Item #: ED-ARD -
This board provides your Edison with the ability to interface with Arduino Shields, or essentially any board with an Arduino footprint, giving you access to extensive shield libraries and resources. Pins are laid out in the same location arrangement as on the Arduino Uno R3 (Arduino 1.0 pinout). This breakout includes a micro USB device connector and a dedicated standard size USB 2.0 host Type-A connector selected via a mechanical microswitch, a UART2 connected micro USB device port, and a...
Item #: ED-IOTMOD -
The Intel® Edison is a incredible tiny computer - at 35.5 × 25.0 × 3.9 mm, it's about the size of an SD card! But despite its tiny stature, this little board boasts some big power. With a dual core, dual threaded Intel® Atom CPU running at 500mhz and 1GB of RAM, the Intel® Edison has no problem running Yocto Linux 1.6. This board even has an additional 32 bit Intel® Quark microcontroller running1 at 100MHz and 4GB of flash storage. And don't forget about wireless connectivity - the Intel®...
Item #: ED-BREAKOUT -
This basic breakout board is slightly larger than the Edison module, giving you easy access to a basic set of features without heavily increasing its footprint. The board has a USB OTG with USB micro type-AB connector, a USB OTG power switch, a USB to device UART bridge with micro type-B connector, a battery charger, and a power supply. It exposes the native 1.8V I/O of the Edison module, and gives you a 0.1 inch grid I/O array of through-hole solder points to work with. The Intel® Edison is a...
Item #: MM-PI3 -
1.2GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM802.11n Wireless LAN, 10/100Mbps Lan SpeedBluetooth 4.1, Bluetooth Low Energy4 USB ports, 40 GPIO pins, Full HDMI port, Combined 3.5mm audio jack and composite videoCamera interface (CSI),Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), VideoCore IV 3D graphics coreRAM1 GBWireless Type 802.11bgnNumber of USB 2.0 Ports 4
Item #: C-900-RM-G145 -
The RoBoard RM-G144 Magnetic Compass, ±16 3-Axis Accelerometer Board combines the HMC5843, a 3-axis magneto-resistive sensor with the ADXL345, a 3-axis accelerometer. The communication is done via I2C and the sensor connects easily to the RB-100 and RB-110 single board computers. The dimension of this sensor is only 20 x 20 mm. The I2C interface cable is included. The HMC5843 is a surface mount multi-chip module designed for low field magnetic sensing with a digital interface for applications...
Item #: C-900-Roboard-Cables-110 -
RoBoard Interface Cable Set 2 Power cables 1 I2C Cable 1 RJ-45 connector cable for wired networking 1 2x5 cable for Com 6 Hi-Speed Serial 1 DB-9 serial connector cable 4 Comm breakout cables (4 pin) Additional Information, Datasheets, and Libraries
Item #: PH-1072 -
The PhidgetSBC is a fully functional Single Board Computer with an integrated PhidgetInterfaceKit 8/8/8. At its most basic, it can be thought of as a Phidget that you connect using a network cable instead of directly to the USB. The PhidgetSBC also provides four USB full-speed ports that allow you to use normal USB Phidgets over its network connection. This can extend the effective range of a Phidget from USB’s maximum of 15 feet, to anywhere that your network reaches. The PhidgetSBC exposes...