Panel Mount Dual Power Cable arduino panel mount jack, panel mount power cable
Price: $6.95
Availability: In Stock
Goodwell Electrical Item #: CBL-RBPLUG -

    This Panel Mount Dual Power Cable is great for adding a external jack to any Arduino enclosure like the Project Box For Arduino. This cable splits from the single female DC jack (2.1*5.5mm) into a male DC jack (also 2.1*5.5) as well as two .1"/2.54mm pitch female jumper cables. The male DC jack will plug into most Arduino boards, leaving the extra power cables available for motors, relays, and more!

    RobotGeek Voltage Divider RobotGeek Voltage Divider, Robot Geek Voltage Divider, Voltage Divider, FSR Voltage Divider, Force Sensitive Resistor Voltage Divider, FSR Interface, FSR Analog Interface
    Price: $4.95
    Availability: In Stock
    RobotGeek Item #: ASM-RG-VOLTDIV -

      The RobotGeek Voltage Divider is a simple yet effective way to turn a variable resistor, such as an FSRs, Softpots, or Pressure Sensors into a tunable 0-5v analog signal. The design is super simple and completely open source, but saves tinkerers from having to breadboard a potentiometer of their own. A 2 position terminal block and 0.1" spaced header are available for sensor input, a 3 pos right angle header breaks out Analog output, 5v input, and Gnd. Each sensor includes necessary...

      Ultra Sonic Range Measurement Module Ultra Sonic Range Measurement Module
      Price: $15.00
      Availability: Back Order
      Seeed Studio Item #: SS-SEN136B5B -

        This is a non-contact distance measurement module designed for easy use. Features Detecting range: 3cm-4m Best in 30 degree angle Electronic brick compatible interface 5VDC power supply Breadboard friendly Dual transducer Arduino library ready Product WIKI Page. ...

        DYNAMIXEL Pro 42 Series FRP42-H120K Hinge
        Price: $90.60
        Availability: Special Order
        Robotis Co. Item #: RO-903-0217-100 -

          This is an optional hinge frame for DYNAMIXEL Pro servos using the 42 mm2 form factor. The servo hinge frame is made from aluminum for high strength and durability. Package Contents 1 x FRP42-H120K Frame Hinge (Black) 20 x M3-8mm SHCS (Hex Wrench Bolt) A DYNAMIXEL Pro idler is required when assembling this hinge frame to the servo. This hinge frame is compatible with the DYNAMIXEL PRO H42-20-S300-R Robot Actuator Dimensional drawing and 3D models of the DYNAMIXEL Pro frame hinges and adapters...

          FSR Kit Combo
          Price: $32.25
          Availability: In Stock
          RobotGeek Item #: KIT-S-20-1000-FSRKT -

            This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

            .2 Inch FSR Kit force sensor
            Price: $14.35
            Availability: In Stock
            RobotGeek Item #: KIT-S-20-1000-FSRKT2 -

              This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

              4X DC-DC Converter - 3A 5V Mini BEC ( UBEC ) 4X, DC, Converter, 3A, 5V, Mini, BEC, UBEC, voltage, regulator
              Price: $4.95
              Availability: In Stock
              Banggood Item #: BG-MINIBEC -

                A BEC (battery elimination circuit) is a great tool for getting a lower voltage from a higher voltage system. For example, say you needed 5v to drive a Mini Turbo Fan on your 7.4v Hovercraft, but you didn't want to add a secondary battery just for the 5v fan. Simply plug this BEC into your Hovercraft's battery and you'll get a stable 5v 3A power supply. The 4X DC-DC Converter - 3A 5V Mini BEC is a small and lightweight UBEC, featuring a High efficiency switch mode design that provides better...

                DYNAMIXEL Pro FRP42-H110K Hinge
                Price: $90.60
                Availability: Special Order
                Robotis Co. Item #: RO-903-0216-100 -

                  This is an optional hinge frame for DYNAMIXEL Pro servos using the 42 mm2 form factor. The servo hinge frame is made from aluminum for high strength and durability. Package Contents 1 x FRP42-H110K Frame Hinge (Black) 20 x M3-8mm SHCS (Hex Wrench Bolt) A DYNAMIXEL Pro idler is required when assembling this hinge frame to the servo. This hinge frame is compatible with the DYNAMIXEL PRO H42-20-S300-R Robot Actuator. Dimensional drawing and 3D models of the DYNAMIXEL Pro frame hinges and adapters...

                  DYNAMIXEL Pro FRP42-I110K Idler Bearing
                  Price: $58.90
                  Availability: Special Order
                  Robotis Co. Item #: RO-902-0083-000 -

                    This is an optional idler for DYNAMIXEL Pro servos using the 42 mm2 form factor. The idler is made from aluminum for high strength and durability. Package Contents 1 x FRP42-I110K Idler (Black) 6 x M3-10mm FHS (Flat Headed Bolt) 20 x M3-8mm SHCS (Hex Wrench Bolt) This idler is compatible with the following DYNAMIXEL servos: DYNAMIXEL PRO L42-10-S300-R Robot Actuator DYNAMIXEL PRO M42-10-S260-R Robot Actuator DYNAMIXEL PRO H42-20-S300-R Robot Actuator Dimensional drawing and 3D models of the...

                    .5 Inch FSR Kit force sensor
                    Price: $14.95
                    Availability: In Stock
                    RobotGeek Item #: KIT-S-20-1000-FSRKT5 -

                      This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

                      2.1/5.5mm Jack to 2.5/5.5mm Plug Adapter 2.1/5.5mm Jack to 2.5/5.5mm Plug Adapter
                      Price: $3.95
                      Availability: In Stock
                      Top Power Co Item #: POW-plug-adapter -

                        This is an adapter that converts a 2.1/5.5mm Jack into a 2.5/5.5mm Plug. This will adapt our 2.1/5.5mm plug power supplies into a 2.5/5.5mm plug.

                        1.5 Inch FSR Kit force sensor
                        Price: $16.25
                        Availability: In Stock
                        RobotGeek Item #: KIT-S-20-1000-FSRKT15 -

                          This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

                          Clear Silicone Tubing 3.5mm clear silicone tubing, food tubing, food safe tubing, silicone tube, safe clear tube, clear tube, clear tubing, food, safe
                          Price: $19.95
                          Availability: In Stock
                          RobotGeek Item #: RAW-TUBING -

                            If you're looking for a food safe silicone tube solution for our DC Liquid Pump or Water Valve, or a better alternative to standard US 1/8" tubing? We've got it! Our silicone tubing comes in 10 meter rolls! We've sourced this tubing to make sure that it easily fits onto our pump and solenoid, but it still strong enough to stay on.Please note, our silicone tubing is not rated by the FDA or USDA.

                            Seeeduino Mega Seeeduino, V2.2, Atmega 328P, duemilanove, freeduino, arduino, diecimila, mega
                            Price: $49.50
                            Availability: In Stock
                            Seeed Studio Item #: SS-ARD121D2P -

                              Overview Seeeduino Mega is a microntrolller board based on ATmega1280, derived from Arduino Mega with changes in pursuit for small form factor, flexibility and functionality.It has 70 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with...

                              24 Inch Strip FSR Kit force sensor
                              Price: $26.00
                              Availability: In Stock
                              Interlink Item #: KIT-S-20-1000-FSRKT24 -

                                This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

                                DYNAMIXEL Pro FRP54-A110K Adaptor
                                Price: $37.10
                                Availability: Special Order
                                Robotis Co. Item #: RO-903-0218-100 -

                                  This is an optional adapter frame for DYNAMIXEL Pro servos using the 54 mm2 form factor. The servo adapter is made from aluminum for high strength and durability. Package Contents 1 x FRP54-A110K Frame Adapter (Black) 20 x M3-8mm SHCS (Hex Wrench Bolt) This versatile adapter is compatible with the following DYNAMIXEL servos: DYNAMIXEL PRO L54-30-S400-R Robot Actuator DYNAMIXEL PRO L54-50-S290-R Robot Actuator DYNAMIXEL PRO M54-40-S250-R Robot Actuator DYNAMIXEL PRO M54-60-S250-R Robot Actuator...

                                  Gravity Mounting Kit Gravity, Mounting, Mount, Mounts, Kit, DFRobot, series, acrylic, hardware
                                  Price: $6.99
                                  Availability: In Stock
                                  RobotGeek Item #: ASM-DF-GRAVITY-MNT -

                                    The Gravity Mounting Kit is your key to firmly affixing Sensors in DFRobot's Gravity Series to your RobotGeek Workbench or Geekbot! Each Kit comes with 3 Adapter Plates and all the hardware you'll need to mount 3 sensors. DFRobot's Gravity Series Sensors work well with the RobotGeek Sensor Shield, Sharing the same 3-pin headers as RobotGeek Sensors. With these plates, Gravity Sensors mount in the same way as RobotGeek Sensors, making for a well integrated system! ...

                                    DYNAMIXEL Pro FRP54-H210K Hinge
                                    Price: $120.00
                                    Availability: Special Order
                                    Robotis Co. Item #: RO-903-0222-000 -

                                      This is an optional hinge frame for DYNAMIXEL Pro servos using the 54 mm2 form factor. The servo hinge frame is made from aluminum for high strength and durability. Package Contents 1 x FRP54-H210K Frame Hinge (Black) 1 x FRP54-H030 Spacer 20 x M3-8mm SHCS (Hex Wrench Bolt) A DYNAMIXEL Pro idler is required when assembling this hinge frame to the servo. This servo hinge frame is compatible with the DYNAMIXEL PRO H54-200-S500-R Robot Actuator. Dimensional drawing and 3D models of the DYNAMIXEL...

                                      DYNAMIXEL Pro FRP54-H220K Hinge
                                      Price: $120.00
                                      Availability: Special Order
                                      Robotis Co. Item #: RO-903-0223-000 -

                                        This is an optional hinge frame for DYNAMIXEL Pro servos using the 54 mm2 form factor. The servo hinge frame is made from aluminum for high strength and durability. Package Contents 1 x FRP54-H220K Frame Hinge (Black) 1 x FRP54-H030 Spacer 20 x M3-8mm SHCS (Hex Wrench Bolt) A DYNAMIXEL Pro idler is required when assembling this hinge frame to the servo. This servo hinge frame is compatible with the DYNAMIXEL PRO H54-200-S500-R Robot Actuator. Dimensional drawing and 3D models of the DYNAMIXEL...

                                        Grove Mounting Kit grove mounting kit sensors mount
                                        Price: $7.95
                                        Availability: In Stock
                                        RobotGeek Item #: ASM-GROVE-MOUNT -

                                          The Grove Mounting Kit is great solution to bring Grove sensors into the RobotGeek realm. Each sensor mount conforms to the centimeter grid pattern, making it mountable on workbenches, Geekbots, PhantomX Hexapod top decks- anything that follows the centimeter grid!The kit includes 8x small mounts (Grove two-hole sensors) and 4x large mounts Grove three-hole sensors), M3x6mm bolts, M2x6mm bolts, M2mm nuts and M3x10mm F/F stand-offs.*RobotGeek workbench pictured sold separately.   ...

                                          Serial Bluetooth Upgrade Kit (Android Compatible) Serial, Bluetooth, BT, interbotix, robotgeek, Upgrade, Kit, Android, module, communication, radio, phone, tablet, controller
                                          Price: $19.95
                                          Availability: In Stock
                                          RobotGeek Item #: ASM-HC-05-BT -

                                            Want to control your Commander compatible robot using your Android powered cellphone or tablet? The Bluetooth Upgrade Kit is the solution for you. By attaching this upgrade kit to serial, you can control your robot in style using the BT Commander App! Designed with InterbotiX and RobotGeek robots in mind, this is a fantastic solution for controlling your Hexapod MK-III, or taking command of your Geekbot! Kit Includes: 1x - HC-05 Serial Bluetooth Module 1x - Centimeter Grid Mounting Plate 1x -...

                                            DYNAMIXEL Pro FRP54-H120K Hinge
                                            Price: $98.20
                                            Availability: Special Order
                                            Robotis Co. Item #: RO-903-0215-100 -

                                              This is an optional hinge frame for DYNAMIXEL Pro servos using the 54 mm2 form factor. The servo hinge frame is made from aluminum for high strength and durability. Package Contents 1 x FRP54-H120K Frame Hinge (Black) 20 x M3-8mm SHCS (Hex Wrench Bolt) A DYNAMIXEL Pro idler is required when assembling this hinge frame to the servo. This servo hinge frame is compatible with the following DYNAMIXEL actuators: DYNAMIXEL PRO L54-30-S400-R Robot Actuator DYNAMIXEL PRO L54-50-S290-R Robot Actuator...

                                              DYNAMIXEL Pro FRP54-H110K Hinge
                                              Price: $98.20
                                              Availability: Special Order
                                              Robotis Co. Item #: RO-903-0214-100 -

                                                This is an optional hinge frame for DYNAMIXEL Pro servos using the 54 mm2 form factor. The servo hinge frame is made from aluminum for high strength and durability. Package Contents 1 x FRP54-H110K Frame Hinge (Black) 20 x M3-8mm SHCS (Hex Wrench Bolt) A DYNAMIXEL Pro idler is required when assembling this hinge frame to the servo. This servo hinge frame is compatible with the following DYNAMIXEL actuators: DYNAMIXEL PRO L54-30-S400-R Robot Actuator DYNAMIXEL PRO L54-50-S290-R Robot Actuator...

                                                Robot Geek Sharp IR Sensor Mount
                                                Price: $3.95
                                                Availability: In Stock
                                                RobotGeek Item #: ASM-IRSMOUNT -

                                                  The Robot Geek Sharp IR Sensor Mount allows you to mount a Sharp IR distance sensor on a 9g servo or on standoffs to mount on Robot Geek kits. The mount conforms to the Robot Geek 1 X 1 CM grip pattern allowing you to have extreme flexibility in mounting your IR range sensors.The Mounting Kit comes with: 2 X M3*10 F/F Standoffs 2 X M3*20 F/F Standoffs 2 X M3*30 F/F Standoffs 2 X M3*15 M/F Standoffs Necessary nuts, bolts, and mounting plates ...

                                                  DYNAMIXEL Pro FRP54-I110K Idler Bearing
                                                  Price: $65.90
                                                  Availability: Special Order
                                                  Robotis Co. Item #: RO-902-0082-000 -

                                                    This is an optional idler for DYNAMIXEL Pro servos using the 54 mm2 form factor. The idler is made from aluminum for high strength and durability. Package Contents 1 x FRP54-I110K Idler (Black) 6 x M3-10mm FHS (Flat Headed Bolt) 20 x M3-8mm SHCS (Hex Wrench Bolt) This idler is compatible with the following DYNAMIXEL servos: DYNAMIXEL PRO L54-30-S400-R Robot ActuatorDYNAMIXEL PRO L54-30-S500-R Robot Actuator DYNAMIXEL PRO L54-50-S290-R Robot Actuator DYNAMIXEL PRO M54-40-S250-R Robot Actuator...

                                                    RobotGeek IR Receiver RobotGeek, IR, infrared, Receiver, infra, red
                                                    Price: $6.95
                                                    Availability: In Stock
                                                    RobotGeek Item #: ASM-RG-IRRECEIVER -

                                                      Want a simple untethered control solution for your next project? The RobotGeek IR Receiver has you in its line of sight! This infrared receiver will pick up signal from any remote that sends an infrared signal, or can receive from another ~duino sending signals with the RobotGeek IR Transmitter! As with all RobotGeek sensors, the hole mounting pattern is on a 1x1 CM grid so they easily mount to the RobotGeek Workbenches or any other RobotGeek kit. Each sensor includes a mounting plate and all...

                                                      RobotGeek IR Transmitter RobotGeek, IR, infrared, Transmitter
                                                      Price: $5.95
                                                      Availability: In Stock
                                                      RobotGeek Item #: ASM-RG-TRANSMITTER -

                                                        Want your next project to send a clear signal? The RobotGeek IR Transmitter can send data to various devices in your sights! Use it to control your TV, or send signals to another ~duino outfitted with a RobotGeek IR Receiver! As with all RobotGeek sensors, the hole mounting pattern is on a 1x1 CM grid so they easily mount to the RobotGeek Workbenches or any other RobotGeek kit. Each sensor includes a mounting plate and all hardware needed to mount to any workbench or RobotGeek product that has...

                                                        RobotGeek Webcam with Mounts webcam, robot webcam, robot vga webcam, bioloid frame camera, bioloid webcam, bioloid camera, robot camera with mounts
                                                        Price: $29.95
                                                        Availability: In Stock
                                                        InterbotiX Labs Item #: ASM-CMRAMNT -

                                                          Have you ever needed a small, mountable camera for your robot or vision project? Then take a look at the Robot VGA Webcam with Mounts! This tiny webcam will geneate a 640x480px video at 30fps. The Robot VGA Webcam is great for robots of all types and sized, including our Robotic Arms and Turrets. The included mounting plates make attaching the camera to your robot a snap.

                                                          RobotGeek 1" Pastic Ball Caster
                                                          Price: $4.95
                                                          Availability: Back Order
                                                          RobotGeek Item #: ASM-RG-CASTER -

                                                            A simple but effective design, the Robot Geek 1-inch Ball Caster is meant to keep your mobile platform moving freely. Laser-cut Acrylic parts with an array of standoffs make assembly and mounting of various sizes easy. The 1-inch Acetal ball’s natural lubricity and resistance to moisture are advantageous to any mobile robotics platform. The total height of this ball caster is 1.1" with no spacers, you can also adjust the height by adding spacers and standoffs. Additional mounting standoffs and...

                                                            Universal IR Game-Pad IR remote, IR Controller, Infra red controller, Infra red game pad, infra red game controller
                                                            Price: $12.95
                                                            Availability: In Stock
                                                            Item #: UG-IRGAME -

                                                              The Universal IR Game-pad is a simple IR transmitter encased in a standard game-pad like design. Use to control your television or next project paired with the RobotGeek IR receiver.

                                                              GP2D12 - Sharp IR Sensor to Servo Cable
                                                              Price: $1.95
                                                              Availability: In Stock
                                                              Lynxmotion Item #: RC-IR_Cable -

                                                                This cable adapts from the JST connector found on the Sharp IR sensors to a standard 3-pin servo-style connector.  This is compatible with many robot controller boards, such as those used in the Robonova and KHR humanoids.

                                                                LifeCam Cinema Webcam - 720p HD (With Mount) Microsoft LifeCam Cinema Webcam  720p HD, HD robot camera, USB robot camera
                                                                Price: $69.95
                                                                Availability: In Stock
                                                                Microsoft Item #: ASS-CAM-H5D-00001 -

                                                                  The Microsoft LifeCam Cinema Webcam - 720p HD is a high resolution advanced USB camera, perfect for use in all robotics projects, pan/tilt robot turrets, and/or with Roborealm. It is Linux-compatible using the Linux UVC Driver.The Lifecam Cinema Webcam kit comes with all the necessary hardware to mount to any Interbotix turret as well as all RobotGeek products that feature the 1 x 1 centimeter grid pattern. Just simply remove the rubber holder from the camera using a 00 Phillips screw driver...

                                                                  RobotGeek Wii Adaptor w/ Cable
                                                                  Price: $5.95
                                                                  Availability: In Stock
                                                                  RobotGeek Item #: KIT-WIIADP -

                                                                    Add a Wii controller to your robotics project quickly and easily using our new RobotGeek Wii Adapter w/ Cable. It can be used with either the Wii NunChuk Joystick or Classic Pro Controller. Whether you've got a robot, turret, rover, or other Arduino project: adding one (or more) of the familiar and well-designed Wii controllers to your build can greatly simplify the control setup process. This item is intended for those who already have a Wii controller or plan to purchase one separately. See...

                                                                    Rubber Bumpers - Large rubber bumpers, large rubber bumpers, rubber feet, large rubber feet
                                                                    Price: $4.95
                                                                    Availability: In Stock
                                                                    RobotGeek Item #: ASM-12-RW-KSH0433 -

                                                                      Large Rubber Bumpers are great for any project! Whether you need some traction on the bottom of your project or a little more clearance for nuts bolts and wires underneath your project, these bumpers will do the job. These bumpers have an adhesive backing that makes them easy to attach to any surface. Bumpers are 20mm*20mm on the larger face (this face has the adhesive backing) , 14mm*14mm on the smaller/bottom face and 9mm tall. Each pack comes with 12 individual bumpers. ...

