Cables
Cables

The RobotGeek system is a platform for learning about and building your own Arduino Inventions. All of the RobotGeek hardware and electronic components are designed to be modular, allowing you to easily configure, customize, reconfigure and build your project. You can start with our RobotGeek Experimenter's Kits and Robot Kits or build your own custom project form the ground up. We even have a wide variety of open source demo code and tutorials to help you learn about programming your Arduino compatible microcontroller.

The RobotGeek System is so easy to use for three reasons: a unified mounting system, easy wiring, and the Arduino platform.

Learn More!


Show
RobotGeek 4 Pin Sensor Squid 300m 4 pin, sensor, cable, squid, data, 300m, jumper, breakout
CBL-SQUID4P
Price: $4.95 In Stock
Item #: CBL-SQUID4P -

    Sometimes you need to hook a serial/I2C device directly to your Arduino, or minimize the mess of jumper wires on your breadboard. These 4 Pin Sensor Squid 300m cables will help you do just that! On one end, you have a standard 4-pin connector (.1"/2.54mm pitch), and on the other end you have 4 single female jumper wires. You can easily position each cable exactly where you need it. Each cable is 300m in length. Comes in pack of 10 squid cables. Pair these cables with 2-pin couplers to adapt...

    USB A Male to A Male USB, A, Male, to, USB A Male
    CBL-USBA2A
    Price: $5.95 In Stock
    Item #: CBL-USBA2A -

      The USB A Male to A Male cable is a strange one. With a USB A Male plug on each end, this cable allows you to hook up USB devices in non-standard ways. If you need it, you know.

      Phidgets 12 foot Sensor Cable Phidgets 12 foot Sensor Cable, Phidget 12 foot Sensor Cable
      PH-3004
      Price: $3.00 In Stock
      Item #: PH-3004 -

        This is a 12-foot, 3-pin cable for connecting sensors to the analog inputs on the Phidgets 8/8/8 Interface Kit. This product is part of the Phidgets family! Phidgets are an easy to use set of USB-based building blocks for low cost sensing and control from your PC. A wide array of sensors, I/O devices, and controllers are available. To view the entire Phidgets product line, follow this link. Getting Started with Phidgets Phidgets Documentation: Manuals, data sheets, and tutorials for Phidgets...

        RobotGeek Sensor Cable Pack robotgeek, robotgeek sensor pack, robotgeek sensor cable pack, robotgeek cable pack, servo wire, 2 pin jumpers, sensor squid, pin couplers, jr female, y cable, variety pack
        RG-SPACK
        Price: $24.95 In Stock
        Item #: RG-SPACK -

          The Robot Geek Sensor Cable Pack will hook you up with all your sensor needs and beyond. This variety cable pack includes:3x 3 Pin Female to Female Y Cable1x 32 Foot Standard Servo Wire20x 3 Pin Sensor Cable10x 2 Pin Dual-Female Jumper Wires (300mm)10x Sensor Squids25x 2-Pin Couplers25x 3-Pin Couplers ...

          Squid Cable
          CBL-SQUID
          Price: $4.95 In Stock
          Item #: CBL-SQUID -

            Sometimes you need to hook a servo or a sensor directly to your Arduino, or minimize the mess of jumper wires on your breadboard. These Squid Sensor Cables - 10 pack will help you do just that! On one end, you have a standard 3-pin connector (.1"/2.54mm pitch), and on the other end you have 3 single female jumper wires. You can easily position each cable exactly where you need it. and are 200mm in length. Add some 3-Pin Couplers to attach these cables directly to a servo or your arduino. These...

            RobotGeek 150mm 3-pin Sensor Cable 10 pack
            CBL-JRFEM150
            Price: $4.95 In Stock
            Item #: CBL-JRFEM150 -

              RobotGeek Sensor Cables are for use with all RobotGeek sensors, shields, servos, and output devices. These cables are .1"(2.54mm) pitch and are 150mm in length with color coded wires. Add some 3-Pin Couplers to connect cables together for extension cables. These cables are also compatible with Phidgets Sensors and Electronic Brick Sensors, though they do not have the plastic buckle like traditional Phidgets/Electronic Brick Cables. ...

