Rovers/Wheeled
Rovers/Wheeled

Show
RobotGeek Geekbot V2 Basic Kit Robot Geekbot Rover Comprehensive Kit, Robot Rover kit, Robotic Rover, basic
KIT-GEEKBOT-BASICV2
Price: $149.95 In Stock
Item #: KIT-GEEKBOT-BASICV2 -

    If you have a specific color (Red, White, Blue, or Black) of Geekbot you would like, leave a note in the comment section of your order, otherwise, we will pick one for you! Introducing the RobotGeek Geekbot V2 Basic Kit. This kit has everything you need to build a fully programmable rover robot! A panning range sensor will allow the Geekbot to do basic obstacle avoidance while LED and buzzer outputs will help tell the world where the Geekbot is going. The GeekBot Rover is a highly flexible...

    RobotGeek Geekbot V2 Core Kit RobotGeek, Geekbot, Bare Bones, Kit, Robot, Rover Kit, Robotic, rover kit, Arduino Rover, core
    ASM-GEEKBOT-COREV2
    Price: $89.95 In Stock
    Item #: ASM-GEEKBOT-COREV2 -

      If you have a specific color (Red, White, Blue, or Black) of Geekbot you would like, leave a note in the comment section of your order, otherwise, we will pick one for you! Introducing the RobotGeek Geekbot V2 Core Kit! It does not come with an arduino, and is intended for those who already have a microprocessor (such as a Geekduino) they wish to use. The Geekbot V2 Core Kit comes with the body, the battery, the wheel motors, and all the hardware you need to put it together and mount your...

      RobotGeek Geekduino Sensor Shield Kit
      KIT-RG-GEEKSHIELD
      Price: $29.95 In Stock
      Item #: KIT-RG-GEEKSHIELD -

        Everything you need to be up and running with a Geekduino and Sensor shield I/O break out board to mount to your projects. GeekduinoSensor Shield10 Robotgeek sensor cablesDuino Mounting PlateThe Robotgeek Sensor Shield breaks out the digital and analog pins into easy to use 3-pin connectors. Each connector supplies 5 volts, ground, and a signal pin. These connectors can easily be connected to RobotGeek Sensors as well as a wide variety of sensors, actuators and output...

        Pololu 3pi Robot
        PO-975
        Price: $99.95 Back Order
        Item #: PO-975 -

          The Pololu 3pi robot is a complete, high-performance mobile platform featuring two micro metal gearmotors, five reflectance sensors, an 8×2 character LCD, a buzzer, and three user pushbuttons, all connected to a C-programmable ATmega168 microcontroller. Capable of speeds exceeding 3 feet per second, 3pi is a great first robot for ambitious beginners and a perfect second robot for those looking to move up from non-programmable or slower beginner robots. For instructions on setting up and...

          RobotGeek Gun Mount Kit
          RG-GUNMOUNT
          Price: $39.95 In Stock
          Item #: RG-GUNMOUNT -

            No more need to spend hours of frustration trying to hack together an airsoft solution for your projects. We now have an out of the box solution! The mounting kit gives you everything you need to modify and power a Crosman Pulse M74DP Airsoft Gun . All you need to supply is the M74DP and a plastic bottle for the optional external BB hopper.A detailed build guide takes you though all the steps necessary to hack the M74DP and make it robot ready. The M74DP is a great lightweight airsoft...

            Robot Geek Panning Range Sensor Kit
            KIT-RG-RANGEPAN
            Price: $19.95 In Stock
            Item #: KIT-RG-RANGEPAN -

              The RobotGeek Panning Range Sensor is everything you need to add a panning Sharp IR Range sensor to your project. Combining a single IR sensor with a small servo is a common way to get add wide range sensing to a robot at a low cost.The kit includes:Sharp IR sensor (choose model from drop down)9g ServoSharp IR mounting bracket9g Servo mounting kitIR Sensor cable Panning Range Sensor Kit Assembly Guide ...

              RobotGeek Servo Mount Kit
              ASM-RG-SMP
              Price: $4.95 In Stock
              Item #: ASM-RG-SMP -

                The Servo Mount Kit provides a mounting solution for the RobotGeek Robot Servo or the RobotGeek Continuous Turn servo. The mounting plate conforms to the standard RobotGeek 1 X 1cm grid for easy mounting on any of your projects.RobotGeek Servo Mount Kit comes with: 1 X Mounting Plate 10 X M3*6 Bolts 5 X M3*15 F/F Standoffs 5 X M3*20 F/F Standoffs 5 X M3*25 F/F Standoffs 5 X M3*30 F/F Standoffs 5 X M3*15 M/F Standoffs ...

                RobotGeek Side Bracket Mount Kit
                RG-SBMOUNT
                Price: $7.95 In Stock
                Item #: RG-SBMOUNT -

                  The side bracket mount kit gives you the hardware needed to mount the RobotGeek Servo using a Side Bracket to RobotGeek Decks and Workstations. The kit comes with various length standoffs and a small and large mounting plate.1 x RobotGeek Side Bracket1 x Large Mounting Plate25 x M2*5 Bolts25 x M2*8 Bolts25 x M3*8 Bolts25 x M2 Nuts5 x M3x10 Standoff5 x M3x15 Standoff5 x M3x20 Standoff5 x M3x25 Standoff5 x M3x30 Standoff ...