                                                                      UartSBee V5 (USB-Xbee-TTL Interface) USB, TTL, Xbee, Converter. V4
                                                                      Price: $24.95
                                                                      Availability: In Stock
                                                                      Seeed Studio Item #: ASM-SS-INT110B2P -

                                                                        DescriptionUartSBee v5' is FTDI cable compatible USB to Serial adapter equipped with BEE socket(20pin 2.0mm). The integrated FT232RL can be used for programming or communicating with MCUs. On the other hand, you might connect your PC to various wireless applications via a Bee compatible module. UartSBee provides breakouts for the bit-bang mode pins of FT232RL as well.This Bit-bang mode pins (8 I/O pins) can be used as a replacement for applications involving PC parallel port which is scares...

                                                                        Rubber Bumper - Small rubber bumper, small rubber bumper, rubber feet, small rubber feet
                                                                        Price: $4.95
                                                                        Availability: In Stock
                                                                        RobotGeek Item #: ASM-12-PT-RUB-BUMP^RND^005000^001400 -

                                                                          Small Rubber Bumpers are great for any project! Whether you need some traction on the bottom of your project or a little more clearance for nuts bolts and wires underneath your project, these bumpers will do the job. These bumpers have an adhesive backing that makes them easy to attach to any surface. Bumpers are 12mm in diameter on the larger face (this face has the adhesive backing) , 10mm in diameter on the smaller/bottom face and 5mm tall. Each pack comes with 12 individual bumpers. ...

                                                                          Wii Classic Controller Kit Wii, Classic, Controller, Kit, joystick, robot, geek, robotgeek
                                                                          Price: $14.95
                                                                          Availability: In Stock
                                                                          RobotGeek Item #: CON-WII-KIT -

                                                                            The Wii Classic Controller Kit is a great addition to any robotics project requiring direct control. With only 4 pins you get a total of 15 digital buttons and 4 analog inputs (2 joysticks). This is great for controlling robot movement as well as setting parameters, modes and more! Our comprehensive Getting Started Guide will show you how to hook up the board/controller and how to use our Arduino Library for the controller. A video posted by Trossen Robotics (@trossenrobotics) on Dec 2, 2015...

                                                                            Gear Motor Wheel - Single GM wheel, gear motor wheel, gearmotor wheel, acrylic wheel, robot wheel, motor wheel
                                                                            Price: $3.50
                                                                            Availability: In Stock
                                                                            RobotGeek Item #: ASM-GMW -

                                                                              Do you need a wheel for your latest rover? Try our new Gear Motor Wheels! These wheels are made of a red acrylic, wrapped in a black rubber tire. Each 9cm diameter, 1cm thick wheel has a double-flat, 7mm in diameter hole -perfect for our RG 90 Gear Motors! Just use the included hardware to attach the wheels to the motors and your robot will be rolling in no time.

                                                                              Phidgets USB Isolator phidgets, Phidgets USB Isolator, USB Isolator, Isolator
                                                                              Price: $58.25
                                                                              Availability: In Stock
                                                                              Phidgets Inc Item #: PH-3060 -

                                                                                Product Features Protects your PC from overvoltage Increases system stability Protects from overvoltages up to 1kV USB speed selectable Product Description The USB Isolator is designed to protect your PC from harmful voltage that can flow from devices attached to your PC through the USB cable. The isolator is inserted between the Phidgets board and your PC. The USB Isolator can also be used to eliminate problems caused by ground “voltage” differences between USB Host and USB...

                                                                                USB AVR Programmer USB, AVR Programmer, Arduino, Diecimila, Arduino Board, Arduino Kit, Arduino Diecimila USB IO Board, Arduino IO Board, Arduino Diecimila, Arduino Diecimila Board
                                                                                Price: $19.95
                                                                                Availability: In Stock
                                                                                Pololu Item #: PO-1300 -

                                                                                  This device is a programmer for AVR-based controllers, such as our ArbotiX Robocontroller and the 3pi robot. The programmer emulates an AVRISP v2 on a virtual serial port, making it compatible with standard AVR programming software. Two additional features help with building and debugging projects: a TTL-level serial port for general-purpose communication and a SLO-scope for monitoring signals and voltage levels. The Pololu USB AVR Programmer is an extremely compact, low-cost in-system...

                                                                                  FTDI Basic Breakout - 5V FTDI, Basic Breakout 5V, USB, TTL, Converter
                                                                                  Price: $14.95
                                                                                  Availability: In Stock
                                                                                  SparkFun Item #: SF-DEV-09716 -

                                                                                    This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be...

                                                                                    arbotiX Robocontroller Starter Kit arbotix, robot controller, starter kit, robocontroller, bioloid, ax-12, robotis, ax-12+
                                                                                    Price: $125.95
                                                                                    Availability: In Stock
                                                                                    Vanadium Labs Item #: KIT-C-400-arbotiXv1-Starter -

                                                                                      The arbotiX Robocontroller Starter Kit provides everything you need to get started with this powerful new robotics controller. Do you want to free your robot of wires? Send sensory data back to your PC? Control your robot from up to 300 feet away without having to worry about interference issues inherit in most 2.4ghz technology? XBee technology is the answer. From simply 'cutting' your serial cable, to creating a wireless mesh network perfect for swarm robotics, you can take your robotics...

                                                                                      AX/MX DYNAMIXEL Servo Manager Kit AX Dynamixel Manager, Dynamixel Manager, Dynamixel Development Kit, MX Dynamixel Manager
                                                                                      Price: $90.95-$100.95
                                                                                      Availability: In Stock
                                                                                      Robotis Co. Item #: KIT-DXL-MGR -

                                                                                        The AX/MX DYNAMIXEL Servo Manager Kit is a perfect starting point for any serious project using the Robotis Dynamixel actuators. It contains everything needed to interface AX & MX-T series servos with the USB2Dynamixel, including power/hub breakouts, and a cable pack. This kit provides access to the Dynamixel API, Roboplus Dynamixel Wizard for firmware updates, recovery, and an easy to use UI to configure & test servo attributes. A must have option for any serious Dynamixel developer!...

                                                                                        SMPS2Dynamixel Adapter robotis usb2dynamixel, usb2dynamixel
                                                                                        Price: $4.90
                                                                                        Availability: In Stock
                                                                                        Robotis Co. Item #: RO-902-0034-000 -

                                                                                          DESCRIPTION This device provides power from the SMPS to the dynamixel. Connect the SMPS(for CM-5) to the DC terminal and connect the dynamixel using the cable. There are two 3P connector for AX series and two 4P connector for DX/RX series mounted on the SMPS2Dynamixel. The power line and communication line are all connected making it capable of becoming the role of the dynamixel expansion bus. When controlling the dynamixel with the USB2Dynamixel, power can be easily supplied. Can be used by...

                                                                                          CM-530 Robotis Servo Controller CM-530, Robotis CM-530, CM530, Bioloid controller, bioloid cm-530
                                                                                          Price: $99.90
                                                                                          Availability: In Stock
                                                                                          Robotis Co. Item #: RO-902-0062-000 -

                                                                                            ** DESCRIPTION - CM-530 is a controller that includes a CPU, TTL communication board, status LED, input button, GP I/O port. - Compatible with the AX and MX series - Supports Bluetooth and zigbee communication - Connects via PC and USB comm. ** NOTICE - External design modified for compatibility with OLLO, BIOLOID STEM (coming soon), and BIOLOID PREMIUM. ** INCLUDES Description Qty Controller CM-530 1 Downloader Mini USB Cable 1 ** H/W SPECS Product Name CM-530 Weight 54g CPU ARM Cortex...

                                                                                            CM-700 Robotis Servo Controller CM-700, Robotis, Servo, Controller, Dynamixel, Bioloid
                                                                                            Price: $119.90
                                                                                            Availability: In Stock
                                                                                            Robotis Co. Item #: RO-902-0023-000 -

                                                                                              Description The CM-700 is a new robotis controller with an onboard programmable CPU, simultaneous TTL / RS485 (that means AX-12/18 servos and DX/RX/EX servos on the same bus) communication circuit, and ZIG-110 connector. CM-700 SUB Board is composed of a power department, connector department, switch, and an additional circuit for 5 pin peripheral devices. Please note: The CM-700 requires an LN-101 USB Downloader to program it. Includes: - CM-700 - Power Cable - Mounting Hardware Manual CM-700...

                                                                                              LN-101 USB Downloader LN-101, USB, Downloader, Ollo, CM-510, CM-100, CM-700
                                                                                              Price: $14.90
                                                                                              Availability: In Stock
                                                                                              Robotis Co. Item #: RO-902-0041-000 -

                                                                                                Description The LN-101 USB Downloader provides the required programming interface to a PC, enabling programs to be downloaded to the CM-100, CM-510, and CM-700. Includes: - LN-101 - Cable Manual LN-101 USB Downloader Manual ...

                                                                                                OpenCM9.04-C OpenCM9.04-B, OpenCM9.04-C, Dynamixel, Robotis
                                                                                                Price: $19.90
                                                                                                Availability: In Stock
                                                                                                Robotis Co. Item #: RO-902-0084-040 -

                                                                                                  The Open CM9.04 C is an open source micro-controller from ROBOTIS powered by the 32-bit ARM Cortex-M3 processor. Any 3-pin DYNAMIXEL servo using the TTL communication protocol can be used with the OpenCM9.04-C. With plenty of processing power, this controller is a great choice for robot building using multiple servos! Each kit includes: 1 x OpenCM9.04-C micro-controller 2 x 20 pin male header row 2 x 20 pin female header row 1 x USB micro-B cable 1 x Instruction manual Program the board using...

                                                                                                  AX/MX Power Hub 3/4 view
                                                                                                  Price: $7.95
                                                                                                  Availability: In Stock
                                                                                                  InterbotiX Labs Item #: IL-4PHUB -

                                                                                                    The 6 Port RX/EX Power Hub is a must have accessory for any DYNAMIXEL user working with 4-pin servos.  The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring a breeze. However sometimes you need to split your DYNAMIXEL chain into multiple directions. Just plug a 4-Pin Dynamixel Cable from your controller to any port on the hub, and you'll have 5 ports available for DYNAMIXEL's 4-pin servos. This hub has the added benefit of 2 power breakouts. You can plug...

