Home > Robot Parts > Controllers & Computers > PWM & Advanced Signal Driven DC Motor Controllers >

HB-25 Motor Controller

Price:	$49.99
Availibility:	In Stock
Item #:	PX-29144

Quantity:

Quantity Count	Price Each
10-25	$47.49
26-50	$46.49
51-100	$44.99
101+	$42.99

Description

The Parallax HB-25 Motor Controller is one of our best solutions for DC motor control. This module is dependable and highly-compatible with any microcontroller that can generate a servo compatible pulse. In the simplest sense the HB-25 allows a DC Motor to be controlled much like a Continuous Rotation Servo. While the signals are compatible, the HB-25 does not require refreshing as a servo does. A single pulse can maintain the output.

The HB-25 Motor Controller has the following specifications:
- Motor Size: 0.5 HP Max - No Minimum
- Motor Supply: 6.0vdc min - 16.0vdc max
- Logic Supply: N/A - Internal Regulator
- Load Current: 25A Continuous 35A Surge (13.8v)
- Standby Current: 50ma@6v 80ma@13.8v (fan on)
- PWM Frequency: 9.2 KHz
- Pulse Input: 1.0ms Full Reverse, 1.5ms Neutral (off), 2.0ms Full Forward
- Pulse Refresh Rate: N/A - Single Pulse Operation
- Modes: Single/Dual Motor Control
- Protection Circuits: Over Voltage, Over Current, Over Temp.
- Fault Reset: Automatic
- Indicators: Power (green), Fault (red)
- Fuse: Mini ATC Standard
- Cooling: Forced Air - Ball Bearing Fan
- Terminals: Screw Post with 35A Rating
- Weight: 2.5oz (71 grams)
- Size: 1.6"x1.6"x1.9"
- Mounting: 2ea 6-32 screws on .800" centers
- Included: (1) 25 A Fuse

This product has additional special features:

Single pulse required to set motor speed.
A single BASIC Stamp port can control two HB 25s
On-board fuse and full rating terminal lugs
Works with any size motor up to 1/2 HP
Contains both H-Bridge and Controller
Connector allows you to daisy chain two HB-25s

Note: Connection cable is not included

Downloads: