamixel Family --> ...

                                                                                                                                                                                                                                                                                                                                                                                                1/2 Inch Piping Flow Switch
                                                                                                                                                                                                                                                                                                                                                                                                Price: $12.99
                                                                                                                                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                Seeed Studio Item #: SS-SEN104A2B -

                                                                                                                                                                                                                                                                                                                                                                                                  This sensor works as a switch, conducts while flow pass though. Specifications Max switch current: 0.5 A Max load current : 1.0 A Max resistance: 100 ohm Max load power: 10 w Max switch voltage: 100 vdc Min damage voltage: 220 vdc Min sensible flow: ≥0.1L/MIN Working flow range: 1-30L/MIN Min sensible pressure: ≥0.1 mpa Min water pressure: 0. 1 mpa Max water pressure: 1.2 mpa Working temperature: 1-80°C Storage temperature: -20-10°C Life: >108 times Response time : 0.2 sec Release time : 0.2...

                                                                                                                                                                                                                                                                                                                                                                                                  120mm Slewing Bearing slewing bearing, robot slewing bearing, robot arm base bearing
                                                                                                                                                                                                                                                                                                                                                                                                  Price: $19.95
                                                                                                                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                  RobotGeek Item #: RW-120BEARING -

                                                                                                                                                                                                                                                                                                                                                                                                    The 120mm Slewing Bearing is the smaller version of the 140mm slewing bearing found in our Robotic Arms. Each bearing is made of a soft aluminum alloy and sports a single row of spherical bearings. These bearings give the bearing a silky smooth movement, perfect for assisting your robotic arm base, or just about any other moving joint. The slewing bearing goes great with the Standoff Variety Pack and the Nut and Bolt Variety Pack, giving you all the hardware you need to attach the bearing to a...

                                                                                                                                                                                                                                                                                                                                                                                                    4 Inch Stroke 110 LB Linear Actuator with Feedback large Linear Actuator, large arduino linear actuator, linear actuator for arduino
                                                                                                                                                                                                                                                                                                                                                                                                    Price: $109.95
                                                                                                                                                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                    Item #: M-200-50-5-1577-4 -

                                                                                                                                                                                                                                                                                                                                                                                                      This is a 12V DC 110lb Linear Actuator from Creative Werks. (part number LACT2P) These are reliable, well built tough linear actuators. The sturdy mounting brackets make them easy to mount and won't break. If you are looking for a basic manual controller we recommend the Linear Actuator Controller kit. If you are looking to control these from an Arduino we recommend checking out the Arduino Linear Actuator tutorials below! Arduino Linear Actuator Tutorials: Preset Position Button Control of a...

                                                                                                                                                                                                                                                                                                                                                                                                      medium solenoid
                                                                                                                                                                                                                                                                                                                                                                                                      Price: $14.95
                                                                                                                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                      RobotGeek Item #: ASM-SOL-MD -

                                                                                                                                                                                                                                                                                                                                                                                                        If you are looking for a solenoid for your DIY, educational, or Arduino solenoid project the RobotGeek solenoids are a great choice. This is the Medium version of the solenoid line with a plunger travel of 7mm and up to 1800 g/3.97 lbs lbs of force. (View the specifications tab for full information.) If you want to control this solenoid from your Arduino all you need is to add a RobotGeek Relay and power source and you have an Arduino Solenoid project! Check out our Arduino Solenoid Tutorial...

                                                                                                                                                                                                                                                                                                                                                                                                        RobotGeek Slider arduino slide potentiometer, arduino slider, analog slider control, arduino slider sensor, arduino slide control
                                                                                                                                                                                                                                                                                                                                                                                                        Price: $6.95
                                                                                                                                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                        RobotGeek Item #: ASM-RG-SLIDER -

                                                                                                                                                                                                                                                                                                                                                                                                          The RobotGeek Slider is a great arduino slide potentiometer for projects requiring a linear analog input. The slider has the standard RobotGeek three pin connection and plugs right into the RobotGeek Sensor Shield so you can be up and running immediatly. This arduino slide control is a linear potentiometer, which means you can read it just as you would any other potentiometer/analog sensor. The large handle cap and the smooth action on this slider make it great for all kinds of control panels...

                                                                                                                                                                                                                                                                                                                                                                                                          Premium USB to Micro USB Charge & Sync Cable - 6ft
                                                                                                                                                                                                                                                                                                                                                                                                          Price: $6.95
                                                                                                                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                          RobotGeek Item #: CBL-USB2MICRO -

                                                                                                                                                                                                                                                                                                                                                                                                            This 6ft Micro USB Cable is perfect for powering and programming controllers like the RobotGeek Geekduino

                                                                                                                                                                                                                                                                                                                                                                                                            FR08-B101K Back Frame Set EX-106+, FR08-B101K, Back, Frame, Set, Robotis, Dynamixel, Servo, Actuator, Bracket, MX-106
                                                                                                                                                                                                                                                                                                                                                                                                            Price: $31.90
                                                                                                                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                            Robotis Co. Item #: RO-903-0169-100 -

                                                                                                                                                                                                                                                                                                                                                                                                              The FR08-B101K Adapter Frame Set provides a mounting pattern bracket on the rear side of the MX-106 DYNAMIXEL. Kit Contents:1 x FR08-B101K (Black)8 x M2.5*8 Bolts Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                                                                                                                                                                                                                                                                                                              FR08-D101K Adapter Frame Set EX-106+, FR08-D101K, Adapter, Frame, Set, Robotis, Dynamixel, Servo, Actuator, Bracket, MX-106
                                                                                                                                                                                                                                                                                                                                                                                                              Price: $44.90
                                                                                                                                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                              Robotis Co. Item #: RO-903-0171-100 -

                                                                                                                                                                                                                                                                                                                                                                                                                The FR08-D101K Hinge Frame Set allows you mount 2 MX-106 DYNAMIXELS side-to-side. The MX-106 robot actuators can be 'linked' together in a fashion that allows them to move together as one, double torque, actuator when in this configuration. You will need a FR08-H110K Adapter Frame Set to connect the 2 MX-106T horns. See the Double MX-106T Robot Joint Kit for an all-in-one joint kit. Kit Contents:1 x FR08-D101K (Black)8 x M2.5*8 Bolts Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                                                                                                                                                                                                                                                                                                                FR08-H101K Hinge Frame Set EX-106+, FR08-H101K, Hinge, Frame, Set, Bracket, Robotis, Dynamixel, Servo, Actuator, MX-106
                                                                                                                                                                                                                                                                                                                                                                                                                Price: $29.90
                                                                                                                                                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                Robotis Co. Item #: RO-903-0167-100 -

                                                                                                                                                                                                                                                                                                                                                                                                                  The FR08-H101K Hinge Frame Set is a straight hinge frame for building joints using the MX-106 DYNAMIXELS. Kit Contents:1 x FR08-H101K (Black)1 x HN05-I101 Idler1 x Bearing1 x Bearing Cap10 x M2.5*4 Bolts4 x M2.5*6 Bolts1 x M3*6 Bolt Strength & Speed Chart of the Dynamixel Family ...

                                                                                                                                                                                                                                                                                                                                                                                                                  FR08-H110K Dual Hinge Frame Set EX-106+, FR08-H110K, Dual, Hinge, Frame, Set, Bracket, Robotis, Dynamixel, Servo, Actuator, MX-106
                                                                                                                                                                                                                                                                                                                                                                                                                  Price: $59.90
                                                                                                                                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                  Robotis Co. Item #: RO-903-0168-100 -

                                                                                                                                                                                                                                                                                                                                                                                                                    The FR08-H110K Hinge Frame Set allows you to create a dual MX-106 joints. The MX-106 robot actuators can be 'linked' together in a fashion that allows them to move together as one, double torque, actuator when in this configuration. You will need a FR08-D101K Adapter Frame Set to connect the 2 MX-106T See the Double MX-106T Robot Joint Kit for an all-in-one joint kit. Kit Contents:1 x FR08-H110K (Black)1 x HN05-I101 Idler1 x Bearing1 x Bearing Cap10 x M2.5*4 Bolts4 x M2.5*6 Bolts1 x M3*6 Bolt...

                                                                                                                                                                                                                                                                                                                                                                                                                    FR08-X101K Cross Frame Set EX-106+, FR08-X101K, Cross, Frame, Set, Bracket, Robotis, Dynamixel, Servo, Actuator, MX-106
                                                                                                                                                                                                                                                                                                                                                                                                                    Price: $31.90
                                                                                                                                                                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                    Robotis Co. Item #: RO-903-0170-100 -

                                                                                                                                                                                                                                                                                                                                                                                                                      Frame Compatibility Chart 2D & 3D models for DYNAMIXEL Servos & frames Note: You can view DWG files using a free download of eDrawings Viewer. Various CAD apps support STP & DWG Files. ...

                                                                                                                                                                                                                                                                                                                                                                                                                      6 Inch Stroke 110 LB Linear Actuator with Feedback large Linear Actuator, large arduino linear actuator, linear actuator for arduino
                                                                                                                                                                                                                                                                                                                                                                                                                      Price: $109.95
                                                                                                                                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                      Item #: M-200-50-5-1577-6 -

                                                                                                                                                                                                                                                                                                                                                                                                                        This is a 12V DC 110lb Linear Actuator from Creative Werks. (part number LACT2P) These are reliable, well built tough linear actuators. The sturdy mounting brackets make them easy to mount and won't break. If you are looking for a basic manual controller we recommend the Linear Actuator Controller kit. If you are looking to control these from an Arduino we recommend checking out the Arduino Linear Actuator tutorials below! Arduino Linear Actuator Tutorials: Preset Position Button Control of a...

                                                                                                                                                                                                                                                                                                                                                                                                                        DC Straight to 90 Cable DC Straight to 90 Cable, dc power cable, 90 degree power cable, straight to 90 degree power cable, dc 90 degree power cable
                                                                                                                                                                                                                                                                                                                                                                                                                        Price: $3.95
                                                                                                                                                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                        InterbotiX Labs Item #: CBL-DC90CONV -

                                                                                                                                                                                                                                                                                                                                                                                                                          Sometimes the size difference between a straight barrel plug and a 90° barrel plug determines whether or not a project will fit in an enclosure. Now with the DC Straight to 90 Cable you can easily convert straight barrel jacks to 90° jacks! Each cable is 20cm long and has a 2.1*5.5mm barrel jack, making it compatible with many of our power supplies and wiring harnesses.