                                                                                                    150mm Jumper Wires M/M (Set of 10)
                                                                                                    Price: $3.95
                                                                                                    Availability: In Stock
                                                                                                    SparkFun Item #: AC-200-PRT08431 -

                                                                                                      These Jumper Wires M/M (Set of 10) are great for connecting female headers from one board to another. Combine them with FeMale Jumpers to make even longer cables! These jumpers will fit neatly into a .1" header, so they're great for bread boards. Each pack of 10 comes with cables in 5 colors. Each cable is 150mm long

                                                                                                      2.1mm DC Jack to JST
                                                                                                      Price: $2.95
                                                                                                      Availability: In Stock
                                                                                                      Seeed Studio Item #: SS-ARD101C4O -

                                                                                                        This is a 2.1mm to JST adapter for powering the Seeeduino microcontrollers directly from one of our 6v 2A power supplies.

                                                                                                        3 Pin DYNAMIXEL Cable Variety Pack 3 pin dynamixel cable variety pack, dynamixel cable pack, dynamixel cable variety pack, 3pin variety pack, 3 pin variety pack, bioloid cable pack, bioloid cables, bioloid cable variety pack
                                                                                                        Price: $49.95
                                                                                                        Availability: In Stock
                                                                                                        InterbotiX Labs Item #: KIT-CBLBIO -

                                                                                                          The 3 Pin DYNAMIXEL Cable Variety Pack is a great solution to building upon your existing, or creating a new project! The pack includes 5 different lengths of 3 pin cables- 60mm, 100mm, 150mm, 200mm, and 250mm.The 3 Pin DYNAMIXEL Cable Variety Pack is compatible with the following servos: AX-12A AX-18A AX-12W MX-28T MX-64T MX-106T ...

                                                                                                          ArbotiX-Pro Robocontroller Starter Kit ArbotiX, Pro, Robocontroller, Starter, Kit, interbotix, robot, controller, microcontroller, arduino, atmel, robotis, dynamixel
                                                                                                          Price: $199.95
                                                                                                          Availability: On Hold
                                                                                                          InterbotiX Labs Item #: KIT-PRO -

                                                                                                            Get going with the ArbotiX-Pro Robocontroller Starter Kit! This kit contains an ArbotiX-Pro Robocontroller, an AX/MX Power Hub, 10 200mm Dynamixel Compatible Cables, a USB-A to Micro cable, and a 12V 10A Power Supply. The Arbotix-Pro is a robotics subcontroller based around the STM32F103 Cortex M3 ARM cpu. It has support for both TTL or RS-485 communciation, to control AX, MX, and Dynamixel-PRO actuators from ROBOTIS. Interface to the main CPU of a robot is provided via USB, Xbee, or UART, all...

                                                                                                            Breadboard Jumper Wire - 70pcs pack Breadboard, Jumper, Wire, cable, arduino, freeduino, seeeduino
                                                                                                            Price: $7.99
                                                                                                            Availability: In Stock
                                                                                                            Seeed Studio Item #: CBL-JW-003 -

                                                                                                              Anyone who has ever worked with a bread board can tell you that the wiring can get very complicated very quickly. Keeping your wires color coded and solidly connected to your board can mean the difference between a sucessful circuit and having to tear everything down ans start from scratch. That's where the Breadboard Jumper Wire Pack comes in. These wires come in an assortment of colors and lengths and are designed for use with breadboards. The insulated wire is stranded, making it extremly...

                                                                                                              Dynamixel 60mm 4 Pin Cable 10 Pack
                                                                                                              Price: $19.42
                                                                                                              Availability: In Stock
                                                                                                              Robotis Co. Item #: RO-903-0079-000 -

                                                                                                                Electronic Brick - Touch Sensor Electronic Brick, Touch, Sensor, arduino, seeeduino, freeduino
                                                                                                                Price: $6.50
                                                                                                                Availability: In Stock
                                                                                                                Seeed Studio Item #: SS-ELB142D2P -

                                                                                                                  This is a simple touch sensor brick, it used TTP223 touch detector IC, you can use this brick to replace the traditional physical push button and add some cool elements to your project. This sensor outputs a digital 5v signal and is plug-n-play compatible with the Electronic Brick system. Yes! We can build electronics projects just as easy as piling bricks. The Arduino/Freeduino movement has made programming and physical computing easier than ever. The Electronic Brick system simplifies the...

                                                                                                                  Electronic Brick Chassis V1.1 Electronic, Brick, Chassis, V1.1, arduino, freeduino, seeeduino
                                                                                                                  Retail: $14.50
                                                                                                                  Price: $5.00
                                                                                                                  Availability: In Stock
                                                                                                                  Seeed Studio Item #: SS-ELB127E4P -

                                                                                                                    Electronic Brick Chassis is a modular 'plug n play' style dedicated Arduino, Seeeduino, and Freeduino interface shield. It breaks out your Duino's available I/O with convenient 3-pin ports and data buses. Plug in a variety of Phidgets & Electronic Brick Sensors, Inputs, Outputs, and Accessories! Yes! We can build electronics projects just as easy as piling bricks. The Arduino/Freeduino movement has made programming and physical computing easier than ever. The Electronic Brick...

                                                                                                                    JST 2 Pin Power Connector
                                                                                                                    Price: $2.95
                                                                                                                    Availability: In Stock
                                                                                                                    Seeed Studio Item #: SS-ARD110C4B -

                                                                                                                      JST 2 Pin power connector Use for making custom power supplies for the Seeeduino Boards Length:100mm

                                                                                                                      Premium Jumper Wires 140 pcs/box
                                                                                                                      Price: $9.50
                                                                                                                      Availability: In Stock
                                                                                                                      Seeed Studio Item #: CBL-JW-001 -

                                                                                                                        Keeping the wiring on your breadboard neat and clean is a must for any large scale protyping endeavor. That's where the Premium Jumper Wire Box comes in. Don't waste your precious time cutting and bending wires, just pull out the appropriatley sized one at a momen't notice! This set provides 10 different lengths varying from 3mm-125mm, in a variety of colors.

                                                                                                                        Dynamixel 100mm 4 Pin Cable 10 Pack
                                                                                                                        Price: $21.18
                                                                                                                        Availability: In Stock
                                                                                                                        Robotis Co. Item #: RO-903-0080-000 -

                                                                                                                          Dynamixel 140mm 4 Pin Cable 10 Pack
                                                                                                                          Price: $22.94
                                                                                                                          Availability: In Stock
                                                                                                                          Robotis Co. Item #: RO-903-0081-000 -

                                                                                                                            Dynamixel 180mm 4 Pin Cable 10 Pack
                                                                                                                            Price: $24.70
                                                                                                                            Availability: In Stock
                                                                                                                            Robotis Co. Item #: RO-903-0082-000 -

                                                                                                                              Dynamixel 200mm 4 Pin Cable 10 Pack
                                                                                                                              Price: $26.48
                                                                                                                              Availability: In Stock
                                                                                                                              Robotis Co. Item #: RO-903-0083-000 -

                                                                                                                                Dynamixel 240mm 4 Pin Cable 10 Pack
                                                                                                                                Price: $28.24
                                                                                                                                Availability: In Stock
                                                                                                                                Robotis Co. Item #: RO-903-0084-000 -

                                                                                                                                  AX/MX Power Hub 3/4 view
                                                                                                                                  Price: $4.95
                                                                                                                                  Availability: In Stock
                                                                                                                                  InterbotiX Labs Item #: IL-3PHUB -

                                                                                                                                    The 6 Port AX/MX Power Hub is a must have accessory for any DYNAMIXEL user. This little board is a Bioloid 6 Port Hub and a SMPS adaptor all in one! The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring a breeze. However sometimes you need to split your DYNAMIXEL chain into multiple directions. Just plug a 3-Pin Dynamixel Cable from your controller to any port on the hub, and you'll have 5 ports avaialble for DYNAMIXEL servos. This hub has the added benefit of...

                                                                                                                                    Bioloid 6-Port Cable Hub Bioloid, 6-Port, Cable, Hub, Dynamixel, Robotis, Expansion
                                                                                                                                    Price: $4.95
                                                                                                                                    Availability: In Stock
                                                                                                                                    Robotis Co. Item #: RO-903-0142-000 -

                                                                                                                                      Need to attach more AX-12+ and AX-18F Dynamixels to your latest robot project? Look no further! The Bioloid 6-Port Cable Hub allows you to take full advantage of the daisy-chain networking capabilities of the Dynamixel servos.

                                                                                                                                      60mm Bioloid Dynamixel Cable
                                                                                                                                      Price: $10.90
                                                                                                                                      Availability: In Stock
                                                                                                                                      Robotis Co. Item #: CBL-BIO65 -

                                                                                                                                        It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for, these Heavy Duty 3 Pin DYNAMIXEL Compatible Cables will get your project back up to speed in no time. These cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look...

                                                                                                                                        BattleSwitch radio controlled 10A relay
                                                                                                                                        Price: $24.99
                                                                                                                                        Availability: Back Order
                                                                                                                                        Dimension Engineering Item #: C-200-BattleSwitch -

                                                                                                                                          BattleSwitch is the larger, 10A version of the popular PicoSwitch. BattleSwitch is a relay switch that you toggle via hobby radio control gear. You can use BattleSwitch to quickly and easily control glow plugs, BattleBot weaponry and more. You can activate applications with voltage levels as high as 240VAC without having to know anything about microcontroller logic levels or transistors because the relay offers full electrical isolation from your receiver electronics. BattleSwitch plugs into a...

                                                                                                                                          Parallax (Futaba) Continuous Rotation Servo servo, servos, continuous rotation servo, continuous servo
                                                                                                                                          Price: $13.99
                                                                                                                                          Availability: In Stock
                                                                                                                                          Parallax Item #: PX-900-00008 -

                                                                                                                                            The Parallax Continuous Rotation Servo is a Futaba S148 servo. It's recommended for robotics projects and includes an adjustable potentiometer to center the servo. Servos may be controlled directly from a BASIC Stamp I/O pin by using the PULSOUT command. Servo has been modified for continuous rotation. NOTES:This continuous rotation servo only work with the following brackets: E-Z Aluminum Servo Bracket , Multi-Purpose Servo Bracket, & Aluminum Servo Bracket (may need some custom...

