Wheels and Accessories
Wheels and Accessories

Show
Single Wheel and Hub Single Wheel and Hub
ASM-WHEEL-HUB
Price: $10.95 In Stock
Item #: ASM-WHEEL-HUB -

    This Single Wheel and Hub Set is the same one used in our Robot DC Gearhead Motor & Wheel Starter Kit . This Wheel and Hub set can be used with 6mm diameter shafts. Our hubs are designed for a 25mm long shaft, though they can accomadate longer shafts. 3mm tapped holes are available to tighten the hub to the shaft as well as attach the wheels to the hub. The wheel is 90mm in diameter (including the rubber tire). Each Kit Includes Aluminum Hub Wheel Plates & Hardware (makes one 90mm diameter...

    Parallax Caster Wheel Kit
    PX-28961
    Price: $79.99 Back Order
    Item #: PX-28961 -

      The caster wheel kit is the utmost in quality and performance. It features precision machined 6061 aluminum parts combined with high quality ball bearings and durable 3-inch Du-Bro pneumatic rubber tires. The dual independent tire design reduces vibration and drag, while also increasing its load-carrying capacity. You will be amazed at how smoothly and silently these caster wheels roll. Cheaper alternatives often use stamped sheet metal bearing tracks which tend to be sloppy and can easily...

      Pololu Ball Caster with 3/8 Inch Plastic Ball
      PO-950
      Price: $2.99 In Stock
      Item #: PO-950 -

        Overview This ball caster kit includes a black ABS housing, a 3/8" diameter plastic ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of this ball caster is 0.4" with no spacers. You can also adjust the height by adding the spacers. The ball caster can be mounted to a chassis by the two screw sets included in the kit. The distance between the two screw holes is 0.53". ...

        Robot DC Gearhead Motor & Wheel Starter Kit  Robot Motor Wheel Kit, DC Gearhead Motor Starter Kit, Motor Encoder, Gearhead Motor Encoder, Gearhead Motor, Robot Gearhead Motor, Robot Gearhead Motor Encoder
        KIT-MTR-WHL
        Price: $89.95 In Stock
        Item #: KIT-MTR-WHL -

          Get your rover rolling with our new custom Robot DC Gearhead Motor & Wheel Starter Kit. Each kit comes with 2 motors and wheel sets as well as a pair of brackets to mount your motors to your robot. Each wheel is 90mm in diameter (including the rubber tire). The motors in this kit use Hall Effect Quadrature sensors to achieve an encoder output of 520 ticks/revolution, allowing you to control the motors very precisely. Each motor includes a 6-pin cable that breaks out motor inputs and the...

          Pololu Ball Caster with 1/2 Inch Plastic Ball
          PO-952
          Price: $3.99 In Stock
          Item #: PO-952 -

            Overview This ball caster kit includes a black ABS housing, a 1/2" diameter plastic ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of this ball caster is 0.53" with no spacers. You can also adjust the height by adding the spacers. The ball caster can be mounted to a chassis by the two screw sets included in the kit. The distance between the two screw holes is 0.58". ...

            Aluminum Motor Mount for GHM 1 - 4 / 12 - 13 (pair)
            LM-MMT-02
            Price: $7.95 Back Order
            Item #: LM-MMT-02 -

              High quality black anodized brushed aluminum. Heavy duty .0625" stock. Works with Lynxmotion motors GHM-01 thru GHM-03.

              Pololu Ball Caster with 3/4 Inch Plastic Ball
              PO-954
              Price: $5.99 In Stock
              Item #: PO-954 -

                Overview This ball caster kit includes a black ABS housing, a 1/2" diameter plastic ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of this ball caster is 0.91" with no spacers. You can also adjust the height by adding the spacers. The ball caster can be mounted to a chassis by the two screw sets included in the kit. The distance between the two screw holes is 0.24". ...

                Pololu Ball Caster with 1 Inch Plastic Ball
                PO-956
                Price: $6.99 Back Order
                Item #: PO-956 -

                  Overview This ball caster kit includes a black ABS housing, a 1/2" diameter plastic ball, two spacers (1/16" and 1/8" thick), and three #2 screw sets. The total height of this ball caster is 1.1" with no spacers. You can also adjust the height by adding the spacers. The ball caster can be mounted to a chassis by the three screw sets included in the kit. The distance between the two screw holes is 0.70". ...

                  37D mm Metal Gearmotor Bracket Pair 37D mm Metal Gearmotor Bracket Pair, Gearmotor Bracket, Pololu, 37D mm Metal Gearmotor, Robot Bracket, Robot Motor Bracket
                  PO-1084
                  Price: $7.95 In Stock
                  Item #: PO-1084 -

                    These light-weight brackets (under 15 g each) are specifically designed for the Pololu 37D mm metal gearmotors, such as the 19:1 metal gearmotor 37Dx52L mm and the 19:1 metal gearmotor 37Dx52L mm with 64 CPR encoder. Each bracket features seven mounting holes for M3 or #4-size screws along each edge, giving you a variety of mounting options. A total of twelve M3 screws (six for each bracket) are included for securing the motor to the bracket. NOTE: This set contains 2 brackets and DOES NOT...

                    Gear Motor w/ Wheel Set gear motor wheel set, gear motor,RG90 Gear Motor, MOT-VIB08, Gear Motor, gearmotor, 6v gearmotor, 90rpm, 1:120, Arduino Motor, Robot Motor
                    ASM-GM-WHL-SET
                    Price: $18.50 In Stock
                    Item #: ASM-GM-WHL-SET -

                      This kit is a combination of two RG 90 Gear Motors and two matching Gear Motor Wheels.The variety of mounting holes on the gear motors will make them easy to mount to almost any chassis. With a weight of 18g, this set is a great choice for small robots and rovers. RG90 Gear Motor Operating Voltage 6V No Load Speed 90 RPM No Load Current 150 mA Stall Current 800 mA Output Torque 1.2 kg/cm Gear Ratio 1:120 Overall Dimensions 54x42x23mm Weight 35 grams Technical Drawing                          ...

                      Gear Motor Acrylic Wheel Assembled
                      ASM-GMW
                      Price: $3.50 In Stock
                      Item #: ASM-GMW -

                        Do you need a wheel for your latest rover? Try our new Gear Motor Wheels! These wheels are made of a red acrylic, wrapped in a black rubber tire. Each wheel has a double-flat, 7mm in diameter hole -prefect for our RG 90 Gear Motors! Just use the included hardware to attach the wheels to the motors and your robot will be rolling in no time.

                        RobotGeek 1" Pastic Ball Caster
                        ASM-RG-CASTER
                        Price: $6.95 In Stock
                        Item #: ASM-RG-CASTER -

                          A simple but effective design, the Robot Geek 1-inch Ball Caster is meant to keep your mobile platform moving freely. Laser-cut Acrylic parts with an array of standoffs make assembly and mounting of various sizes easy. The 1-inch Acetal ball’s natural lubricity and resistance to moisture are advantageous to any mobile robotics platform. The total height of this ball caster is 1.1" with no spacers, you can also adjust the height by adding spacers and standoffs. Additional mounting...