                                                                                                                                                                                                                                                                                                                                                                                                                          RobotGeek Tilt Sensor arduino tilt sensor, tilt sensor, arduino digital tilt senor, arduino tilt senor board
                                                                                                                                                                                                                                                                                                                                                                                                                          Price: $4.95
                                                                                                                                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                          RobotGeek Item #: ASM-RG-TILTSEN -

                                                                                                                                                                                                                                                                                                                                                                                                                            The RobotGeek Tilt Sensor is a fast and flexible way to add an Arduino tilt senor Project. By reading this sensor as a digital input, you can determine if an object the sensor is mounted on tilted or not. This sensor is unique because of the orientation of its ports. Instead of having the tilt switch soldered into the board, there are two 2-pin female ports. This allows you to orient your tilt vertically or horizontally to suit your project best. If you need your tilt switch to be further away...

                                                                                                                                                                                                                                                                                                                                                                                                                            small solenoid
                                                                                                                                                                                                                                                                                                                                                                                                                            Price: $9.95
                                                                                                                                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                            RobotGeek Item #: ASM-SOL-SM -

                                                                                                                                                                                                                                                                                                                                                                                                                              If you are looking for a solenoid for your DIY, educational, or Arduino solenoid project the RobotGeek solenoids are a great choice. This is the Medium version of the solenoid line with a plunger travel of 5mm and up to 700 g/1.54 lbs lbs of force. (View the specifications tab for full information.) If you want to control this solenoid from your Arduino all you need is to add a RobotGeek Relay and power source and you have an Arduino Solenoid project! Check out our Arduino Solenoid Tutorial...

                                                                                                                                                                                                                                                                                                                                                                                                                              USB A Male to Mini B (5P) M - 6ft
                                                                                                                                                                                                                                                                                                                                                                                                                              Price: $4.95
                                                                                                                                                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                              Item #: CBL-USBA2MINI -

                                                                                                                                                                                                                                                                                                                                                                                                                                Description This USB A plug to Mini 5 pin (one ID Pin) plug is designed for USB peripherals such as cellular phones, digital devices or PDA. Introduction: With much smaller than existing USB connectors, our 5 pin (one ID Pin) provides reliable host-to-peripherals connectivity for portable/hand-help PC architecture, cellular phones and other digital devices, such as, DSC and PDA. This product is fully compliant with USB 1.1 Standard Specification.

                                                                                                                                                                                                                                                                                                                                                                                                                                8 Inch Stroke 110 LB Linear Actuator with Feedback large Linear Actuator, large arduino linear actuator, linear actuator for arduino
                                                                                                                                                                                                                                                                                                                                                                                                                                Price: $109.95
                                                                                                                                                                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                Item #: M-200-50-5-1577-8 -

                                                                                                                                                                                                                                                                                                                                                                                                                                  This is a 12V DC 110lb Linear Actuator from Creative Werks. (part number LACT2P) These are reliable, well built tough linear actuators. The sturdy mounting brackets make them easy to mount and won't break. If you are looking for a basic manual controller we recommend the Linear Actuator Controller kit. If you are looking to control these from an Arduino we recommend checking out the Arduino Linear Actuator tutorials below! Arduino Linear Actuator Tutorials: Preset Position Button Control of a...

                                                                                                                                                                                                                                                                                                                                                                                                                                  90 Degree DC to Pigtail Cable 90, Degree, DC, Pigtail, Cable, barrel, jack
                                                                                                                                                                                                                                                                                                                                                                                                                                  Price: $3.95
                                                                                                                                                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                  Dongguan LANO (Kale) Electronic Company Item #: CBL-90PIGTAIL -

                                                                                                                                                                                                                                                                                                                                                                                                                                    The 90 Degree DC to Pigtail Cable is the perfect companion to any 2.1*5.5mm female power jack. Whether you need to hook up to an Arduino/Geekduino Board, a Female Pigtail Lead or the AX/MX Power Hub, this cable has you covered. The tail is 10" long and splits easily. Marked side negative, unmarked positive. The 90 degree angle plug lets you hook up, even in tight spaces! ...

                                                                                                                                                                                                                                                                                                                                                                                                                                    Grove LED Grove LED, arduino LED, seeeduino LED
                                                                                                                                                                                                                                                                                                                                                                                                                                    Price: $2.95
                                                                                                                                                                                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                    Seeed Studio Item #: SS-COM22341P -

                                                                                                                                                                                                                                                                                                                                                                                                                                      One green LED. It operates from 5V DC. Perfect for use on Seeeduino digital outputs, or also can be controlled using pulse-width modulation. Each LED has a current-limiting resistor, which protects the LED and the Arduino from high current.

