RobotGeek Rotation Knob arduino rotation knob, arduino rotation sensor, arduino knob sensor, arduino knob control, arduino rotation control
Price: $4.95
Availability: In Stock
Item #: ASM-RG-ROTKNOB -

    Do you need Rotation Knobs for your Arduino project? The RobotGeek Knob is good choice! It has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running immediatly. As with all RobotGeek sensors, the hole mounting pattern is on a 1x1 CM grid so they easily mount to the RobotGeek Workbenches or any other RobotGeek kit. Each sensor includes a mounting plate and all hardware needed to mount to any workbench or RobotGeek product that...

    RobotGeek Temperature Sensor RobotGeek, Temperature, temp, Sensor, thermometer, environment
    Price: $6.95
    Availability: In Stock
    Item #: ASM-RG-TEMP -

      Want to make your project kick into gear when life turns up the heat? The RobotGeek Temperature Sensor can feel its way through! With the 3-pin Sensor Cable standard, you can easily connect this to your project and start reading the temperature! Use it to activate your air conditioner, control the temperature in a cold frame, log the temperature of a greenhouse, or to monitor the temperature of a pie on the windowsill! The options are limitless and the temperature is accounted for. As with all...

      RobotGeek Joystick arduino joystick, arduino analog joystick, arduino joystick sensor, arduino joystick potentiometer
      Price: $5.95
      Availability: In Stock
      Item #: ASM-RG-JOYSTICKV2 -

        If you are looking for a good Arduino Joystick the RobotGeek Joystick is the best choice. We had these joysticks special made two joystick options; the standard mushroom top used in gaming controllers and a tall stick for much greater range of motion. The joystick has the standard RobotGeek three pin connection and plugs right into the RobotGeek Sensor Shield so you can be up and running immediatly. This arduino joystick is self centering and will return to the home position when let go. The...

        RobotGeek Pushbutton arduino pushbutton, arduino button, arduino button board, arduino digital button
        Price: $2.95
        Availability: In Stock
        Item #: ASM-RG-PUSHBUTTON -

          The RobotGeek Pushbutton is a self-contained Arduino Button board that makes it easy to add a pushbutton to your Arduino Project. This RobotGeek Pushbutton has a built in pull-down resistor, so the signal can be read as a digital input from your Arduino or other microcontroller. This Arduino Button Board has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running immediatly. As with all RobotGeek sensors, the hole mounting...

          Robot Geek Relay
          Price: $4.95
          Availability: In Stock
          Item #: ASM-RG-RELAY -

            Time to step up the voltage with this Arduino Relay Board. The Arduino platform is a great way to control lights, buzzers, displays and more - but what if you have a device that doesn't run on the Arduino's native 5 volts? One simple way to do it is to use the RobotGeek Relay. This little relay board will use a signal from a 5v microcontroller to make a mechanical connection. This connection is physically seprated from the arduino, meaning you can connect devices that have different voltages...

            RobotGeek Tilt Sensor arduino tilt sensor, tilt sensor, arduino digital tilt senor, arduino tilt senor board
            Price: $4.95
            Availability: In Stock
            Item #: ASM-RG-TILTSEN -

              The RobotGeek Tilt Sensor is a fast and flexible way to add an Arduino tilt senor Project. By reading this sensor as a digital input, you can determine if an object the sensor is mounted on tilted or not. This sensor is unique because of the orientation of its ports. Instead of having the tilt switch soldered into the board, there are two 2-pin female ports. This allows you to orient your tilt vertically or horizontally to suit your project best. If you need your tilt switch to be further away...

              RobotGeek Buzzer arduino buzzer, arduino buzzer board, arduino speaker, arduino piezo, arduino piezo board
              Price: $3.95
              Availability: In Stock
              Item #: ASM-RG-BUZZER -

                Get buzzing with this Arduino Buzzer! The RobotGeek Buzzer is an easy way to add audio output to your Arduino. By simply sending a 5v signal to the RobotGeek Buzzer, the device will emit a tone. You can also use the Arduino Tone Function to send different tones to the buzzer. NOTE:some frequencies will work better than others with this piezo buzzer. This Arduino Buzzer has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running...

                PIR Wide Angle Sensor
                Price: $10.99
                Availability: In Stock
                Item #: KIT-00081 -

                  The PIR(Passive Infra-Red) Sensor is a pyroelectric device that detects motion by sensing changes in the infrared(radiant heat) levels emitted by surrounding objects.Each Wide Angle PIR Sensor cable includes a 4-pin cable, as well as a mount and hardware to adapt to all RobotGeek products with a centimeter grid pattern (Workbenches, Geekbot, etc.). Mount it at a right angle, and flat.Product FeaturesSingle bit output Small size On-board LEDs Power 3V to 6VDC operation 150uA idle, 3mA active(no...

                  10x 100mm Aluminum M3 Standoff M/F 100mm, metal, Aluminum, M3, Standoff, M/F, male to female, male, female, extension
                  Price: $6.95
                  Availability: In Stock
                  Item #: ASM-MF100 -

                    Need to make a really tall robot? Not enough horizontal space on your workbench and you want to expand vertically? Is your Geekbot tall, but not quite imposing enough? With the 100mm Aluminum M3 Standoff M/F, you can add a whopping 10 centimeters in height to your project. Made of solid Aluminum these are light and strong, giving you a sturdy mounting point for any project! This pack includes eight Standoffs, which is enough to make your geekbot, snapper, or turret taller. With the male end,...

                    10x 100mm Aluminum M3 Standoff F/F 100mm, metal, Aluminum, M3, Standoff, F/F, female to female, female, 10cm
                    Price: $6.95
                    Availability: In Stock
                    Item #: ASM-FF100 -

                      Need to make a really tall robot? Not enough horizontal space on your workbench and you want to expand vertically? Is your Geekbot tall, but not quite imposing enough? With the 100mm Aluminum M3 Standoff F/F, you can add a whopping 10 centimeters in height to your project. Made of solid Aluminum these are light and strong, giving you a sturdy mounting point for any project! This pack includes eight Standoffs, which is enough to make your geekbot, snapper, or turret taller. ...

                      RobotGeek Voltage Divider RobotGeek Voltage Divider, Robot Geek Voltage Divider, Voltage Divider, FSR Voltage Divider, Force Sensitive Resistor Voltage Divider, FSR Interface, FSR Analog Interface
                      Price: $4.95
                      Availability: In Stock
                      Item #: ASM-RG-VOLTDIV -

                        The RobotGeek Voltage Divider is a simple yet effective way to turn a variable resistor, such as an FSRs, Softpots, or Pressure Sensors into a tunable 0-5v analog signal. The design is super simple and completely open source, but saves tinkerers from having to breadboard a potentiometer of their own. A 2 position terminal block and 0.1" spaced header are available for sensor input, a 3 pos right angle header breaks out Analog output, 5v input, and Gnd. Each sensor includes necessary...

                        RobotGeek Snapper Arduino Robotic Arm Arduino Robot arm, hobby Robot Arm, Arudino Robotic Arm, programmable Arduino robot arm, programmable hobby robot arm
                        Price: $229.95
                        Availability: In Stock
                        Item #: RG-SNAPPER -

                          The Snapper Robot Arm is a perfect entry level kit for getting started with Arduino and robotics. This Arduino Robot Arm is aimed at those looking for robot kits for hobby and education. The Snapper is based on the open source Arduino controller and the extremely modular RobotGeek family of parts, sensors, and components. The robot arm can be easily modified and upgraded for many different types of projects. Joystick Control 5 DOF Arduino Control Strong Parallel Gripper Powerful 13 kg-cm...