                                                                                                                                            Dynamixel Compatible Cables
                                                                                                                                            Price: $11.90
                                                                                                                                            Availability: In Stock
                                                                                                                                            InterbotiX Labs Item #: CBL-BIO100 -

                                                                                                                                              It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for, these Heavy Duty 3 Pin DYNAMIXEL Compatible Cables will get your project back up to speed in no time. These cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look...

                                                                                                                                              Dynamixel compatible cables
                                                                                                                                              Price: $12.90
                                                                                                                                              Availability: In Stock
                                                                                                                                              Robotis Co. Item #: CBL-BIO150 -

                                                                                                                                                It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for, these Heavy Duty 3 Pin DYNAMIXEL Compatible Cables will get your project back up to speed in no time. These cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look...

                                                                                                                                                Phidgets Dual Relay Board Phidgets Dual Relay Board, Phidget Dual Relay Board, phidgets relay board, relay board
                                                                                                                                                Price: $19.00
                                                                                                                                                Availability: In Stock
                                                                                                                                                Phidgets Inc Item #: PH-3051 -

                                                                                                                                                  The Dual Relay Board is an accessory to the PhidgetInterfaceKit 8/8/8. Each relay can be controlled by a separate Digital Output and can control open or close a circuit up to 240VAC at 5Amps. The relay board uses 1 analog input jack for it's power connection. Board Dimensions: 5.3 x 4.5 cm Mounting Holes: 4.6 x 3.8 cm This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors,...

                                                                                                                                                  200mm 3 Pin DYNAMIXEL Compatible Cables -10 Pack Bioloid 200mm Cable, Dynamixel 200mm Cable, RO-903-0078-000, 3 -pin Dynamixel, Robotis Cable, Bioloid cable, Dynamixel cable, ax-12 cable, ax-18 cable
                                                                                                                                                  Price: $13.90
                                                                                                                                                  Availability: In Stock
                                                                                                                                                  InterbotiX Labs Item #: CBL-BIO200 -

                                                                                                                                                    It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for, these Heavy Duty 3 Pin DYNAMIXEL Compatible Cables will get your project back up to speed in no time. These cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look...

                                                                                                                                                    1000mm 3 Pin DYNAMIXEL Compatible Cable - Single Cable  Bioloid 1000mm Cable, Dynamixel 1000mm Cable, RO-903-0078-000, 3 -pin Dynamixel, Robotis Cable, Bioloid cable, Dynamixel cable, ax-12 cable, ax-18 cable
                                                                                                                                                    Price: $4.95
                                                                                                                                                    Availability: In Stock
                                                                                                                                                    InterbotiX Labs Item #: CBL-BIO1000 -

                                                                                                                                                      Sometimes a standard length cable is just too short. You just need cables for your latest custom creation, and a 250mm cable is just too short for this one. Enter the 1000mm 3 Pin DYNAMIXEL Compatible Cable. This will get your project back up to speed in no time. This cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look better than ever! Specifications BIOLOID/DYNAMIXEL Compatible 1 Cable Custom...

                                                                                                                                                      1600mm 3 Pin DYNAMIXEL Compatible Cable - Single Cable  Bioloid 1600mm Cable, Dynamixel 250mm Cable, RO-903-0078-000, 3 -pin Dynamixel, Robotis Cable, Bioloid cable, Dynamixel cable, ax-12 cable, ax-18 cable
                                                                                                                                                      Price: $6.95
                                                                                                                                                      Availability: In Stock
                                                                                                                                                      InterbotiX Labs Item #: CBL-BIO1600 -

                                                                                                                                                        Sometimes a standard length cable is just too short. You just need cables for your latest custom creation, and a 250mm cable is just too short for this one. Enter the 1600mm 3 Pin DYNAMIXEL Compatible Cable. This will get your project back up to speed in no time. This cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look better than ever! Specifications BIOLOID/DYNAMIXEL Compatible 1 Cable Custom...

                                                                                                                                                        DYNAMIXEL compatible cables
                                                                                                                                                        Price: $14.90
                                                                                                                                                        Availability: In Stock
                                                                                                                                                        InterbotiX Labs Item #: CBL-BIO250 -

                                                                                                                                                          It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for, these Heavy Duty 3 Pin DYNAMIXEL Compatible Cables will get your project back up to speed in no time. These cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look...

                                                                                                                                                          350mm 3 Pin DYNAMIXEL Compatible Cable - Single Cable  Bioloid 350mm Cable, Dynamixel 250mm Cable, RO-903-0078-000, 3 -pin Dynamixel, Robotis Cable, Bioloid cable, Dynamixel cable, ax-12 cable, ax-18 cable
                                                                                                                                                          Price: $2.95
                                                                                                                                                          Availability: In Stock
                                                                                                                                                          InterbotiX Labs Item #: CBL-BIO350 -

                                                                                                                                                            Sometimes a standard length cable is just too short. You just need cables for your latest custom creation, and a 250mm cable is just too short for this one. Enter the 350mm 3 Pin DYNAMIXEL Compatible Cable. This will get your project back up to speed in no time. This cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look better than ever! Specifications BIOLOID/DYNAMIXEL Compatible 1 Cable Custom...

                                                                                                                                                            500mm 3 Pin DYNAMIXEL Compatible Cable - Single Cable  Bioloid 500mm Cable, Dynamixel 500mm Cable, RO-903-0078-000, 3 -pin Dynamixel, Robotis Cable, Bioloid cable, Dynamixel cable, ax-12 cable, ax-18 cable
                                                                                                                                                            Price: $3.95
                                                                                                                                                            Availability: In Stock
                                                                                                                                                            InterbotiX Labs Item #: CBL-BIO500 -

                                                                                                                                                              Sometimes a standard length cable is just too short. You just need cables for your latest custom creation, and a 250mm cable is just too short for this one. Enter the 500mm 3 Pin DYNAMIXEL Compatible Cable. This will get your project back up to speed in no time. This cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look better than ever! Specifications BIOLOID/DYNAMIXEL Compatible 1 Cable Custom...

                                                                                                                                                              Little Fuses for CM controllers
                                                                                                                                                              Price: $3.40
                                                                                                                                                              Availability: In Stock
                                                                                                                                                              Item #: RO-903-0178-000 -

                                                                                                                                                                These are replacement fuses for the CM-510, CM-530 and the CM-700. Each pack contains 10 fuses. Each fuse is rated at 125VAC, 10A.

                                                                                                                                                                3 pin Bioloid Servo/Sensor Cables (Set of 25) bioloid cables, bioloid servo cables, bioloid sensor cables
                                                                                                                                                                Price: $34.90
                                                                                                                                                                Availability: In Stock
                                                                                                                                                                Robotis Co. Item #: RO-903-0073-001 -

                                                                                                                                                                  This is the same set of cables that comes with the Bioloid Comprehensive Kit.  Good for all of your Bioloid sensor and servo connecting needs! Cable Length  Quantity 7.25" 4 6.5" 5 5." 6 3.5" 4 2" 6 ...

                                                                                                                                                                  Bioloid Serial Cable bioloid, serial, cable, "cm-5", robotis
                                                                                                                                                                  Price: $4.90
                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                  Robotis Co. Item #: RO-903-0001-000 -

                                                                                                                                                                    This is a replacement serial cable for communicating with the Bioloid CM-5 control module.

                                                                                                                                                                    LBS-10 11.1v Bioloid Premium Lipo Battery LBS-10, 11.1v, Bioloid, Premium, Lipo, Battery, Lithium, Polymer
                                                                                                                                                                    Price: $29.90
                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                    Robotis Co. Item #: RO-903-0143-000 -

                                                                                                                                                                      LIPO 11.1V Battery Set LBS-10 DESCRIPTION - This Li-Po battery is intended for the Bioloid Premium Kit. - PCM embedded to protect from over charge, over discharge, and excess current. INCLUDES - LIPO 11.1V Battery Set LBS-10 : 1 pc - Battery Cover : 1 spc - F60 : 1 pc - CABLE-BAT : 1 pc H/W SPECIFICATION - Voltage : 11.1V - Capacity : 1000 mAh - Discharge : 10C - Dimension : 70 x 35 x 15 - Weight : 83g - PCM embedded to protect from over charge, over discharge, and excess current. WARNING - Do...

                                                                                                                                                                      Li-ion Battery 3.7 V 1300 mAh LB-040
                                                                                                                                                                      Price: $9.90
                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                      Robotis Co. Item #: RO-903-0220-000 -

                                                                                                                                                                        The LB-040 3.7 V 1300 mAh lithium-ion battery is designed for use with the LBB-040 lithium-ion charger kit. It is primarily intended for use with the DARWIN MINI humanoid robot from ROBOTIS, but it can be used with any project using a OpenCM9.04 or CM-150 controller. This battery is rated at 3.7 V and has a 1300 mAh capacity. The battery weighs 50 g and is 24 x 27 x 70 mm. Each package contains: 1 x LB-040 Li-ion Battery The built-in protection circuit module prevents overcharge, total...

                                                                                                                                                                        Li-ion Battery Charger Set LBB-040 Photo
                                                                                                                                                                        Price: $6.90
                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                        Robotis Co. Item #: RO-903-0221-000 -

                                                                                                                                                                          The LBB-040 lithium-ion charger is designed for use with the ROBOTIS LB-040 3.7 V battery. This set has both a USB micro connector for charging your battery and a detachable 2P cable for powering your robot. When fully charged the red LED next to the USB port will turn off. For best results wait until the battery has cooled down before recharging. This charger is compatible with the OpenCM9.04 and CM-150 controller. Each set contains: 1 x Li-ion Battery Charger 1 x USB Micro B Cable 1 x 100 mm...