                                                                                                                                                                                                                                                                                                                                                                                                                                      Large Bread Board
                                                                                                                                                                                                                                                                                                                                                                                                                                      Price: $8.50
                                                                                                                                                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                      Seeed Studio Item #: SS-STR102C2B -

                                                                                                                                                                                                                                                                                                                                                                                                                                        Ah the bread board, unsung hero of the DIY electronics movement. How many circuits started as a tangle of wires on a breadboard? How many noted professionals got their start wiring on a breadboard? Well now you can keep the tradition alive with the Large Bread Board. The bread board is made up of rows upon rows of holes, waiting to be wired up with circuitry. Each row(terminal strip) is wired together to make it easy for you to wire up circuits. The Large Bread Board also has 4 columns(bus...

                                                                                                                                                                                                                                                                                                                                                                                                                                        RobotGeek Temperature Sensor RobotGeek, Temperature, temp, Sensor, thermometer, environment
                                                                                                                                                                                                                                                                                                                                                                                                                                        Price: $6.95
                                                                                                                                                                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                        RobotGeek Item #: ASM-RG-TEMP -

                                                                                                                                                                                                                                                                                                                                                                                                                                          Want to make your project kick into gear when life turns up the heat? The RobotGeek Temperature Sensor can feel its way through! With the 3-pin Sensor Cable standard, you can easily connect this to your project and start reading the temperature! Use it to activate your air conditioner, control the temperature in a cold frame, log the temperature of a greenhouse, or to monitor the temperature of a pie on the windowsill! The options are limitless and the temperature is accounted for. As with all...

                                                                                                                                                                                                                                                                                                                                                                                                                                          USB A Male to A Male USB, A, Male, to, USB A Male
                                                                                                                                                                                                                                                                                                                                                                                                                                          Price: $5.95
                                                                                                                                                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                          Item #: CBL-USBA2A -

                                                                                                                                                                                                                                                                                                                                                                                                                                            The USB A Male to A Male cable is a strange one. With a USB A Male plug on each end, this cable allows you to hook up USB devices in non-standard ways. If you need it, you know.

                                                                                                                                                                                                                                                                                                                                                                                                                                            10 Inch Stroke 110 LB Linear Actuator with Feedback large Linear Actuator, large arduino linear actuator, linear actuator for arduino
                                                                                                                                                                                                                                                                                                                                                                                                                                            Price: $113.95
                                                                                                                                                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                            Item #: M-200-50-5-1577-10 -

                                                                                                                                                                                                                                                                                                                                                                                                                                              This is a 12V DC 110lb Linear Actuator from Creative Werks. (part number LACT2P) These are reliable, well built tough linear actuators. The sturdy mounting brackets make them easy to mount and won't break. If you are looking for a basic manual controller we recommend the Linear Actuator Controller kit. If you are looking to control these from an Arduino we recommend checking out the Arduino Linear Actuator tutorials below! Arduino Linear Actuator Tutorials: Preset Position Button Control of a...

                                                                                                                                                                                                                                                                                                                                                                                                                                              DC Squid Cable dc squid cable, squid cable, dc squid, squid cable female to male, female to male squid, 1 female to 6 male dc cable
                                                                                                                                                                                                                                                                                                                                                                                                                                              Price: $9.95
                                                                                                                                                                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                              InterbotiX Labs Item #: CBL-DCSQUID -

                                                                                                                                                                                                                                                                                                                                                                                                                                                Do you want to attach multiple devices to a single power supply, but don't want to splice and solder them all together? Then check out the DC Squid Cable. With this cable you can plug up to 6 devices up to one DC power supply. For example, you could connect 6 Arduino boards up to one power supply. Each barrel jack connector is 2.1*5.5mm. making it compatible with out many power supplies and wiring harnesses. Please keep in mind that it is up to the user to determine that the power supply can...

                                                                                                                                                                                                                                                                                                                                                                                                                                                Grove Chainable RGB LED Grove Chainable RGB LED, arduino LED, arduino RGB LED
                                                                                                                                                                                                                                                                                                                                                                                                                                                Price: $3.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                Seeed Studio Item #: SS-COM53140P -

                                                                                                                                                                                                                                                                                                                                                                                                                                                  The Chainable Grove RGB LED is based on P9813 chip which is a full-color LED driver chip that can provide modulated output of 256 levels. The RGB LED is chainable up to 1024 nodes. This is also an extra large LED measuring 8mm in diameter. Documentation Product Wiki Page

                                                                                                                                                                                                                                                                                                                                                                                                                                                  Medium Bread Board
                                                                                                                                                                                                                                                                                                                                                                                                                                                  Price: $5.50
                                                                                                                                                                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                  Seeed Studio Item #: SS-STR101C2M -

                                                                                                                                                                                                                                                                                                                                                                                                                                                    Sometimes half the board is just as useful! The Medium Bread Board is perfect for prototyping smaller circuits, or for mounting directly onto projects. The bread board is made up of rows upon rows of holes, waiting to be wired up with circuitry. Each row(terminal strip) is wired together to make it easy for you to wire up circuits. The Large Bread Board also has 4 columns(bus strips) wired together, to use to easily connect power to any individual terminal strip. Specifications 60 terminal...

                                                                                                                                                                                                                                                                                                                                                                                                                                                    Phidgets IR Distance Sensor Interface Phidgets IR Distance Sensor, Phidgets IR Sensor, Phidgets Distance Sensor, Phidgets Range Sensor
                                                                                                                                                                                                                                                                                                                                                                                                                                                    Price: $11.00
                                                                                                                                                                                                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                    Phidgets Inc Item #: PH-1101 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                      The Phidget IR Distance Sensor is an adapter to interface the Sharp IR distance sensors to the Phidget Interface Kit 8/8/8.  Sensor not included. Includes: Distance sensor interface board 24" Phidget sensor cable 12" Sharp sensor cable For more info, download the product manual: Product Manual You'll also need: Phidget Interface Kit 8/8/8 Sharp IR Distance Sensor Sharp GP2D12 IR Sensor (4-30") Sharp GP2Y0A02YK IR Sensor (8-60") This product is part of the Phidgets...

                                                                                                                                                                                                                                                                                                                                                                                                                                                      Phidgets MotorControl 1-Motor PhidgetMotorControl, PhidgetMotorControl 1-Motor, 1-Motor, Phidget Motor Control 1-Motor, Phidget Motor Control, USB Motor controller, 1065, P1065
                                                                                                                                                                                                                                                                                                                                                                                                                                                      Price: $80.00
                                                                                                                                                                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                      Phidgets Inc Item #: PH-1065 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                        Product Features Controls direction, velocity and acceleration of one DC Motor Requires external Power Supply (9 to 28VDC) Built-in 2 digital inputs, 2 analog inputs, 1 encoder input Protected against over-current, over-voltage, and over-temperature Connects directly to a computer's USB Port Product Description The 1065 lets you control the direction, velocity and acceleration of one DC Motor. The motor is powered by an external power supply (9 to 28VDC). Brushed DC Motors are very simple to...

                                                                                                                                                                                                                                                                                                                                                                                                                                                        Phidgets MotorControl HC PhidgetMotorControl HC, Phidget MotorControl HC, Phidget Motor Control HC, Phidgets MotorControl HC, Phidgets Motor Control HC, USB motor Controller
                                                                                                                                                                                                                                                                                                                                                                                                                                                        Price: $120.00
                                                                                                                                                                                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                        Phidgets Inc Item #: PH-1064 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                          The PhidgetMotorControl HC allows you to control the velocity and acceleration of up to two high-current DC motors. Many variations of brushed DC motors exist: permanent magnet motors, electromagnet motors, coreless motors, linear motors... the PhidgetMotorController can be used with any of these, as well as other devices like small solenoids, incandescent light bulbs, and hydraulic or pneumatic devices like small pumps and valves. Provides bi-directional control to 2 DC motors Requires...

                                                                                                                                                                                                                                                                                                                                                                                                                                                          Robot Geek 9G mount
                                                                                                                                                                                                                                                                                                                                                                                                                                                          Price: $3.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                          RobotGeek Item #: ASM-9GM -

                                                                                                                                                                                                                                                                                                                                                                                                                                                            This mount works with our plastic gear 9g servo and our metal gear 9g servo.The RobotGeek 9g Mount is a simple way to mount your 9g servos to any RobotGeek deck or platform. The mount and two standoffs conform to the Robot Geek 1 X 1 CM grid used in all RobotGeek kits. The standoffs in this kit are 20mm tall.If you are looking to mount a Sharp IR Range sensor on your servo check out our IR Sensor Mounting Kit! ...

                                                                                                                                                                                                                                                                                                                                                                                                                                                            RobotGeek Light Sensor robotgeek light sensor, photocell, light sensor, robotgeek, arduino light sensor, arduino photocell
                                                                                                                                                                                                                                                                                                                                                                                                                                                            Price: $3.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                            RobotGeek Item #: ASM-RG-LIGHT -

                                                                                                                                                                                                                                                                                                                                                                                                                                                              This RobotGeek Light Sensor is an analog sensor that will allow you to measure light from your Arduino or other microcontroller. The more light the sensor detects, the higher the your analog port will detect. Each RobotGeek Light Sensor comes with a dual female-female jumper cable so that you can move the light sensor off the board. This makes placing your sensors easier than ever. You can use this sensor to measure the ambient light in a room, or to measure the relative brightness of...

