The DYNAMIXEL communication bus allows you to daisy chain multiple servos, making wiring a breeze. However sometimes you need to split your DYNAMIXEL chain into multiple directions. Just plug a 3-Pin Dynamixel X-Series Cable from your controller to any port on the hub, and you'll have 5 ports available for DYNAMIXEL servos.
This hub has the added benefit of 2 power breakouts. You can plug in bare wire with the screw terminal block, or plug in power through the DC barrel jack. The 2.1*5.5 female barrel jack will accept any of our SMPS power supplies as well as our Battery Wiring Harness.
Compatible Dynamixel Cables
Compatible Dynamixel Servos
This hub is NOT compatible with the 4-pin RX and EX series of DYNAMIXEL servos.
This hub is NOT compatible with the 3-pin AX/MX series of DYNAMIXEL servos