                                                                                                                                                                          9.6V - 2.3Ah Battery for Bioloid bioloid battery
                                                                                                                                                                          Price: $29.90
                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                          Robotis Co. Item #: RO-903-0129-000 -

                                                                                                                                                                            Need a spare battery for your Bioloid? Well, here it is! Nominal Voltage 9.6 V Capacity 2300 mAh

                                                                                                                                                                            OLLO IR Sensor OLLO IR Sensor
                                                                                                                                                                            Price: $5.95
                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                            Robotis Co. Item #: RO-902-0039-000 -

                                                                                                                                                                              OLLO IR sensor is for object detection or line following. Specifications Dimensions: 24 x 18 x 12mm Weight: 4g Compatible with: CM-100, CM-510 Cable Included

                                                                                                                                                                              Phidgets SSR Relay Phidgets SSR Relay, Phidgets Relay Board, Phidget SSR Relay, Phidget Relay Board
                                                                                                                                                                              Price: $15.00
                                                                                                                                                                              Availability: Back Order
                                                                                                                                                                              Phidgets Inc Item #: PH-3052 -

                                                                                                                                                                                The Solid State Relay is used to switch up to 2.5 Amps at up to 40 Volts DC, or 28 Volts AC. The relay board is controlled by a digital output on the PhidgetInterfaceKit 8/8/8, the PhidgetTextLCD 8/8/8, or the PhidgetRFID v2.0 and greater. Product Manual This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire...

                                                                                                                                                                                PicoSwitch PWM Controlled Relay io board, switch
                                                                                                                                                                                Price: $19.99
                                                                                                                                                                                Availability: Back Order
                                                                                                                                                                                Dimension Engineering Item #: C-200-PICO -

                                                                                                                                                                                  Product Description PicoSwitch is a relay switch that you toggle via hobby radio control gear. You can use PicoSwitch to quickly and easily control anything from a digital camera shutter to an electric squirt gun to home lighting and more. You can activate applications with voltage levels as high as 125VAC without having to know anything about microcontroller logic levels or transistors because the relay offers full electrical isolation from your receiver electronics. PicoSwitch plugs into a...

                                                                                                                                                                                  ZIG2Serial
                                                                                                                                                                                  Price: $14.90
                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                  Robotis Co. Item #: RO-902-0033-000 -

                                                                                                                                                                                    The Robotis Zig2Serial adapter allows you to control your Bioloid wirelessly from a computer.  This adapter does not include the Zig-100 module.  Zig-100 modules must be purchased separately. For more information on using the Zig2Serial adapter, download the Bioloid Expert Kit manual.  The section concerning wireless control starts on page 98. Download the Bioloid Expert Kit manual! (11 MB pdf) (The Zig2Serial adapter is part of the Bioloid Expert Kit.  It does not have a...

                                                                                                                                                                                    RC-100B Bioloid Boomerang Controller
                                                                                                                                                                                    Price: $39.90
                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                    Robotis Co. Item #: RO-902-0029-002 -

                                                                                                                                                                                      This is the long awaited Zigbee Bioloid Boomerang Controller! Finally a handheld controller solution is available for your Bioloid robot, enabling easier participation in kung-fu, soccer, and stair climbing events! Perfect for your own bot, or the perfect holiday gift for a Bioloid owner close to you! This controller does not come with a pair of Zig-100 communication units, which are required for use.Description: RC-100 is a Bioloid wireless remote controller introduced by ROBOTIS. The case is...

                                                                                                                                                                                      DMS-80 IR Distance Measurement Sensor DMS-80, Distance, Measurement, Sensor,
                                                                                                                                                                                      Price: $14.90
                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                      Robotis Co. Item #: RO-902-0043-000 -

                                                                                                                                                                                        Description Can be used to detect walls or objects within a certain range. Is not affected by color as much as normal IR sensors and can measure distance to objects Includes DMS Sensor 3P-DMS-5P-Cable Hardware Specifications Weight : 4.4g Detect Range Distance : 10 ~ 80 cm Recommended Voltage : 4.5 ~ 5.5 V Compatible Products CM-510 Robotis Controller CM-700 Robotis Controller E-Manual Documentation ...

                                                                                                                                                                                        GS-12 2-Axis Gyro Sensor GS-12, 2-Axis, Gyro, Sensor
                                                                                                                                                                                        Price: $34.90
                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                        Robotis Co. Item #: RO-902-0042-000 -

                                                                                                                                                                                          Description Can be used to measure angular velocity Can be used to calculate how much the roboti is tilted/inclined and which direction the robot is falling. Can be used to balance to robot or program applied specific motions such as get-up routines. Includes 2 Axis GS-12 Gyro Sensor 3P-DMS-5P-Cable x 2 Hardware Specifications Weight : 2.8g Dimension : 23mm * 23mm* 10mm Angular Velocity Measurement Range : -300¢ª/s ~ 300¢ª/s Recommended Voltage : 4.5 ~ 5.5 V Compatible Products CM-510 Robotis...

                                                                                                                                                                                          OLLO/BIOLOID IR Receiver ollo IR receiver, BIOLOID IR receiver, BIOLOID IR, BIOLOID control
                                                                                                                                                                                          Price: $4.90
                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                          Robotis Co. Item #: RO-902-0037-000 -

                                                                                                                                                                                            This OLLO/BIOLOID IR Receiver is the same one used in BIOLOID Premium Kits, the BIOLOID STEM Expansion Kit and the OLLO Bug Kit. This receiver is compatible with the RC-100 BIOLOID Boomerang Controller. It can be easily attached to BIOLOID and OLLO kits using OLLO rivets.

                                                                                                                                                                                            Bioloid Zigbee 100 Wireless Module Set
                                                                                                                                                                                            Price: $49.90
                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                            Robotis Co. Item #: RO-902-0026-000 -

                                                                                                                                                                                              This is a set of two (2) Robotis Zig-100 Zigbee modules.  These modules provide wireless connectivity for your Bioloid!  The Zig-100 module can be used in a number of configurations: Wireless Controller Install one Zig-100 module in your Bioloid robot's CM-5 control module. Install the second Zig-100 in another CM-5. Use the buttons on the second CM-5 to issue wireless commands to the robot's CM-5! PC to Bioloid Communication Install one Zig-100 module in your Bioloid robot's CM-5...

                                                                                                                                                                                              Bioloid Zigbee 110 Wireless Module Set
                                                                                                                                                                                              Price: $49.90
                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                              Robotis Co. Item #: RO-902-0028-000 -

                                                                                                                                                                                                This is a set of two (2) Robotis Zig-100 Zigbee modules.  These modules provide wireless connectivity for your Bioloid!  The Zig-100 module can be used in a number of configurations: Wireless Controller Install one Zig-100 module in your Bioloid robot's CM-5 control module. Install the second Zig-100 in another CM-5. Use the buttons on the second CM-5 to issue wireless commands to the robot's CM-5! PC to Bioloid Communication Install one Zig-100 module in your Bioloid robot's CM-5...

                                                                                                                                                                                                BIOLOID Wheel Set (2 Pack) bioloid tire, Bioloid Tire FP04-F18 Pair, Bioloid Wheel FP-04-17 Pair, DYNAMIXEL Wheel
                                                                                                                                                                                                Price: $3.20
                                                                                                                                                                                                Availability: Back Order
                                                                                                                                                                                                Robotis Co. Item #: KIT-RO-WHEEL-SET -

                                                                                                                                                                                                  The BIOLOID Wheel Set is a pack of wheels that are compatible with the AX series DYNAMIXEL servos. Each set comes with 2 FP04-F17 inner wheels and 2 FP04-F18 silicon tires. These wheels can be combined with the AX-12W DYNAMIXEL servos to make your own robotic rover. Compatibility List: AX-12W AX-12A AX-18A OLLO Servo Motor OLLO Geared Motor ...

                                                                                                                                                                                                  Robot Cable 3P-XL for XL-320 3 Pin XL-320 cable
                                                                                                                                                                                                  Price: $13.50
                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                  Robotis Co. Item #: RO-903-0224-000 -

                                                                                                                                                                                                    This set includes five 3-pin XL cables, designed for use with the XL-320 and Open CM 9.04-C. Each cable is 110mm in length. These cables are NOT compatible with AX/MX servos.

                                                                                                                                                                                                    Arbotix Mounting Kit arbotix mount, arbotix mounting plate, arduino mounting plate, arbotix mounting kit
                                                                                                                                                                                                    Price: $7.95
                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                    InterbotiX Labs Item #: ASS-HW-ARBOTIX-MNT -

                                                                                                                                                                                                      We held no punches in flexing our supreme engineering capabilities when designing this puppy. Seriously, look at it, it's marvelous. Flawless even. Unadulterated engineering prowess. Some might even call it a work of art. Okay, who are we kidding? It's a plastic square with some mounting holes and additional hardware. What is cool however, is that it allows you to mount an Arbotix Robocontroller to your Turtlebot or various Arbotix-needing project. It's reversible so you can tuck your Arbotix...

                                                                                                                                                                                                      1.5mm Hex Screwdriver 1.5mm precision screwdriver, 1.5mm screwdriver, 1.5mm hex driver, 1.5mm hex screwdriver, 1.5 mm
                                                                                                                                                                                                      Price: $7.95
                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                      Wiha Item #: DRV-92415 -

                                                                                                                                                                                                        German Wiha precision 1.5 Driver.

                                                                                                                                                                                                        18" x 24" 25LB Floor Mat Switch floor mat switch, pressure floor mat switch, sealed pressure floor mat switch, sealed floor mat switch, sealed floor mat
                                                                                                                                                                                                        Price: $99.95
                                                                                                                                                                                                        Availability: Back Order
                                                                                                                                                                                                        United Security Item #: US-903 -

                                                                                                                                                                                                          Floor Mat switches are great for all sorts of projects, but sometimes you need something a little more heavy-duty than our Standard Floor Mat Switches, sometimes you need a ruggedized 18" x 24" 25LB Floor Mat Switch These Floor Mats are ruggedized and waterproofed making them ideal for high traffic areas, both indoors and outdoors. The Switch Floor Mat is a perfect solution for monitoring security points, inventory, and more. The mat is most often used in security applications but it can also...

                                                                                                                                                                                                          18" x 24" 60LB Floor Mat Switch sealed pressure floor mat, floor mat, floor mat switch, pressure floor mat switch, 60lb floor mat switch, pressure switch
                                                                                                                                                                                                          Price: $105.95
                                                                                                                                                                                                          Availability: Back Order
                                                                                                                                                                                                          United Security Item #: US-903PR -

                                                                                                                                                                                                            Floor Mat switches are great for all sorts of projects, but sometimes you need something a little more heavy-duty than our Standard Floor Mat Switches, sometimes you need a ruggedized 18" x 24" 60LB Floor Mat Switch This version of the Floor Mat is pet resistant and designed to trigger at 60lbs. These Floor Mats are ruggedized and waterproofed making them ideal for high traffic areas, both indoors and outdoors. The Switch Floor Mat is a perfect solution for monitoring security points,...