                                                                                                                                                                                                                                                                                                                                                                                                                                                              Phidgets Motion Sensor Phidgets Motion Sensor, Phidgets IR Motion Sensor, IR Motion Sensor, motion sensor, Phidget Motion Sensor, Phidget IR Motion Sensor,
                                                                                                                                                                                                                                                                                                                                                                                                                                                              Price: $45.00
                                                                                                                                                                                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                              Phidgets Inc Item #: PH-1111 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                This sensor is intended to be used with a Phidget Interface Kit 8/8/8 (Analog input). This sensor detects changes in infrared radiation which  occur when there is movement by a person (or object) which is different in temperature from the surroundings. As this sensor detects temperature differences, it is well suited to detecting the motion of people by their body temperature. The sensor is also characterized by a narrow sensing area. This kit includes (1) Phidget Motion Sensor and (1)...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                12 Inch Stroke 110 LB Linear Actuator with Feedback Linear Actuator, push actuator, SPAL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                Price: $113.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                Item #: M-200-50-5-1577-12 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is a 12V DC 110lb Linear Actuator from Creative Werks. (part number LACT2P) These are reliable, well built tough linear actuators. The sturdy mounting brackets make them easy to mount and won't break. If you are looking for a basic manual controller we recommend the Linear Actuator Controller kit. If you are looking to control these from an Arduino we recommend checking out the Arduino Linear Actuator tutorials below! Arduino Linear Actuator Tutorials: Preset Position Button Control of a...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Barrel Jack Male Pigtail Lead 2.1*5.5*12mm barrel jack male, pigtail lead, power cable, cable, pigtail power,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Price: $2.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ChinaSky Item #: CBL-PIGTAIL -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The Barrel Jack Male Pigtail Lead 2.1*5.5*12mm is the perfect companion to any 2.1*5.5mm female power jack. Whether you need to hook up to an Arduino/Geekduino Board, a Female Pigtail Lead or the AX/MX Power Hub, this cable has you covered. The tail is 10" long and splits easily.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Experimenters Nut and Bolt Pack Experimenter, kit, Nut, Bolt, Pack, variety, assortment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Price: $9.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                    RobotGeek Item #: ASM-EXP-NBP -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Need more Nuts, Bolts, and Standoffs? The Experimenter's Nut and Bolt Pack has your back! This is the same assortment of small hardware you would find in the Basic Experimenter's Kit, made available as a standalone pack for your convenience! Kit Contents 125 M3x6 Bolts 70 x M3x10 FF Standoffs 10 x M3x15 MF Standoffs 10 x M3x20 FF Standoffs 10 x M3x30 FF Standoffs 4 x M3 L-Brackets ...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Mini Bread Board
                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Price: $2.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Seeed Studio Item #: SS-STR118C2M -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Whether you're using it to prototyping tiny circuits, or daisy-chaining hundreds of them together, the Mini Bread Board is a great tool to have around. With it's tiny form factor, you can keep a couple in your car, your overnight bag, or just about anywhere life might take you. This breadboard also has an adhesive backing. This, combined with it's size, makes it a great last-minute junction for cabling on any project with a due date. Just press thie breadboard on your project, finish your...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                        RobotGeek RCA Board RobotGeek, RCA, Board, phono, cinch, tv, a/v, jack, connector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Price: $5.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                        RobotGeek Item #: ASM-RG-RCA -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Wish you could display visual elements of your project on a standard television? Unleash your vision on the screen with the RobotGeek RCA Board! This board will allow you to hook your Arduino up to any screen with a standard RCA Jack! With another board, you can output video and sound. This is a slick way to show off sensor readings, and can even be used to make rudimentary game consoles! As with all RobotGeek sensors, the hole mounting pattern is on a 1x1 CM grid so they easily mount to the...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                          RX-24F/RX-28 Gear Set RX-28, RX-24F, Gear, Set, replacement, dynamixel, robotis, bioloid
                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Price: $29.90
                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Robotis Co. Item #: RO-903-0088-000 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ** DESCRIPTION - This gear set is compatible with DX-117, RX-10, RX-24F, RX-28. - Made with metal and special coated to strengthen endurance. ** INCLUDES - Gear #1 : 1 set - Gear #2 : 1 set - Gear #3 : 1 set - Gear #4 : 1 set - Wheel Gear : 1 set - Grease : 1 set ** VIDEO ...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                            RX-64 Gear Set RX-64, Gear, Set, replacement, dynamixel, robotis, bioloid
                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Price: $43.90
                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Robotis Co. Item #: RO-903-0090-000 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ** DESCRIPTION - This gear set is for the RX-64 N1 and N101 Type. - Made with metal and special coated to strengthen endurance. ** INCLUDES - Gear #1 : 1 set - Gear #2 : 1 set - Gear #3 : 1 set - Gear #4 : 1 set - Wheel Gear : 1 set ...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                              MX-28 Gear /Bearing Set dynamixel, robot servo, mx series, mx-28, mx-28 servo, robotis, dynamixel servo, gear set, gears
                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Price: $32.90
                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Availability: Back Order
                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Robotis Co. Item #: RO-903-0196-001 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                With the MX-28 Gear / Bearing Set you can replace worn or damaged gears in your DYNAMIXEL MX-28. Each gear is metal and has a special coating to increase endurance and durability. The Wheel gear also has a built in magnet, which is crucial to the magnetic encoder in the servo. This kit included 5 gears, grease, 2 bearings, and a calibration adapator tool. These gears are compatible with both the MX-28T and MX-28R. They are not compatible with the RX28/RX24 servos. You will need a...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                MX-64 Gear/Bearing Set dynamixel, robot servo, mx series, mx-64, mx-64 servo, robotis, dynamixel servo, gear set, gears
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Price: $50.90
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Availability: Back Order
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Robotis Co. Item #: RO-903-0205-000 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  With the MX-64 Gear Set you can replace worn or damaged gears in your DYNAMIXEL MX-64. Each gear is metal and has a special coating to increaste endurance and durability. The Wheel gear also has a built in magnet, which is crucial to the magnetic encoder in the servo. This kit included 5 gears, grease, 1 bearing, and a calibration adapter tool. These gears are compatible with both the MX-64T and MX-64R. They are not compatible with the RX64 servos. You will need a USB2DYNAMIXELto calibrate the...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  MX-106 Gear/Bearing Set dynamixel, robot servo, mx series, mx-106 , mx-106 servo, robotis, dynamixel servo, gear set, gears
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Price: $106.90
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Robotis Co. Item #: RO-903-0206-000 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    With the MX-106 Gear Set you can replace worn or damaged gears in your DYNAMIXEL MX-106. Each gear is metal and has a special coating to increaste endurance and durability. The Wheel gear also has a built in magnet, which is crucial to the magnetic encoder in the servo. This kit included 5 gears, grease, 2 bearing, and a calibration adapter tool. These gears are compatible with both the MX-106T and MX-106R. They are not compatible with the EX-106 servos. You will need a USB2DYNAMIXELto...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Barrel Jack Female Pigtail Lead 2.1 - 5.5mm Barrel Jack Female Pigtail Lead 2.1 - 5.5mm
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Price: $2.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Item #: CS-CT5089 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Are you tired of cutting the ends off your AC to DC power supplies? Yeah, so were we. So we sourced these awesome barrel jack pigtails. Now you can quickly power up to terminal blocks or solder these to your homemade switch harnesses and not molest your power supplies. The tail is 10" long and splits easily. Yes, you are welcome.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Linear Actuator Mounting Bracket spal, linear actuator, mounting bracket
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Price: $14.25
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Item #: M-200-50-5-1577-B -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This mounting bracket will not work for Firgelli, Actuonix or Mighty Zap linear actuators and is only intended for Creative Werks linear actuators. LINEAR ACTUATOR MOUNTING BRACKET SPAL part number LA-BRACKET-110A mounting bracket kit for use with SPAL/Creative Werks LACTP series linear actuators. Bracket and mounting pad are made from billet aluminum. Includes hardware. NOTE: This is a single bracket. If you need to mount both ends of your linear actuator you will need two brackets....

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Metric Nut and Bolt Variety Pack robot nut and bolt pack, metric variety bolt pack,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Price: $19.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        InterbotiX Labs Item #: ASM-PACK-NUTBOLT -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The Metric Nut and Bolt Variety Pack is a must have for your next robot project. Combine the Nut and Bolt pack with the Standoff Variety Pack for a great jump-start on your next creation. Contents 50x M2*6mm Hex Bolts 50x M2*8mm Hex Bolts 25x M2*10mm Hex Bolts 20x M2*12mm Hex Bolts 20x M2*20mm Hex Bolts 50x M3*6mm Hex Bolts 25x M3*8mm Hex Bolts 20x M3*10mm Hex Bolts 20x M3*12mm Hex Bolts 200x M2 Nuts 200x M3 Nuts 100x Flat Washers 1 1.5mm Hex Wrench 1 2mm Hex Wrench 1 2.5mm Hex Wrench ...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Dual Linear Actuator Controller spal, linear actuator, actuator controller, wiring harness
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Price: $119.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Item #: M-200-50-5-1577-C -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            LINEAR ACTUATOR CONTROLLER KIT Creative Werks linear actuator controller kit for use with Creative Werks LACTP series linear actuators. Pushbuttons give manual control of travel and can also be programmed to move actuator to any of three determined preset positions. Indicator light shows at which of these custom presets unit is currently positioned. Once programmed the display unit can be removed and three SPST momentary switches (not included) added to make actuator move to preset positions...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Female Dean to Female Barrel Plug Cable female dean, female barrel plug, power cable, cable
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Price: $3.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Goodwell Electrical Item #: CBL-FDEANFBA -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              LiPo batteries are great for building robots, but using them to power your cralwer during development can be problamatic. Instread, use the Female Dean to Female Barrel Plug Cable to connect your robot to a DC power supply. Just plug the 2.1*5.5 female barrel jack into any of our SMPS Power supplies and the female dean connector into yor project and you'll be able to test for long streches without having to recharge your battery. Keep in mind that LiPo batteries can source alot of current, so...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Phidgets Magnetic Sensor Phidgets Magnetic Sensor, Phidgets Magnetic Sensor, Phidgets Analog Magnetic Sensor, Analog Magnetic Sensor, USB Magnetic Sensor, Phidget magnetometer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Price: $11.00
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Phidgets Inc Item #: PH-1108 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Linear Hall Effect Sensor. This ratiometric Hall-effect sensor provides a voltage output that is proportional to the applied magnetic field. Includes 60cm sensor cable. Board Dimensions: 3.0 x 3.0 cm Mounting Holes: 2.3 x 2.3 cm" This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line,...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Robot Geek Relay
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Price: $4.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                RobotGeek Item #: ASM-RG-RELAY -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Time to step up the voltage with this Arduino Relay Board. The Arduino platform is a great way to control lights, buzzers, displays and more - but what if you have a device that doesn't run on the Arduino's native 5 volts? One simple way to do it is to use the RobotGeek Relay. This little relay board will use a signal from a 5v microcontroller to make a mechanical connection. This connection is physically seprated from the arduino, meaning you can connect devices that have different voltages...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Standoff Variety Pack standoff variety pack, standoff pack
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Price: $19.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  RobotGeek Item #: ASM-PACK-STANDOFFS -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The Standoff Variety Pack will help you build just about any project. You can use these standoffs to mount boards like RobotGeek I/O boards, Arduino and Arbotix boards, or just about any board with mounting holes at least 3mm wide. You can also use standoffs to build your own robot creation - these are the same standoffs used in all of our Robot Kits! Do you need bolts for securing your standoffs? Try out the Metric Nut and Bolt Variety Pack. Contents 20x M3*10mm Female-Female Standoffs 20x...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    10 Foot Extension Wire spal, linear actuator, actuator controller, wiring harness
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Price: $25.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Item #: M-200-50-5-1577-H -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      10 FOOT EXTENSION HARNESS Creative Werks part number LA-EXTHARN. Ten foot wiring harness allows a Creative Werks 12 VDC 110 lb. linear actuator to be mounted up to ten feet away from the actuator controller. SPECIFICATIONS 10 feet long Shpg. 1/4 lb.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      10x 100mm Aluminum M3 Standoff F/F 100mm, metal, Aluminum, M3, Standoff, F/F, female to female, female, 10cm