                  BOE-Bot Full Kit - USB
                  PX-28832
                  Price: $169.99 Back Order
                  Item #: PX-28832 -

                    The ever-popular Boe-Bot® Robot Full Kit is now available with a USB-compatible Board of Education (BOE) - at no additional cost to the consumer! Programming the BASIC Stamp via USB is an elegant solution for laptops and newer PCs which have no serial ports (no more adapters required!). USB driver installation instructions are available for download. We're particularly proud of Andy Lindsay's new Robotics with the Boe-Bot text. The Robotics text includes 41 new activities for the Boe-Bot Robot...

                    3pi Robot Starter Kit
                    KIT-RK-WB-3PI
                    Price: $119.99 Back Order
                    Item #: KIT-RK-WB-3PI -

                      The Pololu 3pi robot is a complete, high-performance mobile platform featuring two micro metal gearmotors, five reflectance sensors, an 8×2 character LCD, a buzzer, and three user pushbuttons, all connected to a C-programmable ATmega168 microcontroller. Capable of speeds exceeding 3 feet per second, 3pi is a great first robot for ambitious beginners and a perfect second robot for those looking to move up from non-programmable or slower beginner robots. For instructions on setting up and...

                      Robot Geek 9G mount
                      ASM-9GM
                      Price: $3.95 In Stock
                      Item #: ASM-9GM -

                        This mount works with our plastic gear 9g servo and our metal gear 9g servo.The RobotGeek 9g Mount is a simple way to mount your 9g servos to any RobotGeek deck or platform. The mount and two standoffs conform to the Robot Geek 1 X 1 CM grid used in all RobotGeek kits. The standoffs in this kit are 20mm tall.If you are looking to mount a Sharp IR Range sensor on your servo check out our IR Sensor Mounting Kit! ...

                        SumoBot Robot
                        PX-27400
                        Price: $159.99 Back Order
                        Item #: PX-27400 -

                          If you think one robot is interesting, wait until you see two of them battling for control Sumo-style. The SumoBot® Robot is a competition-ready robot designed within the Northwest Robot Mini-Sumo Tournament rules. This little pusher will locate and knock its opponent right out of the ring while detecting the outside circle should an escape move be necessary. The electronics consists of a surface-mounted BASIC Stamp® 2 module and infrared sensors to detect your opponent and the edge of the...

                          SumoBot Robot Competition Kit
                          PX-27402
                          Price: $239.99 Back Order
                          Item #: PX-27402 -

                            Build and program two high-quality SumoBot® Robots designed to wrestle in the mini-sumo competition ring, included in the kit! The electronics consists of a surface-mounted BASIC Stamp® 2 module and an array of infrared sensors to detect your opponent and the edge of the Sumo Ring. Additional components include piezospeakers, resistors, pushbuttons and LEDs to build custom breadboard circuits for program mode selection and sensor state feedback. The hardware package includes black anodized...

                            3pi Expansion Kit with Cutouts - Black Pololu, 3pi, expansion, PCB
                            PO-979
                            Price: $19.95 In Stock
                            Item #: PO-979 -

                              This kit gives you everything you need to add a second level to your 3pi robot. The black printed circuit board matches the color of the 3pi and has cutouts that let you view the LCD below and make it easier to reach the power button, reset button, and programming header.   This kit includes a round printed circuit board (PCB) with holes spaced on a 0.100" grid, one extended 2×7 male header, two extended 2×1 male headers, a 2×7 female header, two 2×1 female headers, four 7/8" nylon...

                              Robot Geek 4C battery pack Robot Geek 4C battery pack
                              ASM-4CBATPAC
                              Price: $7.95 In Stock
                              Item #: ASM-4CBATPAC -

                                The Robot Geek 4C Battery Holder comes with a mounting plate and convenient 90 degree barrel plug to save space. The mounting bracket conforms to the Robot Geek 1 X 1 CM grid allowing you to mount your battery pack anywhere you like on your projects!

                                RobotGeek 1" Pastic Ball Caster
                                ASM-RG-CASTER
                                Price: $4.95 In Stock
                                Item #: ASM-RG-CASTER -

                                  A simple but effective design, the Robot Geek 1-inch Ball Caster is meant to keep your mobile platform moving freely. Laser-cut Acrylic parts with an array of standoffs make assembly and mounting of various sizes easy. The 1-inch Acetal ball’s natural lubricity and resistance to moisture are advantageous to any mobile robotics platform. The total height of this ball caster is 1.1" with no spacers, you can also adjust the height by adding spacers and standoffs. Additional mounting...

                                  Robot Geek Duino Mount
                                  ASM-RG-DUINOMNT
                                  Price: $5.95 In Stock
                                  Item #: ASM-RG-DUINOMNT -

                                    The Duino Mounting Plate converts the Arduino three hole pattern to the standard Robot Geek hole pattern. All Robot Geek kits, sensors, and components conform to a 1 x 1 centimeter grid making it easy to custom build your projects any way you desire. The Duino Mounting Plate allows you to easily mount and move your Arduino boards anywhere you want on your Robot Geek projects.*NOTE: The Duino Mounting plate does not come with the Geekduino.

                                    Robot Geek Sharp IR Sensor Mount
                                    ASM-IRSMOUNT
                                    Price: $3.95 In Stock
                                    Item #: ASM-IRSMOUNT -

                                      The Robot Geek Sharp IR Sensor Mount allows you to mount a Sharp IR distance sensor on a 9g servo or on standoffs to mount on Robot Geek kits. The mount conforms to the Robot Geek 1 X 1 CM grip pattern allowing you to have extreme flexibility in mounting your IR range sensors.The Mounting Kit comes with: 2 X M3*10 F/F Standoffs 2 X M3*20 F/F Standoffs 2 X M3*30 F/F Standoffs 2 X M3*15 M/F Standoffs Necessary nuts, bolts, and mounting plates ...