                                                                                                                                                                                                            2.0mm  Hex Screwdriver 2.0mm hex screwdriver, 2.0mm hex driver, 2.0mm driver, 2.0mm hex, 2.0mm
                                                                                                                                                                                                            Price: $3.95
                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                            InterbotiX Labs Item #: DRV-H20 -

                                                                                                                                                                                                              Save yourself plenty of time and work with a driver instead of a hex key. These 2.0mm hex drivers have a nice grip and turning cap on the rear end to help you move quick. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good driver wrench that will lost a long time.

                                                                                                                                                                                                              2.5mm Hex Screwdriver 2.5mm screwdriver, 2.5mm hex screwdriver, 2.5mm hex driver, 2.5mm hex, 2.5mm driver
                                                                                                                                                                                                              Price: $3.95
                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                              InterbotiX Labs Item #: DRV-H25 -

                                                                                                                                                                                                                Save yourself plenty of time and work with a driver instead of a hex key. These 2.5mm hex drivers have a nice grip and turning cap on the rear end to help you move quick. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong driver that will lost a long time.

                                                                                                                                                                                                                3 pin Electronic Brick to 4 pin Grove converter cable (5 PCs pack) 3 pin to 4 pin adapter cable, grove to electronic brick, grove to electronic brick, convertor cable, grove to brick
                                                                                                                                                                                                                Price: $5.95
                                                                                                                                                                                                                Availability: On Hold
                                                                                                                                                                                                                Seeed Studio Item #: SEEED-ELE103C4O -

                                                                                                                                                                                                                  Description This cable is designed to make old Electronic Bricks compatible with the new base shield (Stem).

                                                                                                                                                                                                                  37D mm Metal Gearmotor Bracket Pair 37D mm Metal Gearmotor Bracket Pair, Gearmotor Bracket, Pololu, 37D mm Metal Gearmotor, Robot Bracket, Robot Motor Bracket
                                                                                                                                                                                                                  Price: $7.95
                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                  Pololu Item #: PO-1084 -

                                                                                                                                                                                                                    These light-weight brackets (under 15 g each) are specifically designed for the Pololu 37D mm metal gearmotors, such as the 19:1 metal gearmotor 37Dx52L mm and the 19:1 metal gearmotor 37Dx52L mm with 64 CPR encoder. Each bracket features seven mounting holes for M3 or #4-size screws along each edge, giving you a variety of mounting options. A total of twelve M3 screws (six for each bracket) are included for securing the motor to the bracket. NOTE: This set contains 2 brackets and DOES NOT...

                                                                                                                                                                                                                    9" x 15" 25LB Floor Mat Switch sealed pressure mat, pressure mat, pressure mat sensor, 25lb pressure mat
                                                                                                                                                                                                                    Price: $39.95
                                                                                                                                                                                                                    Availability: Back Order
                                                                                                                                                                                                                    United Security Item #: US-901 -

                                                                                                                                                                                                                      Floor Mat switches are great for all sorts of projects, but sometimes you need something a little more heavy-duty than our Standard Floor Mat Switches, sometimes you need a ruggedized 9" x 15" 25LB Floor Mat Switch These Floor Mats are ruggedized and waterproofed making them ideal for high traffic areas, both indoors and outdoors. The Switch Floor Mat is a perfect solution for monitoring security points, inventory, and more. The mat is most often used in security applications but it can also...

                                                                                                                                                                                                                      9" x 15" 60LB Floor Mat Switch floor mat switch, pressure floor mat switch, sealed pressure floor mat switch, sealed pressure mat,
                                                                                                                                                                                                                      Price: $49.95
                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                      United Security Item #: US-901PR -

                                                                                                                                                                                                                        Floor Mat switches are great for all sorts of projects, but sometimes you need something a little more heavy-duty than our Standard Floor Mat Switches, sometimes you need a ruggedized 9" x 15" 60LB Floor Mat Switch. This version of the Floor Mat is pet resistant and designed to trigger at 60lbs. These Floor Mats are ruggedized and waterproofed making them ideal for high traffic areas, both indoors and outdoors. The Switch Floor Mat is a perfect solution for monitoring security points,...

                                                                                                                                                                                                                        DC Extension Cable - 60CM dc extension cable, 60cm dc extension cable, extension cable, power extension, power extension cable, 600mm extension power cable, power cable
                                                                                                                                                                                                                        Price: $4.95
                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                        InterbotiX Labs Item #: CBL-DCMF60 -

                                                                                                                                                                                                                          This simple DC Extension Cable will help you clean up your robot's wiring and reduce wire splicing and soldering. Each cable is 60cm long and has a 2.1*5.5mm barrel jack, making it compatible with many of our power supplies and wiring harnesses.

                                                                                                                                                                                                                          Electronic Brick 3 Pin to Grove converter cable - 5 pcs pack Electronic Brick to Grove converter cable - 5 pcs pack
                                                                                                                                                                                                                          Price: $5.95
                                                                                                                                                                                                                          Availability: On Hold
                                                                                                                                                                                                                          Seeed Studio Item #: SS-ELE102C4O -

                                                                                                                                                                                                                            Grove to Electronic Brick Converter Cable - 4 Pin Buckled on Grove end - 3 Pin Buckled on Brick end - 20cm - 5 pieces in pack This cable is designed to make old Electronic Bricks compatible with the new Grove Basic Shield.

                                                                                                                                                                                                                            FTDI Cable 5V FTDI Cable 5V
                                                                                                                                                                                                                            Price: $17.95
                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                            SparkFun Item #: CBL-FTDIUSB -

                                                                                                                                                                                                                              The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated with a 0.1" pitch, 6-pin connector with the following pinout: RTS, RX, TX, 5V, CTS, GND (RTS is the green cable and GND is black). This cable has the same pinout and functionality...

                                                                                                                                                                                                                              Grove  I2C Hub Grove  I2C Hub
                                                                                                                                                                                                                              Price: $3.95
                                                                                                                                                                                                                              Availability: Back Order
                                                                                                                                                                                                                              Item #: SS-ACC53133P -

                                                                                                                                                                                                                                I2C Hub is for connecting multiple I2C devices. The connectors are compatible with the standard Grove 4 pin cables. Documentation Product Wiki Page

                                                                                                                                                                                                                                Grove - X2 Servo cable - 5 pcs Pack Grove - X2 Servo cable - 5 pcs Pack
                                                                                                                                                                                                                                Price: $5.95
                                                                                                                                                                                                                                Availability: On Hold
                                                                                                                                                                                                                                Seeed Studio Item #: SEEED-ACC12159O -

                                                                                                                                                                                                                                  Grove Universal Cable - 4 Pin Buckled on Grove end - breaks out into 2 standard male servo - 20cm - 5 pieces in pack Use this cable to connect two servo to Grove system with only 1 cable. Brilliant!

                                                                                                                                                                                                                                  Grove Universal 4 Pin Buckled 20cm Cable - 5 pcs pack Grove Universal 4 Pin Buckled 20cm Cable - 5 pcs pack
                                                                                                                                                                                                                                  Price: $4.95
                                                                                                                                                                                                                                  Availability: Back Order
                                                                                                                                                                                                                                  Seeed Studio Item #: S-ACC904530 -

                                                                                                                                                                                                                                    Grove Universal Cable - 4 Pin Buckled - 20cm - 5 pieces in pack The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove components to the Grove Basic Shield or to other Grove compatible boards for quick prototyping. ...

                                                                                                                                                                                                                                    Grove Universal 4 Pin Buckled 50cm Cable - 5 pcs pack Grove Universal 4 Pin Buckled 50cm Cable - 5 pcs pack
                                                                                                                                                                                                                                    Price: $5.95
                                                                                                                                                                                                                                    Availability: Back Order
                                                                                                                                                                                                                                    Seeed Studio Item #: S-ACC830570 -

                                                                                                                                                                                                                                      Grove Universal Cable - 4 Pin Buckled - 50cm - 5 pieces in pack The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove components to the Grove Basic Shield or to other Grove compatible boards for quick prototyping. ...

                                                                                                                                                                                                                                      Hex Key - 1.5mm Hex Key - 1.5mm
                                                                                                                                                                                                                                      Price: $1.99
                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                      Wiha Item #: HEX-15603 -

                                                                                                                                                                                                                                        These are very strong American made Hex keys. A bolt will strip out before these wrenches will. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong wrench that will lost a long time.

                                                                                                                                                                                                                                        Hex Key - 1/16 Inch Hex Key - 1/16 Inch
                                                                                                                                                                                                                                        Price: $1.99
                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                        Wiha Item #: HEX-15204 -

                                                                                                                                                                                                                                          These are very strong American made Hex keys. A bolt will strip out before these wrenches will. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong wrench that will lost a long time.

                                                                                                                                                                                                                                          Hex Key - 2.0mm Hex Key - 2.0mm
                                                                                                                                                                                                                                          Price: $1.99
                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                          Wiha Item #: HEX-15604 -

                                                                                                                                                                                                                                            These are very strong American made Hex keys. A bolt will strip out before these wrenches will. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong wrench that will lost a long time.

                                                                                                                                                                                                                                            Hex Key - 2.5mm Hex Key - 2.5mm
                                                                                                                                                                                                                                            Price: $1.99
                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                            Wiha Item #: HEX-15605 -

                                                                                                                                                                                                                                              These are very strong American made Hex keys. A bolt will strip out before these wrenches will. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong wrench that will lost a long time.

                                                                                                                                                                                                                                              Hex Key - 5/64 Inch Hex Key - 5/64 Inch
                                                                                                                                                                                                                                              Price: $1.99
                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                              Wiha Item #: HEX-15205 -

                                                                                                                                                                                                                                                These are very strong American made Hex keys. A bolt will strip out before these wrenches will. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong wrench that will lost a long time.