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Price: $6.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      RobotGeek Item #: ASM-FF100 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Need to make a really tall robot? Not enough horizontal space on your workbench and you want to expand vertically? Is your Geekbot tall, but not quite imposing enough? With the 100mm Aluminum M3 Standoff F/F, you can add a whopping 10 centimeters in height to your project. Made of solid Aluminum these are light and strong, giving you a sturdy mounting point for any project! This pack includes eight Standoffs, which is enough to make your geekbot, snapper, or turret taller. ...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Phidgets Vibration Sensor Phidgets Vibration Sensor, Phidget Vibration Sensor, Vibration Sensor, Analog Vibration Sensor, USB Vibration Sensor
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Price: $11.00
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Phidgets Inc Item #: PH-1104 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Piezoelectric Vibration sensor. This sensor buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. Comes with a 60cm sensor cable. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          RobotGeek LED Driver arduino led board, arduino LED, arduino led driver,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Price: $3.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          RobotGeek Item #: ASM-RG-LEDDRIVER -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The RobotGeek LED Driver is a fast and flexible way to add LEDs to your Arduino Project. This driver board will make sure that your can drive multiple LEDs from a microcontoller without having to worry about drawing too much power directly from the microcontroller's pins. The RobotGeek LED Driver is unique because of its LED ports. Instead of having a single LED soldered into the board, there are two 2-pin female ports. This allows you to orient your LED vertically or horizontally, as well as...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            T Connector Male-Female Pair Deans, Ultra, Plug, Battery, Connector, T, Male, Female
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Price: $2.99
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Pololu Item #: C-200-925 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              These are generic connectors similar to the popular Deans Ultra Plug connectors. They are sold as matching male-female pairs and have a current rating of 50 A. Perfect for use in high current draw applications and one of the most widely used connector types for Lithium Polymer (LiPo) Battery Packs.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              10x 100mm Aluminum M3 Standoff M/F 100mm, metal, Aluminum, M3, Standoff, M/F, male to female, male, female, extension
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Price: $6.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              RobotGeek Item #: ASM-MF100 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Need to make a really tall robot? Not enough horizontal space on your workbench and you want to expand vertically? Is your Geekbot tall, but not quite imposing enough? With the 100mm Aluminum M3 Standoff M/F, you can add a whopping 10 centimeters in height to your project. Made of solid Aluminum these are light and strong, giving you a sturdy mounting point for any project! This pack includes eight Standoffs, which is enough to make your geekbot, snapper, or turret taller. With the male end,...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ArbotiX Commander v2.0 Kit arbotix, robot controller, robocontroller, arbotix commander, arduino gamepad
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Price: $59.95
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                InterbotiX Labs Item #: ASM-ARBX-CMD-V2 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The ArbotiX Commander v2.0 is an Arduino compatible, open-source XBEE-wireless hand-held controller built specifically for controlling ArbotiX/NUKE powered walking robots (but it can be interfaced to virtually any microcontroller or PC). This gamepad style controller comes ready to be setup with the ArbotiX Robocontroller. The ArbotiX Commander v2.0 was meant to be hacked, modified, upgraded, and otherwise tinkered with, and uses a simple serial protocol to interface with other Xbee enabled...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  DYNAMIXEL Pro FRP42-A110K Adaptor
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Price: $35.00
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Availability: Special Order
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Robotis Co. Item #: RO-903-0219-100 -

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This is an optional adapter frame for DYNAMIXEL Pro servos using the 42 mm2 form factor. The servo adapter is made from aluminum for high strength and durability. Package Contents 1 x FRP42-A110K Frame Adapter (Black) 20 x M3-8mm SHCS (Hex Wrench Bolt) This adapter works with the following servos: DYNAMIXEL PRO L42-10-S300-R Robot Actuator DYNAMIXEL PRO M42-10-S260-R Robot Actuator DYNAMIXEL PRO H42-20-S300-R Robot Actuator Dimensional drawing and 3D models of the DYNAMIXEL Pro frame hinges...