              Premium USB to Micro USB Charge & Sync Cable - 6ft
              CBL-USB2MICRO
              Price: $6.95 In Stock
              Item #: CBL-USB2MICRO -

                This 6ft Micro USB Cable is perfect for powering and programming controllers like the RobotGeek Geekduino

                2 Pin Dual-Female Jumper Wire - 300mm - 10pcs pack
                CBL-S-CAB103C4O
                Price: $4.50 In Stock
                Item #: CBL-S-CAB103C4O -

                  These 2 Pin Dual-Female Jumper Wire - 300mm - 10pcs pack are perfect for prototyping. Use them to run power from one breadboard rail to another, or use multiples to connect signals from one board to another. Each pack comes with 10 cables and each cable is 300mm long. The .1" pitch is great for standard breadboards.

                  Servo Cable
                  CBL-32SEN
                  Price: $12.95 In Stock
                  Item #: CBL-32SEN -

                    Our 32 Feet Standard Servo Wire is great for repairing and extending servo and sensor cables. The Futaba Black-Red-White (Ground-Voltage-Signal) color scheme will help you keep your signals straight. This cable has 24awg stranded wire and no connectors on either end.

                    2-Pin Couplers
                    S-200-2P-Coupler-25pack
                    Price: $2.95 In Stock
                    Item #: S-200-2P-Coupler-25pack -

                      You can use these 2 pin couplers to connect 2/4 pin jumper wires together and create your own extension wires. You can also use them to make modular connectors on your breadboard/protoboard so that connecting to other components is even easier. The pins on these couplers are spaced at .1"/2.54mm, so they're compatible with Electronic Brick/Phidgets sensor cables and most breadboards/protoboard. They are NOT compatible with Grove cables. ...

                      3-Pin Couplers
                      S-200-3P-Coupler-25pack
                      Price: $2.95 In Stock
                      Item #: S-200-3P-Coupler-25pack -

                        You can use these 3 pin couplers to connect 3 pin jumper wires together and create your own extension wires. This is perfect for extending analog sensors or servos! You can also use them to make modular connectors on your breadboard/protoboard so that connecting to other components is even easier. The pins on these couplers are spaced at .1"/2.54mm, so they're compatible with Electronic Brick/Phidgets sensor cables, hobby servo cables, and most breadboards/protoboard. They are NOT compatible...

                        4 Pin Sensor Cable 300mm 4 pin sensor cable, 4pin sensor cable, lcd sensor cable, lcd cable, 4pin cable, 4 pin cable, sensor cable
                        CBL-4PINSEN
                        Price: $1.95 In Stock
                        Item #: CBL-4PINSEN -

                          This standard 4 Pin Sensor Cable is 30cm long and has a .1"/2.54mm pitch, making it compatible with 4-pin sensors and shields. You can also add Pin Couplers and attach the cable to breadboards.

                          300mm 3-pin Female Sensor Cable 10 pack
                          CBL-JRFEM
                          Price: $4.95 In Stock
                          Item #: CBL-JRFEM -

                            RobotGeek Sensor Cables are for use with all RobotGeek sensors, shields, servos, and output devices. These cables are .1"(2.54mm) pitch and are 300mm in length with color coded wires. Add some 3-Pin Couplers to connect cables together for extension cables. These cables are also compatible with Phidgets Sensors and Electronic Brick Sensors, though they do not have the plastic buckle like traditional Phidgets/Electronic Brick Cables. ...

                            Sensor Y Cable - 100mm sensor Y cable, sensor splitter cable, servo y cable, servo splitter cable
                            CBL-3PF2Y
                            Price: $1.95 In Stock
                            Item #: CBL-3PF2Y -

                              The Sensor Y Cable is a great tool for splitting a single signal to multiple output boards. These cables are 100mm long and use a standard .1"/2.54mm pitch, making them compatible with RobotGeek I/O boards, Hobby servos, and breadboards. With this cable you can easily connect from a single output port on the RobotGeek Sensor Shield to a RobotGeek Relay, a RobotGeek LED Driver or a RobotGeek Buzzer. Combine this cable with 2 3-Pin Couplers to easily connect from 1 port to 2 Hobby Servos. You...