                                                                                                                                                                                                                                                Hex Key Variety Pack hex key variety pack, 1.5mm hex key, 2.0mm hex key, 2.5mm hex key, 3.0mm hex key, 4.0mm hex key
                                                                                                                                                                                                                                                Price: $7.95
                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                InterbotiX Labs Item #: HEX-PACK -

                                                                                                                                                                                                                                                  The Hex Key Variety Pack includes 5 essential hex keys for your assembling needs. These drivers won't strip before your bolts do! The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong hex key that will last a long time!This variety pack includes the following:1.5mm Hex Key2.0mm Hex Key2.5mm Hex Key3.0mm Hex Key4.0mm Hex Key

                                                                                                                                                                                                                                                  OLLO 5P Cable Set 4 pcs OLLO 5P Cable Set 5 pcs
                                                                                                                                                                                                                                                  Price: $11.95
                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                  Robotis Co. Item #: RO-903-0086-000 -

                                                                                                                                                                                                                                                    4 pack set of 15cm OLLO 5 pin cables. Compatible With OLLO Servo Motor OSM-10 OLLO IR Sensor OIS-10 OLLO Touch Sensor OTS-10 OLLO LED Module OLM-10 Controllers: CM-100, CM-510, CM-700

                                                                                                                                                                                                                                                    Panel Mount Squid Power Cable panel mount squid, power cable panel mount, power squid cable, panel power, dc power panel mount, dc power squid
                                                                                                                                                                                                                                                    Price: $4.95
                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                    Goodwell Electrical Item #: CBL-PSQUID -

                                                                                                                                                                                                                                                      The Panel Mount Squid Power Cable is great for adding an external jack to any Arduino enclosure like the Project Box for Arduino. This cable offers the ability to power two things at once coming from a female DC jack (2.1*5.5mm) into two pairs of positive and negative squid cables. A great solution to power your Arduino leaving you with the ability to power motors, relays and more!

                                                                                                                                                                                                                                                      Phidgets Force Sensor FSR, Force Sensing Resistor, Robot Force Sensors, Robot Pressure Sensor, Robot Touch Sensor
                                                                                                                                                                                                                                                      Price: $11.00
                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                      Phidgets Inc Item #: PH-1106 -

                                                                                                                                                                                                                                                        Force Sensor, measures up to 3 kilograms. 24 Inch cable included. With no force the resistance of this sensor is over 100K Ohm, as the force increases the resistance falls to 1K Ohm. This resistance is in a voltage divider arrangement with a 7.5K Ohm resistor. Board Dimensions: 2.8 x 3.0 cmMounting Holes: 2.0 x 2.3 cm If you are looking for a flat force sensor check out our Force Sensing Resistors! Download the data sheet This product is part of the Phidgets family! Phidgets are an easy to use...

                                                                                                                                                                                                                                                        Phillips 0 Screwdriver phillips 0 screwdriver, phillips driver, phillips screwdriver, phillips 0, 0 driver, 0 screwdriver, phillips
                                                                                                                                                                                                                                                        Price: $3.95
                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                        InterbotiX Labs Item #: DRV-PH0 -

                                                                                                                                                                                                                                                          These Phillips 0 drivers have a nice grip and turning cap on the rear end to help you move quick. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong driver that will lost a long time.

                                                                                                                                                                                                                                                          Phillips 00 Screwdriver phillips driver, phillips 00 screwdriver, phillips, phillips screwdriver, phillips 00 driver
                                                                                                                                                                                                                                                          Price: $3.95
                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                          InterbotiX Labs Item #: DRV-PH00 -

                                                                                                                                                                                                                                                            These Phillips 00 drivers have a nice grip and turning cap on the rear end to help you move quick. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong driver that will lost a long time.

                                                                                                                                                                                                                                                            Power Converter 6 in 1 Pack Barrel Jack, screw terminal, 2.1mm jack, BNC, JST 2 pin, female barrel jack, barrel jack to JST, BNC screw terminal
                                                                                                                                                                                                                                                            Price: $5.99
                                                                                                                                                                                                                                                            Availability: In Stock
                                                                                                                                                                                                                                                            Seeed Studio Item #: SS-CNE112D1P -

                                                                                                                                                                                                                                                              You don't need to go all the way to Tosche Station to pick up these Power Converters! This versatile little pack of power converters is great for all sorts of projects.The two JST ended cables (2mm pin spacing) and compatible with the Seeeduino line so they're great for connecting your Seeeduino up to your existing projects and power supplies. The screw terminals on the other four power jacks make these converters great prototyping tools. Contents 1X 2.1/5.5mm Barrel jack(female) to JST 2pin...

                                                                                                                                                                                                                                                              PowerSwitch Tail II PowerSwitch Tail, 120V relay, wall plug relay, power, switch, tail,2, ii, ac
                                                                                                                                                                                                                                                              Price: $28.95
                                                                                                                                                                                                                                                              Availability: In Stock
                                                                                                                                                                                                                                                              SparkFun Item #: SF-COM-10747 -

                                                                                                                                                                                                                                                                Want to control a standard wall outlet device with your micro controller, but don't want to mess with the high voltage wiring? This might just be the right device for you! The PowerSwitch Tail is designed to allow you to safely control an outlet device without exposing any 120VAC voltages. You can plug in any standard 120VAC 3-prong outlet to be controlled by most any microcontroller. This will work great with Arduino! The PowerSwitch Tail II improves on the original PowerSwitch Tail by...

                                                                                                                                                                                                                                                                Robot DC Gearhead Motor - 6v 180rpm w/ Encoder Robot Motor, DC Gearhead Motor, Motor Encoder, Gearhead Motor Encoder, Gearhead Motor, Robot Gearhead Motor, Robot Gearhead Motor Encoder
                                                                                                                                                                                                                                                                Price: $19.95
                                                                                                                                                                                                                                                                Availability: In Stock
                                                                                                                                                                                                                                                                InterbotiX Labs Item #: KIT-MTR-36-06-180 -

                                                                                                                                                                                                                                                                  We searched high and low to find an affordable yet high quality DC motor for robotics, and a solid start to our Robot Motors section. After a lot of trial and error, testing dozens of motors, we have found what we believe to be a solid choice for small-medium sized robots weighing 2-5 lbs. The RPM make them an ideal choice for 3-4" wheels, and with an integrated encoder you can calculate odometry data to make your robots navigate the real world. This motor includes a 6-pin 2.0mm pitch PH JST...

                                                                                                                                                                                                                                                                  RobotGeek Webcam with 250mm Gooseneck robot vga webcam with gooseneck, gooseneck, gooseneck mount, robot webcam and mount, 200mm gooseneck, robot camera, flexible hose mount
                                                                                                                                                                                                                                                                  Price: $39.95
                                                                                                                                                                                                                                                                  Availability: In Stock
                                                                                                                                                                                                                                                                  InterbotiX Labs Item #: KIT-GOOSECMRA -

                                                                                                                                                                                                                                                                    Extend your robot's vision even further with the Robot VGA Webcam with 200mm Gooseneck! This kit includes all the contents of the 200mm Gooseneck with the Robot VGA Webcam with Mounts. This gooseneck/camera pair is a great additionn to Robotic Arms like our PhantomX Reactor. This tiny webcam will geneate a 640x480px video at 30fps, making it great for basic computer vision. The included mounting hardware make attaching the gooseneck to your robot a snap. ...

                                                                                                                                                                                                                                                                    Screwdriver Variety Pack hex drivers, 1.5mm hex driver, 2.0mm hex driver, 2.5mm hex driver, phillips 0 driver, phillips 00 driver, driver variety pack
                                                                                                                                                                                                                                                                    Price: $17.95
                                                                                                                                                                                                                                                                    Availability: In Stock
                                                                                                                                                                                                                                                                    InterbotiX Labs Item #: DRV-PACK -

                                                                                                                                                                                                                                                                      These drivers have a nice grip and turning cap on the rear end to help you move quick. The average roboticist disassembles and reassembles their favorite robot 97.2 times a year. So you will want a good strong driver that will lost a long time.Included with this variety pack is the following:1.5mm Hex Screwdriver2.0mm Hex Screwdriver2.5mm Hex ScrewdriverPhillips 0 ScrewdriverPhillips 00 Screwdriver ...

                                                                                                                                                                                                                                                                      Turbo-Lock Blue Thread 10ml
                                                                                                                                                                                                                                                                      Price: $9.95
                                                                                                                                                                                                                                                                      Availability: In Stock
                                                                                                                                                                                                                                                                      Item #: 11-010 -

                                                                                                                                                                                                                                                                        Turbo Lock Anaerobic Thread Locker (Blue) (Medium Strength, Removable) Robots tend to jiggle and vibrate a lot. When they do this long enough their nuts and bolts shed like an Alabama dog in the spring. It is highly recommended to use a thread locker to prevent this from happening. Turbo Lock does a great job keeping your robots together. See our pro tip below about how to easily use it during assembly. This is a 10ml bottle, roughly twice the amount of your standard bottle of thread locker....

                                                                                                                                                                                                                                                                        XBee Wireless Communication Starter Kit
                                                                                                                                                                                                                                                                        Price: $79.95
                                                                                                                                                                                                                                                                        Availability: In Stock
                                                                                                                                                                                                                                                                        SparkFun Item #: KIT-C-200-WRL-XbeeKit -

                                                                                                                                                                                                                                                                          The Xbee Wireless Communication Starter Kit provides everything you need to harness the powerful and versatile technology of Zigbee 802.15.4 wireless communication. Do you want to free your robot of wires? Send sensory data back to your PC? Control your robot from up to 300 feet away without having to worry about interference issues inherit in most 2.4ghz technology? Zigbee technology is the answer. From simply 'cutting' your serial cable, to creating a wireless mesh network perfect for swarm...

                                                                                                                                                                                                                                                                          Phidgets Voltage Divider Phidgets Voltage Divider, Phidget Voltage Divider
                                                                                                                                                                                                                                                                          Price: $7.00
                                                                                                                                                                                                                                                                          Availability: In Stock
                                                                                                                                                                                                                                                                          Phidgets Inc Item #: PH-1121 -

                                                                                                                                                                                                                                                                            The Voltage Divider eliminates the need to connect a resistor to an analog input by putting a high precision potentiometer on the board to allow the adjustment of the 'fixed' resistor. The interface to the variable resistance sensor is a convenient terminal block. Perfect for force sensing resistors (FSR's), thermisters, photoresistors, and any other variable resistance sensors. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building...